CCSModuleSW30Web/Core/Src/main.c

/* USER CODE BEGIN Header */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "adc.h"
#include "can.h"
#include "crc.h"
#include "rtc.h"
#include "tim.h"
#include "usart.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "can.h"
#include "board.h"
#include <stdio.h>
#include "debug.h"
#include "charger_gbt.h"
#include "soft_rtc.h"
#include "j1939.h"
#include "lock.h"
#include "connector.h"
#include "serial_control.h"
#include "charger_config.h"

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

/**
  * @brief  Vector base address configuration. It should no longer be at the start of
  *         flash memory but moved forward because the first part of flash is
  *         reserved for the bootloader. Note that this is already done by the
  *         bootloader before starting this program. Unfortunately, function
  *         SystemInit() overwrites this change again.
  * @return none.
  */
static void VectorBase_Config(void)
{
  /* The constant array with vectors of the vector table is declared externally in the
   * c-startup code.
   */
  extern const unsigned long g_pfnVectors[];

  /* Remap the vector table to where the vector table is located for this program. */
  SCB->VTOR = (unsigned long)&g_pfnVectors[0];
}

uint8_t ED_TraceWarning(uint8_t flag, uint8_t id){
  static uint8_t memory[32];
  if(id > 31) return 0;
  uint8_t result = 0;
  if(memory[id] != flag){
    result = 1;
  }
  memory[id] = flag;
  return result;
}


void ED_Delay(uint32_t Delay)
{
  uint32_t tickstart = HAL_GetTick();
  uint32_t wait = Delay;

  /* Add a freq to guarantee minimum wait */
  if (wait < HAL_MAX_DELAY)
  {
    wait += (uint32_t)(uwTickFreq);
  }

  while ((HAL_GetTick() - tickstart) < wait){
    CONN_CC_ReadStateFiltered();
    GBT_ManageLockMotor();
    CONN_Task();
    GBT_ChargerTask();
    LED_Task();
    SC_Task();
  //  if(huart2.gState != HAL_UART_STATE_BUSY_TX) debug_buffer_send(); // TEST
  }
}

void StopButtonControl(){

	//Charging do nothing
	if(!IN_ReadInput(IN_ESTOP)){
		CONN.connControl = CMD_STOP;
	}

}

uint8_t temp0, temp1;

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{

  /* USER CODE BEGIN 1 */
  VectorBase_Config();
  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */
  HAL_RCC_DeInit();
  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_ADC1_Init();
  MX_CAN1_Init();
  MX_CAN2_Init();
  MX_RTC_Init();
  MX_TIM4_Init();
  MX_USART2_UART_Init();
  MX_CRC_Init();
  MX_UART5_Init();
  MX_USART1_UART_Init();
  MX_USART3_UART_Init();
  /* USER CODE BEGIN 2 */
  Init_Peripheral();
  LED_Init();

  HAL_Delay(300);
  GBT_Init();
  SC_Init();
  log_printf(LOG_INFO, "GBT Charger v%d.%d\n", GBT_CH_VER_MAJOR, GBT_CH_VER_MINOR);
  ReadVersion();
  log_printf(LOG_INFO, "Serial number: %d\n", infoPacket.serialNumber);
  log_printf(LOG_INFO, "Board revision: %d\n", infoPacket.boardVersion);
  log_printf(LOG_INFO, "FW version: %d.%d.%d\n", infoPacket.fw_version_major, infoPacket.fw_version_minor, infoPacket.fw_version_patch);
  GBT_SetConfig();
  GBT_CAN_ReInit();
  PSU_Init();
  CONN_Init();

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */


    PSU_ReadWrite();
    PSU_Task();
    ED_Delay(10);
    METER_CalculateEnergy();
    CONN_Loop();
    LED_Write();
    ED_Delay(10);
    StopButtonControl();
    ED_Delay(50);

  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE|RCC_OSCILLATORTYPE_LSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV5;
  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.Prediv1Source = RCC_PREDIV1_SOURCE_PLL2;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  RCC_OscInitStruct.PLL2.PLL2State = RCC_PLL2_ON;
  RCC_OscInitStruct.PLL2.PLL2MUL = RCC_PLL2_MUL8;
  RCC_OscInitStruct.PLL2.HSEPrediv2Value = RCC_HSE_PREDIV2_DIV5;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_ADC;
  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
  PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
  {
    Error_Handler();
  }

  /** Configure the Systick interrupt time
  */
  __HAL_RCC_PLLI2S_ENABLE();
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */