raduet/CCSModuleSW30Web
1
0
Fork 0
forked from achamaikin/CCSModuleSW30Web
Code Pull Requests Activity

Compare commits

base: raduet/CCSModuleSW30Web:92c33b2f46504d44d89fe9024a9e27a2a06bdfae
Branches Tags
raduet/CCSModuleSW30Web:master achamaikin/CCSModuleSW30Web:master
raduet/CCSModuleSW30Web:v1.0.27
..
compare: raduet/CCSModuleSW30Web:master
Branches Tags
raduet/CCSModuleSW30Web:master achamaikin/CCSModuleSW30Web:master
raduet/CCSModuleSW30Web:v1.0.27
18 Commits
92c33b2f46 .. master
Author SHA1 Message Date
raduetandCursor b98207da4c Add SET_LIGHTING (0xB1) and AC22-style init LED shimmer. 
Mutable status palette over serial; Unknown uses HSV saturation pulse instead of dim-red/fade-to-black.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-30 17:12:09 +02:00
raduetandCursor 940e3f4a3d Add charging-phase PSU sudden-off diagnostics (v1.0.28). 
Observability only: log can_lost/output_lost and status flags during Charging, without changing PSU recovery behavior.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-12 01:03:13 +02:00
raduetandCursor fdc83c5b9f Clean repo hygiene: drop junk, normalize docs layout. 
Remove chat/testplan/zip/scratch docs; move PDFs/scripts/board-rev ioc; standardize README + docs/.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-11 23:53:49 +02:00
raduetandCursor 52d4685673 Standardize .gitignore and untrack build/IDE artifacts; keep firmware images only. 
Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-11 23:40:12 +02:00
raduetandCursor af8bbd5275 Expose charging session elapsed time in monitoring packet (v1.0.27). 
CONN.ChargingTime ticks at 1 Hz during Charging; serial GET_STATUS reports elapsed min/sec instead of zero stubs.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-08 11:29:01 +02:00
raduetandCursor 96826da0e0 Add PSU diagnostic logging for setpoints and state transitions (v1.0.26). 
Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-06 09:19:36 +02:00
raduetandCursor 49a4fd8ee1 Replace hv_mode gate with CS60 hv_limit logic for unrestricted HV setpoints (v1.0.25). 
Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-06-30 19:27:47 +02:00
raduet 86b0bfc0fc Remove FAKE_500V Everest workaround; use real setpoints on the bus (v1.0.24). 2026-06-30 18:30:07 +02:00
raduetandCursor a583e12132 Add PSU fast discharge API for DC precharge step-down (v1.0.23). 
Policy/executor hooks, event-driven OFF/ON state machine, and release binaries.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-06-30 16:28:25 +02:00
raduetandCursor ecf8e3d2f0 Build artifacts updated. 
Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-06-17 12:43:15 +02:00
achamaikin 622644a6a1 added WS2812 support 2026-06-12 12:17:57 +03:00
achamaikin ac1ce30121 Add fire alarm support and update firmware version to 1.0.19 
- Introduced CONN_ERR_FIRE_ALARM to handle fire alarm conditions in charger control.
- Added CMD_FIRE_ALARM command for external trigger handling in serial control.
- Updated firmware version from 1.0.17 to 1.0.19.
- Integrated fire alarm functionality into the charging loop and command handler.
 2026-06-11 15:33:22 +03:00
achamaikin 3037ae2368 board rev2 support, added heater support 2026-06-04 10:35:01 +03:00
achamaikin 414d2cba60 clean project 2026-05-09 14:02:54 +03:00
achamaikinandCursor c8f91af7da cleanup project 
Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-05-09 13:20:17 +03:00
achamaikinandCursor e8b3ed90cd Overwrite repository contents with fork state. 
Replace outdated files with the latest working tree from fork/CCSModuleSW30Web to align source and generated artifacts.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-05-09 13:16:13 +03:00
achamaikin 28d63c7270 latest version before merge 2026-05-05 12:25:11 +03:00
achamaikin c59d150b23 Update firmware version to 1.0.10, add hv_tick parameter to PSU control, enhance serial control with response handling, and improve stop button control logic. 2026-04-13 20:01:44 +03:00
136 changed files with 12121 additions and 70891 deletions
Expand all files Collapse all files
.DS_Store
Vendored
BIN
View File
Binary file not shown.
.cproject
Executable
+187
View File
@@ -0,0 +1,187 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
<storageModule moduleId="org.eclipse.cdt.core.settings">
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1370229639">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1370229639" moduleId="org.eclipse.cdt.core.settings" name="Debug">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1370229639" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1370229639." name="/" resourcePath="">
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.1017099221" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.1244048691" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F107VCTx" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1379215735" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.960532971" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1990552137" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1586976077" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32F107VCTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../Drivers/STM32F1xx_HAL_Driver/Inc | ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy | ../Drivers/CMSIS/Device/ST/STM32F1xx/Include | ../Drivers/CMSIS/Include || || || USE_HAL_DRIVER | STM32F107xC || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32F107VCTX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None || || || " valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.82282192" name="Cpu clock frequence" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="72" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.nanoprintffloat.808472221" name="Use float with printf from newlib-nano (-u _printf_float)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.nanoprintffloat" useByScannerDiscovery="false" value="true" valueType="boolean"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.converthex.400501462" name="Convert to Intel Hex file (-O ihex)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.converthex" useByScannerDiscovery="false" value="true" valueType="boolean"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertsrec.519949918" name="Convert to Motorola S-record file (-O srec)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertsrec" useByScannerDiscovery="false" value="true" valueType="boolean"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertbinary.1730912092" name="Convert to binary file (-O binary)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertbinary" useByScannerDiscovery="false" value="true" valueType="boolean"/>
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1026339783" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
<builder buildPath="${workspace_loc:/GbTModuleSW}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.653659782" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1272315080" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.370357426" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.1924718806" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
<listOptionValue builtIn="false" value="DEBUG"/>
</option>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.340226531" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
<listOptionValue builtIn="false" value="/Users/colorbass/STM32CubeIDE/workspace_1.12.0/lib_EDCAN"/>
</option>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.602034741" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.129443933" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.150601486" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.2041244846" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.o0" valueType="enumerated"/>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.504560065" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="DEBUG"/>
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
<listOptionValue builtIn="false" value="STM32F107xC"/>
</option>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.452593111" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
<listOptionValue builtIn="false" value="../Core/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F1xx_HAL_Driver/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F1xx/Include"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
</option>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1408123272" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.2070441151" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1543951018" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.2049580629" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.2102490823" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.272103658" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F107VCTX_FLASH.ld}" valueType="string"/>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.266162782" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
</inputType>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.502005820" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1392625179" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.771001125" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1682381984" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.467663480" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1608796910" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1767624081" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.139156618" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1422585447" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
</cconfiguration>
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1286135127">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1286135127" moduleId="org.eclipse.cdt.core.settings" name="Release">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1286135127" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1286135127." name="/" resourcePath="">
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.368317543" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.1083778044" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F107VCTx" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1672048738" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.716214807" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1611406059" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.2026840843" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32F107VCTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../Drivers/STM32F1xx_HAL_Driver/Inc | ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy | ../Drivers/CMSIS/Device/ST/STM32F1xx/Include | ../Drivers/CMSIS/Include || || || USE_HAL_DRIVER | STM32F107xC || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32F107VCTX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None || || || " valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.1744697906" name="Cpu clock frequence" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="72" valueType="string"/>
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1433680358" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
<builder buildPath="${workspace_loc:/GbTModuleSW}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1316679712" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1810954687" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1184417617" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.679037772" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.2023937975" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.2061465690" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.463973701" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1124370999" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
<listOptionValue builtIn="false" value="STM32F107xC"/>
</option>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.2130633236" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
<listOptionValue builtIn="false" value="../Core/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F1xx_HAL_Driver/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F1xx/Include"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
</option>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.139233432" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.77997183" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.954735929" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1509118949" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.455795129" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.135018481" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F107VCTX_FLASH.ld}" valueType="string"/>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.850565080" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
</inputType>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1304115760" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.2125898682" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.862607409" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.268643843" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.2012318786" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.25627582" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1856490045" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.573281510" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.336799426" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
</cconfiguration>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.pathentry"/>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<project id="GbTModuleSW.null.359723610" name="GbTModuleSW"/>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
<storageModule moduleId="scannerConfiguration">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1286135127;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1286135127.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.2023937975;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.139233432">
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
</scannerConfigBuildInfo>
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1370229639;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1370229639.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.129443933;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1408123272">
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
</scannerConfigBuildInfo>
</storageModule>
<storageModule moduleId="refreshScope" versionNumber="2">
<configuration configurationName="Debug">
<resource resourceType="PROJECT" workspacePath="/GbTModuleSW"/>
</configuration>
<configuration configurationName="Release">
<resource resourceType="PROJECT" workspacePath="/GbTModuleSW"/>
</configuration>
</storageModule>
</cproject>
.gitignore
+83 -112
View File
@@ -1,129 +1,100 @@
# ---> C
# Prerequisites
*.d
# =============================================================================
# STM32 / ARM GCC / STM32CubeIDE — standardized firmware .gitignore
# Track: sources + final firmware images (*.elf *.bin *.hex *.srec)
# Ignore: build intermediates, IDE noise, logs, captures, backups
#
# NOTE: Only root /Debug /Release /Build are build dirs.
# Do NOT use **/Debug — on Windows (core.ignorecase) that also matches
# source folders like Libs/**/DEBUG/.
# =============================================================================
# Object files
# -----------------------------------------------------------------------------
# Build dirs (project root only): ignore all, then re-include firmware images
# -----------------------------------------------------------------------------
/Debug/*
!/Debug/
/Release/*
!/Release/
/Build/*
!/Build/
# -----------------------------------------------------------------------------
# Object / dependency / analysis outputs (any path)
# -----------------------------------------------------------------------------
*.o
*.ko
*.obj
*.elf
# Linker output
*.ilk
*.map
*.exp
# Precompiled Headers
*.gch
*.pch
# Libraries
*.lib
*.a
*.la
*.lo
# Shared objects (inc. Windows DLLs)
*.dll
*.so
*.so.*
*.dylib
# Executables
*.exe
*.out
*.app
*.i*86
*.x86_64
*.hex
# Debug files
*.dSYM/
*.d
*.su
*.idb
*.pdb
*.cyclo
# Kernel Module Compile Results
*.mod*
*.cmd
.tmp_versions/
modules.order
Module.symvers
Mkfile.old
dkms.conf
# ---> CMake
CMakeLists.txt.user
CMakeCache.txt
CMakeFiles
CMakeScripts
Testing
# -----------------------------------------------------------------------------
# Generated make fragments (CubeIDE)
# -----------------------------------------------------------------------------
*.mk
makefile
Makefile
cmake_install.cmake
install_manifest.txt
compile_commands.json
CTestTestfile.cmake
_deps
objects.list
objects.mk
sources.mk
subdir.mk
# ---> Eclipse
.metadata
bin/
tmp/
*.tmp
# -----------------------------------------------------------------------------
# Linker listings (not needed in repo)
# -----------------------------------------------------------------------------
*.map
*.list
# -----------------------------------------------------------------------------
# Backups / temp
# -----------------------------------------------------------------------------
**/Backup/
*.bak
*.tmp
*.swp
*~.nib
local.properties
*.swo
*~
# -----------------------------------------------------------------------------
# IDE / tooling (local machine)
# -----------------------------------------------------------------------------
.settings/
.loadpath
.recommenders
# External tool builders
.mxproject
.externalToolBuilders/
# Locally stored "Eclipse launch configurations"
.metadata/
.idea/
*.launch
*.code-workspace
# PyDev specific (Python IDE for Eclipse)
*.pydevproject
# -----------------------------------------------------------------------------
# Logs / analyzer captures
# -----------------------------------------------------------------------------
log.txt
log*.txt
*.log
*.asc
# CDT-specific (C/C++ Development Tooling)
.cproject
# -----------------------------------------------------------------------------
# OS junk
# -----------------------------------------------------------------------------
.DS_Store
Thumbs.db
# CDT- autotools
.autotools
# =============================================================================
# Keep final firmware images under root build dirs
# =============================================================================
!/Debug/*.elf
!/Debug/*.bin
!/Debug/*.hex
!/Debug/*.srec
!/Release/*.elf
!/Release/*.bin
!/Release/*.hex
!/Release/*.srec
!/Build/*.elf
!/Build/*.bin
!/Build/*.hex
!/Build/*.srec
# Java annotation processor (APT)
.factorypath
# PDT-specific (PHP Development Tools)
.buildpath
# sbteclipse plugin
.target
# Tern plugin
.tern-project
# TeXlipse plugin
.texlipse
# STS (Spring Tool Suite)
.springBeans
# Code Recommenders
.recommenders/
# Annotation Processing
.apt_generated/
.apt_generated_test/
# Scala IDE specific (Scala & Java development for Eclipse)
.cache-main
.scala_dependencies
.worksheet
# Uncomment this line if you wish to ignore the project description file.
# Typically, this file would be tracked if it contains build/dependency configurations:
#.project
# IDE local
.vscode/
.mxproject
-41
View File
File diff suppressed because one or more lines are too long
.vscode/settings.json
Vendored
-6
View File
@@ -1,6 +0,0 @@
{
"files.associations": {
"charger_config.h": "c",
"charger_gbt.h": "c"
}
}
CCSModuleSW30Web.ioc
+97 -45
View File
@@ -6,7 +6,7 @@ ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_9
ADC1.Channel-4\#ChannelRegularConversion=ADC_CHANNEL_TEMPSENSOR
ADC1.Channel-5\#ChannelRegularConversion=ADC_CHANNEL_VREFINT
ADC1.ExternalTrigConv=ADC_EXTERNALTRIGCONV_T3_TRGO
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,Rank-4\#ChannelRegularConversion,Channel-4\#ChannelRegularConversion,SamplingTime-4\#ChannelRegularConversion,Rank-5\#ChannelRegularConversion,Channel-5\#ChannelRegularConversion,SamplingTime-5\#ChannelRegularConversion,NbrOfConversion,ExternalTrigConv
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,Rank-4\#ChannelRegularConversion,Channel-4\#ChannelRegularConversion,SamplingTime-4\#ChannelRegularConversion,Rank-5\#ChannelRegularConversion,Channel-5\#ChannelRegularConversion,SamplingTime-5\#ChannelRegularConversion,NbrOfConversion,ExternalTrigConv,master
ADC1.NbrOfConversion=6
ADC1.NbrOfConversionFlag=1
ADC1.Rank-0\#ChannelRegularConversion=1
@@ -54,10 +54,50 @@ Dma.ADC1.0.MemInc=DMA_MINC_ENABLE
Dma.ADC1.0.Mode=DMA_CIRCULAR
Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
Dma.ADC1.0.PeriphInc=DMA_PINC_DISABLE
Dma.ADC1.0.Priority=DMA_PRIORITY_HIGH
Dma.ADC1.0.Priority=DMA_PRIORITY_MEDIUM
Dma.ADC1.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
Dma.Request0=ADC1
Dma.RequestsNb=1
Dma.Request1=USART2_RX
Dma.Request2=USART2_TX
Dma.Request3=USART3_RX
Dma.Request4=USART3_TX
Dma.RequestsNb=5
Dma.USART2_RX.1.Direction=DMA_PERIPH_TO_MEMORY
Dma.USART2_RX.1.Instance=DMA1_Channel6
Dma.USART2_RX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
Dma.USART2_RX.1.MemInc=DMA_MINC_ENABLE
Dma.USART2_RX.1.Mode=DMA_NORMAL
Dma.USART2_RX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
Dma.USART2_RX.1.PeriphInc=DMA_PINC_DISABLE
Dma.USART2_RX.1.Priority=DMA_PRIORITY_VERY_HIGH
Dma.USART2_RX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
Dma.USART2_TX.2.Direction=DMA_MEMORY_TO_PERIPH
Dma.USART2_TX.2.Instance=DMA1_Channel7
Dma.USART2_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE
Dma.USART2_TX.2.MemInc=DMA_MINC_ENABLE
Dma.USART2_TX.2.Mode=DMA_NORMAL
Dma.USART2_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
Dma.USART2_TX.2.PeriphInc=DMA_PINC_DISABLE
Dma.USART2_TX.2.Priority=DMA_PRIORITY_HIGH
Dma.USART2_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
Dma.USART3_RX.3.Direction=DMA_PERIPH_TO_MEMORY
Dma.USART3_RX.3.Instance=DMA1_Channel3
Dma.USART3_RX.3.MemDataAlignment=DMA_MDATAALIGN_BYTE
Dma.USART3_RX.3.MemInc=DMA_MINC_ENABLE
Dma.USART3_RX.3.Mode=DMA_NORMAL
Dma.USART3_RX.3.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
Dma.USART3_RX.3.PeriphInc=DMA_PINC_DISABLE
Dma.USART3_RX.3.Priority=DMA_PRIORITY_VERY_HIGH
Dma.USART3_RX.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
Dma.USART3_TX.4.Direction=DMA_MEMORY_TO_PERIPH
Dma.USART3_TX.4.Instance=DMA1_Channel2
Dma.USART3_TX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE
Dma.USART3_TX.4.MemInc=DMA_MINC_ENABLE
Dma.USART3_TX.4.Mode=DMA_NORMAL
Dma.USART3_TX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
Dma.USART3_TX.4.PeriphInc=DMA_PINC_DISABLE
Dma.USART3_TX.4.Priority=DMA_PRIORITY_HIGH
Dma.USART3_TX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
File.Version=6
GPIO.groupedBy=Group By Peripherals
KeepUserPlacement=false
@@ -103,57 +143,62 @@ Mcu.Pin25=PB11
Mcu.Pin26=PD13
Mcu.Pin27=PD14
Mcu.Pin28=PD15
Mcu.Pin29=PA9
Mcu.Pin29=PC9
Mcu.Pin3=OSC_OUT
Mcu.Pin30=PA10
Mcu.Pin31=PA13
Mcu.Pin32=PA14
Mcu.Pin33=PA15
Mcu.Pin34=PC10
Mcu.Pin35=PC11
Mcu.Pin36=PC12
Mcu.Pin37=PD0
Mcu.Pin38=PD1
Mcu.Pin39=PD2
Mcu.Pin30=PA9
Mcu.Pin31=PA10
Mcu.Pin32=PA13
Mcu.Pin33=PA14
Mcu.Pin34=PA15
Mcu.Pin35=PC10
Mcu.Pin36=PC11
Mcu.Pin37=PC12
Mcu.Pin38=PD0
Mcu.Pin39=PD1
Mcu.Pin4=PC2
Mcu.Pin40=PD3
Mcu.Pin41=PD4
Mcu.Pin42=PD5
Mcu.Pin43=PD6
Mcu.Pin44=PD7
Mcu.Pin45=PB3
Mcu.Pin46=PB4
Mcu.Pin47=PB5
Mcu.Pin48=PB6
Mcu.Pin49=PB7
Mcu.Pin40=PD2
Mcu.Pin41=PD3
Mcu.Pin42=PD4
Mcu.Pin43=PD5
Mcu.Pin44=PD6
Mcu.Pin45=PD7
Mcu.Pin46=PB3
Mcu.Pin47=PB4
Mcu.Pin48=PB5
Mcu.Pin49=PB6
Mcu.Pin5=PC3
Mcu.Pin50=PB8
Mcu.Pin51=PB9
Mcu.Pin52=PE1
Mcu.Pin53=VP_ADC1_TempSens_Input
Mcu.Pin54=VP_ADC1_Vref_Input
Mcu.Pin55=VP_CRC_VS_CRC
Mcu.Pin56=VP_RTC_VS_RTC_Activate
Mcu.Pin57=VP_SYS_VS_Systick
Mcu.Pin58=VP_TIM3_VS_ClockSourceINT
Mcu.Pin59=VP_TIM3_VS_no_output1
Mcu.Pin50=PB7
Mcu.Pin51=PB8
Mcu.Pin52=PB9
Mcu.Pin53=PE1
Mcu.Pin54=VP_ADC1_TempSens_Input
Mcu.Pin55=VP_ADC1_Vref_Input
Mcu.Pin56=VP_CRC_VS_CRC
Mcu.Pin57=VP_RTC_VS_RTC_Activate
Mcu.Pin58=VP_SYS_VS_Systick
Mcu.Pin59=VP_TIM3_VS_ClockSourceINT
Mcu.Pin6=PA1
Mcu.Pin60=VP_TIM4_VS_ClockSourceINT
Mcu.Pin60=VP_TIM3_VS_no_output1
Mcu.Pin61=VP_TIM4_VS_ClockSourceINT
Mcu.Pin7=PA2
Mcu.Pin8=PA3
Mcu.Pin9=PA4
Mcu.PinsNb=61
Mcu.PinsNb=62
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F107VCTx
MxCube.Version=6.15.0
MxDb.Version=DB.6.0.150
NVIC.ADC1_2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.ADC1_2_IRQn=true\:7\:0\:true\:false\:true\:true\:true\:true
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.CAN1_RX0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.CAN2_RX1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.CAN1_RX0_IRQn=true\:3\:0\:true\:false\:true\:true\:true\:true
NVIC.CAN2_RX1_IRQn=true\:3\:0\:true\:false\:true\:true\:true\:true
NVIC.CAN2_TX_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.DMA1_Channel1_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
NVIC.DMA1_Channel1_IRQn=true\:1\:0\:true\:false\:true\:false\:true\:true
NVIC.DMA1_Channel2_IRQn=true\:4\:0\:true\:false\:true\:false\:true\:true
NVIC.DMA1_Channel3_IRQn=true\:1\:0\:true\:false\:true\:false\:true\:true
NVIC.DMA1_Channel6_IRQn=true\:1\:0\:true\:false\:true\:false\:true\:true
NVIC.DMA1_Channel7_IRQn=true\:4\:0\:true\:false\:true\:false\:true\:true
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
@@ -163,11 +208,11 @@ NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
NVIC.TIM3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.UART5_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.TIM3_IRQn=true\:6\:0\:true\:false\:true\:true\:true\:true
NVIC.UART5_IRQn=true\:5\:0\:true\:false\:true\:true\:true\:true
NVIC.USART1_IRQn=true\:5\:0\:true\:false\:true\:true\:true\:true
NVIC.USART2_IRQn=true\:2\:0\:true\:false\:true\:true\:true\:true
NVIC.USART3_IRQn=true\:2\:0\:true\:false\:true\:true\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
OSC_IN.Mode=HSE-External-Oscillator
OSC_IN.Signal=RCC_OSC_IN
@@ -262,6 +307,8 @@ PC10.Signal=USART3_TX
PC11.Locked=true
PC11.Mode=Asynchronous
PC11.Signal=USART3_RX
PC12.GPIOParameters=GPIO_Label
PC12.GPIO_Label=HEATER
PC12.Mode=Asynchronous
PC12.Signal=UART5_TX
PC14-OSC32_IN.Mode=LSE-External-Oscillator
@@ -285,6 +332,11 @@ PC5.GPIOParameters=GPIO_Label
PC5.GPIO_Label=LOCK_B
PC5.Locked=true
PC5.Signal=GPIO_Output
PC9.GPIOParameters=GPIO_Speed,GPIO_Label
PC9.GPIO_Label=LED_DATA
PC9.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
PC9.Locked=true
PC9.Signal=GPIO_Output
PD0.Locked=true
PD0.Mode=CAN_Activate
PD0.Signal=CAN1_RX
CHAT_SESSION_CHANGELOG.md
-133
View File
@@ -1,133 +0,0 @@
# Журнал изменений (сессия чата): `fork/CCSModuleSW30Web`
Документ фиксирует доработки проекта **CCSModuleSW30Web** в ветке/каталоге форка
`/Users/colorbass/STM32CubeIDE/workspace_1.12.0/fork/CCSModuleSW30Web`, обсуждавшиеся и вносившиеся в рамках описанной сессии (UART, ADC/DMA, CP, отладка IRQ, оптимизация `-Ofast` для кода из прерываний).
---
## 1. UART и протокол
### 1.1. UART3 (Everest / `serial.c`)
- Таймаут «нет связи с хостом»:** `EVEREST_TIMEOUT_MS` = **5000** мс.
- Жёсткий реинициал при отсутствии RX:** `UART3_REINIT_TIMEOUT_MS` = **1500** мс (с защитой от слишком частых реинициалов через `uart3_last_reinit_tick`).
- Расширено логирование путей сброса/ошибок приёма и ошибок HAL для диагностики «таймаут без остановки UART3».
- Колбэки и вспомогательные функции, вызываемые из контекста прерывания, помечены **`ISR_FAST`** (см. раздел 6):
`CCS_RxEventCallback`, `HAL_UART_ErrorCallback`, `uart3_log_hal_error`, `uart3_arm_rx_or_log`, цепочка разбора пакета (`process_received_packet`, `crc16_ibm`, `expected_payload_len`, `apply_command`).
### 1.2. UART2 / `serial_control.c`
- Отдельная логика **`SC_UART2_Watchdog()`**, вызывается из **`SC_Task()`** (не из IRQ).
- Константы:
- **`SC_UART2_REINIT_TIMEOUT_MS`** = **500** мс — порог для жёсткого реинициала при отсутствии пакетов;
- **`SC_UART2_PACKET_TIMEOUT_MS`** = **5000** мс — таймаут коммуникации.
- Сценарий **новый пакет при `BUSY_TX`**: при необходимости **`Abort_IT`**, сброс направления RS-485, затем повторная инициализация UART и приём `ReceiveToIdle_IT` (защита от обрыва TX из-за агрессивного watchdog).
- Отдельная ветка **жёсткого реинициала при `BUSY_TX`** с логом `USART2 BUSY_TX: hard reinit` (отслеживание `sc_uart2_last_busy_tx_reinit_packet_tick`).
- HAL-колбэки **`HAL_UARTEx_RxEventCallback`**, **`HAL_UART_TxCpltCallback`** помечены **`ISR_FAST`**.
### 1.3. `SC_SendPacket` и стек CRC/кодирования
- Для единообразной оптимизации пути «IRQ → ответ» на функции **`calculate_crc32`**, **`encode_packet`**, **`parse_packet`**, **`process_received_packet`** и публичную **`SC_SendPacket`** добавлен **`ISR_FAST`**.
- В **`Core/Inc/serial_control.h`**: подключение **`isr_opt.h`**, прототип **`ISR_FAST void SC_SendPacket(...)`** (согласованность с определением в `.c`).
**Замечание:** `SC_SendPacket` вызывается и из основного потока; для GCC вся функция компилируется с `-Ofast`. При необходимости строгого разделения можно вынести отдельную версию «только из IRQ».
---
## 2. Отладочные линии DBG в `stm32f1xx_it.c`
На время входа/выхода из выбранных обработчиков прерываний поднимается/опускается соответствующий GPIO — удобно для осциллографа (длительность IRQ).
| Линия | Обработчик |
|--------|------------|
| **DBG1** | `UART5_IRQHandler` |
| **DBG2** | `USART2_IRQHandler` |
| **DBG3** | `USART3_IRQHandler` |
| **DBG4** | `DMA1_Channel1_IRQHandler`, `ADC1_2_IRQHandler`, `TIM3_IRQHandler` |
| **DBG5** | `CAN1_RX0_IRQHandler`, `CAN2_TX_IRQHandler`, `CAN2_RX1_IRQHandler` |
| — | `USART1_IRQHandler` — без обёртки DBG (по согласованию) |
В **`DMA1_Channel1_IRQHandler`** вызывается **`HAL_DMA_IRQHandler(&hdma_adc1)`** для цепочки ADC+DMA.
Для всего файла **`stm32f1xx_it.c`** под GCC добавлено:
```c
#pragma GCC optimize("Ofast")
```
(в блоке `USER CODE BEGIN Includes`).
---
## 3. ADC: DMA, глобальные данные, колбэк
- Файлы **`adc.c` / `adc.h`**: структура **`ADC_ScanData_t`**, глобально **`volatile ADC_ScanData_t adc_data`** с полями сырых каналов (`in3_raw`, `cp_raw`, `ntc1_raw`, `ntc2_raw`, `temp_sensor_raw`, `vrefint_raw` и т.д. по фактическому объявлению в заголовке).
- **`HAL_ADC_ConvCpltCallback`**: копирование из буфера DMA в **`adc_data`**, помечен **`ISR_FAST`**.
- Публичная **`ADC_ScanStart()`** — запуск сканирования (после калибровки вызывается из инициализации платы).
- **`board.c`**: после **`HAL_ADCEx_Calibration_Start`** вызывается **`ADC_ScanStart()`**; **`CONN_ReadTemp`** читает **`adc_data.ntc1_raw` / `ntc2_raw`** вместо блокирующего опроса ADC.
**Диагностика (из обсуждения):** если не вызываются **`HAL_ADC_ConvCpltCallback`** / **`HAL_DMA_IRQHandler`**, проверять: срабатывание триггера ADC (например, **TIM3 TRGO**), работу TIM3, порядок инициализации DMA/NVIC, срабатывание **`DMA1_Channel1_IRQHandler`**.
---
## 4. CP (`cp.c` / `cp.h`)
- Измерение опоры на **`adc_data.cp_raw`** (и при необходимости **`vrefint_raw`** по текущей реализации в коде).
- Логика классификации/порогов приведена к варианту, согласованному с основным **CCSModuleSW30Web** (не форк).
- Сэмпл по таймеру: уход от тяжёлой работы в IRQ OC — использование **`HAL_TIM_OC_Start`** без прерывания по сравнению, обновление напряжения в **`CP_GetVoltage()`** / основном цикле (**`CP_Loop`** опирается на **`CP_GetState()`** и т.п. по фактическому коду).
---
## 5. Отладочный UART (`debug.c`)
При **`#ifndef USE_WEB_INTERFACE`** (или эквивалентной ветке сборки в файле): колбэк **`HAL_UARTEx_RxEventCallback`** и **`debug_rx_interrupt`** помечены **`ISR_FAST`**.
---
## 6. Оптимизация `-Ofast` для кода из прерываний
### 6.1. Макрос `ISR_FAST`
Файл **`Core/Inc/isr_opt.h`**:
- **GCC:** `#define ISR_FAST __attribute__((optimize("Ofast")))`
- **Иное:** пустой макрос.
### 6.2. Где используется (по состоянию репозитория)
| Файл | Элементы с `ISR_FAST` / pragma |
|------|--------------------------------|
| `stm32f1xx_it.c` | `#pragma GCC optimize("Ofast")` на весь файл (GCC) |
| `adc.c` | `HAL_ADC_ConvCpltCallback` |
| `serial.c` | `CCS_RxEventCallback`, `HAL_UART_ErrorCallback`, `uart3_log_hal_error`, `uart3_arm_rx_or_log`, `process_received_packet`, `crc16_ibm`, `expected_payload_len`, `apply_command` |
| `serial_control.c` | `HAL_UARTEx_RxEventCallback`, `HAL_UART_TxCpltCallback`, `calculate_crc32`, `encode_packet`, `parse_packet`, `process_received_packet`, `SC_SendPacket` |
| `serial_control.h` | прототип `SC_SendPacket` + `#include "isr_opt.h"` |
| `psu_control.c` | `HAL_CAN_RxFifo1MsgPendingCallback` |
| `debug.c` | см. раздел 5 |
---
## 7. Ограничения и переносимость
- **`ISR_FAST`** и pragma в **`stm32f1xx_it.c`** рассчитаны на **GCC** (STM32CubeIDE по умолчанию). Для **IAR / ARM Compiler 6** потребуется отдельная стратегия (прагмы/ключи проекта).
- **`-Ofast`** допускает агрессивные преобразования с плавающей точкой и перестановки, влияющие на строго воспроизводимую арифметику; для критичных вычислений вне IRQ при необходимости ограничивайте область оптимизации.
---
## 8. Затронутые пути (краткий список)
- `Core/Inc/isr_opt.h` — новый/центральный заголовок оптимизации IRQ.
- `Core/Inc/serial_control.h` — `isr_opt.h`, `ISR_FAST` у `SC_SendPacket`.
- `Core/Src/stm32f1xx_it.c` — DBG, DMA ADC, pragma `Ofast`.
- `Core/Src/adc.c`, `Core/Inc/adc.h` — DMA, `adc_data`, `ADC_ScanStart`, колбэк.
- `Core/Src/board.c` — калибровка, старт скана, температура из `adc_data`.
- `Core/Src/cp.c`, `Core/Inc/cp.h` — CP и ADC.
- `Core/Src/serial.c` — UART3, таймауты, логи, `ISR_FAST`.
- `Core/Src/serial_control.c` — UART2, watchdog, `ISR_FAST`.
- `Core/Src/psu_control.c` — CAN RX callback.
- `Core/Src/debug.c` — отладочный UART под условием сборки.
- `Core/Src/dma.c`, `gpio.c`, `main.h` — по необходимости для DMA1 Ch1 и DBG-пинов.
---
*Документ сгенерирован для фиксации контекста сессии; при дальнейших правках кода имеет смысл обновлять соответствующие разделы вручную.*
Core/.DS_Store
Vendored
BIN
View File
Binary file not shown.
Core/Inc/.DS_Store
Vendored
BIN
View File
Binary file not shown.
Core/Inc/adc.h
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file adc.h
* @brief This file contains all the function prototypes for
* the adc.c file
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __ADC_H__
Core/Inc/board.h
+5 -14
View File
@@ -1,14 +1,6 @@
/*
* board.h
*
* Created on: Apr 15, 2024
* Author: colorbass
*/
#pragma once
#ifndef SRC_BOARD_H_
#define SRC_BOARD_H_
void GBT_Lock(uint8_t state);
#include <stdint.h>
typedef enum{
RELAY_AUX0 = 0,
@@ -24,6 +16,7 @@ typedef enum{
} relay_t;
void RELAY_Write(relay_t num, uint8_t state);
uint8_t RELAY_Read(relay_t num);
void Init_Peripheral();
uint8_t GBT_LockGetState();
void GBT_Lock(uint8_t state);
@@ -55,10 +48,8 @@ typedef struct __attribute__((packed)) {
uint8_t stationType; // Байт 4: тип станции
uint8_t boardVersion; // Байт 5: версия платы
uint8_t addrEdcan; // Байт 6: адрес EDCAN
uint8_t reserved[57]; // Байты 7-63: зарезервированы
uint8_t maxPower; // Байт 7: максимальная мощность станции (5кВт/bit)
uint8_t reserved[56]; // Байты 8-63: зарезервированы
} InfoBlock_t;
extern InfoBlock_t *InfoBlock;
#endif /* SRC_BOARD_H_ */
Core/Inc/can.h
Executable → Regular
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file can.h
* @brief This file contains all the function prototypes for
* the can.c file
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __CAN_H__
Core/Inc/charger_config.h
+22 -3
View File
@@ -5,9 +5,28 @@
#define PSU_MIN_VOLTAGE 150 //1V/bit
#define PSU_MAX_CURRENT 133 //1A/bit
#define PSU_MIN_CURRENT 1 //1A/bit
#define PSU_MAX_POWER 30000 //1W/bit
#define PSU_MAX_POWER 40000 //1W/bit
#define PSU_NUM 1
#define GBT_CH_VER_MAJOR 1
#define GBT_CH_VER_MINOR 0
/* Dynamic LV clamp (CS60 hv_limit): active only on overload at low bus voltage. */
#define PSU_LV_CLAMP_V 499u
#define PSU_HV_LIMIT_ON_THRESHOLD 480u
#define PSU_HV_LIMIT_OFF_THRESHOLD 495u
#define PSU_HV_SWITCH_DELAY_MS 1000u
#define PSU_HV_LOAD_CURRENT 300u /* 30.0 A, MeasuredCurrent is 0.1 A/bit */
#define PSU_HV_LIMIT_MAX_COUNT 3u
/* Fast discharge: PSU off/on cycle on step-down setpoint (unloaded bus). */
#define PSD_ENABLE 1u
#define PSD_MAX_CMD_CURRENT_0P1A 20u /* 2.0 A */
#define PSD_MAX_MEASURED_CURRENT_0P1A 30u /* 3.0 A */
#define PSD_MEASURED_LATCH_MS 500u
#define PSD_MIN_VOLTAGE_STEP_V 50u
#define PSD_DISCHARGE_MARGIN_V 15u
#define PSD_DEBOUNCE_MS 2000u
#define PSD_MAX_PER_SESSION 4u
#define PSD_OFF_TIMEOUT_MS 10000u /* как PSU_WAIT_ACK_OFF */
#define PSD_ON_TIMEOUT_MS 10000u
#define PSD_ON_RETRY_MS 500u /* повтор SET+ON в ON_WAIT */
#define PSD_PRECHARGE_TOLERANCE_V 40u /* ~±10% for 350 V precharge window */
Core/Inc/charger_control.h
+7 -19
View File
@@ -1,12 +1,4 @@
/*
* charger_control.h
*
* Created on: Jul 29, 2024
* Author: colorbass
*/
#ifndef INC_CHARGER_CONTROL_H_
#define INC_CHARGER_CONTROL_H_
#pragma once
#include "main.h"
@@ -55,6 +47,7 @@ typedef enum __attribute__((packed)){
CONN_ERR_HOTPLUG = 8, // Коннектор неожиданно отключился
CONN_ERR_EV_COMM = 9, // Ошибка протокола связи с электромобилем
CONN_ERR_PSU_FAULT = 10, // Ошибка PSU
CONN_ERR_FIRE_ALARM = 11, // Пожарная тревога (до перезагрузки)
}CONN_Error_t;
@@ -75,6 +68,10 @@ typedef struct{
uint16_t WantedCurrent; //0.1A/bit
CONN_Error_t chargingError; // 0 if okay
uint8_t EvConnected;
uint32_t ChargingTime; // seconds of active charging in current session
uint8_t hv_limit; // Limits PSU voltage to LV range when set
uint32_t hv_tick; // Timer for delayed HV limit switching
uint8_t hv_limit_count; // Anti-chatter counter for LV limit switching
} ChargingConnector_t;
@@ -83,16 +80,7 @@ typedef struct{
extern ChargingConnector_t CONN;
//информация о зарядке
//база данных с хранением инфы
//главный блок хранит в себе инфу о конфиге возможно во флеше
//либо в charger_config.h
//OCPP - универсальный блок типа
void CONN_Init();
void CONN_Loop();
void CONN_PrintChargingTotal();
#endif /* INC_CHARGER_CONTROL_H_ */
void CONN_GetElapsedForMonitoring(uint16_t *min, uint8_t *sec);
Core/Inc/connector.h
+1 -12
View File
@@ -1,12 +1,4 @@
/*
* connector.h
*
* Created on: Jul 31, 2024
* Author: colorbass
*/
#ifndef INC_CONNECTOR_H_
#define INC_CONNECTOR_H_
#pragma once
#include "main.h"
#include "charger_control.h"
@@ -15,7 +7,4 @@
extern CONN_State_t connectorState;
void CONN_Init();
void CONN_Task();
void CONN_SetState(CONN_State_t state);
#endif /* INC_CONNECTOR_H_ */
Core/Inc/cp.h
+5 -4
View File
@@ -1,5 +1,4 @@
#ifndef __CP_H
#define __CP_H
#pragma once
#include "main.h"
#include <stdint.h>
@@ -16,12 +15,14 @@ typedef enum {
EV_STATE_ACQUIRING = 6,
} CP_State_t;
extern CP_State_t cp_state_buffer;
void CP_Init(void);
void CP_SetDuty(uint8_t percentage);
uint8_t CP_GetDuty(void);
int32_t CP_GetVoltage(void);
CP_State_t CP_GetState(void);
CP_State_t CP_GetFilteredState(void);
void CP_FilterState(void);
void CP_Loop(void);
#endif
Core/Inc/crc.h
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file crc.h
* @brief This file contains all the function prototypes for
* the crc.c file
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __CRC_H__
Core/Inc/debug.h
+1 -11
View File
@@ -1,12 +1,4 @@
/*
* debug.h
*
* Created on: Apr 16, 2024
* Author: colorbass
*/
#ifndef SRC_DEBUG_H_
#define SRC_DEBUG_H_
#pragma once
#include <stdint.h>
#include <stdarg.h>
@@ -30,5 +22,3 @@ void debug_buffer_send(void);
// Кастомный printf с приоритетом лога
int log_printf(LogLevel_t level, const char *format, ...);
#endif /* SRC_DEBUG_H_ */
Core/Inc/dma.h
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file dma.h
* @brief This file contains all the function prototypes for
* the dma.c file
******************************************************************************
* @attention
*
* Copyright (c) 2026 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __DMA_H__
Core/Inc/fire_alarm.h
+9
View File
@@ -0,0 +1,9 @@
#ifndef INC_FIRE_ALARM_H_
#define INC_FIRE_ALARM_H_
#include <stdint.h>
uint8_t FireAlarm_IsLatched(void);
void FireAlarm_Activate(void);
#endif /* INC_FIRE_ALARM_H_ */
Core/Inc/gpio.h
Executable → Regular
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file gpio.h
* @brief This file contains all the function prototypes for
* the gpio.c file
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __GPIO_H__
Core/Inc/isr_opt.h
+1 -4
View File
@@ -1,5 +1,4 @@
#ifndef ISR_OPT_H
#define ISR_OPT_H
#pragma once
/* GCC: быстрые функции, вызываемые из IRQ / из HAL из IRQ-контекста */
#if defined(__GNUC__)
@@ -7,5 +6,3 @@
#else
#define ISR_FAST
#endif
#endif /* ISR_OPT_H */
Core/Inc/main.h
+8 -18
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
@@ -43,7 +27,7 @@ extern "C" {
/* USER CODE BEGIN EC */
#define FW_VERSION_MAJOR 1
#define FW_VERSION_MINOR 0
#define FW_VERSION_PATCH 15
#define FW_VERSION_PATCH 31
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
@@ -55,6 +39,8 @@ extern "C" {
void Error_Handler(void);
/* USER CODE BEGIN EFP */
uint8_t ED_TraceWarning(uint8_t flag, uint8_t id);
void ED_Delay(uint32_t Delay);
/* USER CODE END EFP */
@@ -101,8 +87,12 @@ void Error_Handler(void);
#define DBG5_GPIO_Port GPIOB
#define DBG4_Pin GPIO_PIN_11
#define DBG4_GPIO_Port GPIOB
#define LED_DATA_Pin GPIO_PIN_9
#define LED_DATA_GPIO_Port GPIOC
#define RELAY_CC_Pin GPIO_PIN_15
#define RELAY_CC_GPIO_Port GPIOA
#define HEATER_Pin GPIO_PIN_12
#define HEATER_GPIO_Port GPIOC
#define RELAY_DC_Pin GPIO_PIN_3
#define RELAY_DC_GPIO_Port GPIOD
#define USART2_DIR_Pin GPIO_PIN_4
Core/Inc/meter.h
+1 -13
View File
@@ -1,25 +1,15 @@
/*
* psu_struct.h
*
* Created on: Jul 24, 2024
* Author: colorbass
*/
#ifndef INC_METER_H_
#define INC_METER_H_
#pragma once
#include "main.h"
#include "charger_config.h"
typedef struct {
uint32_t meterLastTick; // Время последнего пакета Alive
uint8_t online;
uint32_t lastTick; // Время последнего вызова для каждого коннектора
uint64_t EnergyPSU_Ws; // Энергия для каждого коннектора (расчет по силовым модулям)
uint32_t AbsoluteEnergy; // Абсолютная энергия каждого счетчика (ватт*час)
uint32_t EnergyOffset; // смещение энергии по счетчикам (если 0, значит не успели захватить Offset) (ватт*час)
uint32_t EnergyOffset1; // смещение энергии по счетчикам относительно PSU
uint8_t enable; //если 0, то счетчик обнуляется
}METER_t;
@@ -27,5 +17,3 @@ typedef struct {
extern METER_t METER;
void METER_CalculateEnergy();
#endif /* INC_METER_H_ */
Core/Inc/power_setpoint_executor.h
+21
View File
@@ -0,0 +1,21 @@
#pragma once
#include <stdint.h>
#include "power_setpoint_policy.h"
typedef enum {
PSD_TRY_IDLE = 0,
PSD_TRY_APPLIED_NORMAL,
PSD_TRY_START_FAST_DISCHARGE,
} PowerSetpointTryResult_t;
void PowerSetpoint_Init(void);
void PowerSetpoint_OnCommand(uint16_t voltage_V, uint16_t current_0p1A);
void PowerSetpoint_UpdateDeliveryLatch(void);
uint8_t PowerSetpoint_HasPending(void);
uint8_t PowerSetpoint_IsBusy(void);
PowerSetpointTryResult_t PowerSetpoint_TryApply(void);
void PowerSetpoint_GetFastDischargeTarget(PowerSetpoint_t *target);
void PowerSetpoint_OnFastDischargeComplete(void);
void PowerSetpoint_OnFastDischargeAbort(void);
Core/Inc/power_setpoint_policy.h
+35
View File
@@ -0,0 +1,35 @@
#pragma once
#include <stdint.h>
#include "charger_config.h"
typedef struct {
uint16_t voltage_V;
uint16_t current_0p1A;
} PowerSetpoint_t;
typedef enum {
POWER_SETPOINT_NORMAL,
POWER_SETPOINT_FAST_DISCHARGE,
} PowerSetpointAction_t;
typedef struct {
uint8_t dc_contactor_closed;
uint8_t psu_hv_enabled;
uint16_t measured_voltage_V;
uint16_t measured_current_0p1A;
uint8_t power_delivery_active;
uint8_t enable_output;
uint8_t psu_state_connected;
uint8_t psu_cont_fault;
uint8_t psu_fault;
uint8_t fast_discharge_count;
uint32_t last_fast_discharge_ms;
uint32_t now_ms;
} PowerPathContext_t;
PowerSetpointAction_t PowerSetpoint_Decide(
const PowerSetpoint_t *applied,
const PowerSetpoint_t *next,
const PowerPathContext_t *ctx);
Core/Inc/psu_control.h
+8 -16
View File
@@ -1,20 +1,12 @@
/*
* ccs_control.h
*
* Created on: 19 авг. 2024 г.
* Author: colorbass
*/
#ifndef INC_PSU_CONTROL_H_
#define INC_PSU_CONTROL_H_
#pragma once
#include "main.h"
#include "charger_config.h"
void PSU_Init();
void PSU_Enable(uint8_t addr, uint8_t enable);
void PSU_Loop();
void CONT_Loop();
void PSU_SetVoltageCurrent(uint8_t addr, uint16_t voltage, uint16_t current);
void PSU_ReadWrite(void);
// --- Состояние силового модуля (DC30, один PSU) ---
@@ -25,6 +17,11 @@ typedef enum{
PSU_WAIT_ACK_ON, // ждём подтверждение включения модуля (напряжение выше порога)
PSU_CONT_WAIT_ACK_ON, // включаем DC-контактор и ждём подтверждение
PSU_CONNECTED, // модуль включён, DC-контактор замкнут
PSU_FAST_DISCHARGE_OFF,
PSU_FAST_DISCHARGE_WAIT, /* ждём подтверждение выключения (как PSU_WAIT_ACK_OFF) */
PSU_FAST_DISCHARGE_SET, /* задать целевое U/I при выключенном модуле */
PSU_FAST_DISCHARGE_ON, /* команда включения после set */
PSU_FAST_DISCHARGE_ON_WAIT, /* ждём подтверждение включения (как PSU_WAIT_ACK_ON) */
PSU_CURRENT_DROP, // снижение тока перед отключением
PSU_WAIT_ACK_OFF, // ждём подтверждение выключения модуля (напряжение ниже порога)
PSU_CONT_WAIT_ACK_OFF, // выключаем DC-контактор и ждём подтверждение
@@ -87,7 +84,6 @@ typedef struct {
// Дополнительные параметры для одного модуля DC30
uint32_t power_limit; // лимит мощности [кВт]
uint8_t hv_mode; // HV-режим (ограничение напряжения)
uint32_t tempAmbient; // температура окружающего воздуха (из PSU_04)
union { uint8_t raw; PSU_Status0_t bits; } status0; // modularForm0
@@ -190,7 +186,3 @@ extern PSU_1B_t PSU_1B;
extern PSU_1C_t PSU_1C;
#pragma pack(pop)
#endif /* INC_PSU_CONTROL_H_ */
Core/Inc/rgb_controller.h
+6 -12
View File
@@ -1,14 +1,7 @@
/*
* rgb_handler.h
*
* Created on: Jul 25, 2024
* Author: colorbass
*/
#ifndef INC_RGB_CONTROLLER_H_
#define INC_RGB_CONTROLLER_H_
#pragma once
#include "main.h"
#include "serial_control.h"
#pragma pack(push, 1)
@@ -48,6 +41,7 @@ typedef struct{
void LED_Task();
void LED_Write();
void LED_Init();
#endif /* INC_RGB_CONTROLLER_H_ */
void LED_SetColor(const RGB_Cycle_t *color);
void RGB_SetColor(RGB_t *color);
void WS2812_SetColor(RGB_t *color);
uint8_t LED_ApplyLightingConfig(const LightingConfigPacket_t *config);
Core/Inc/rtc.h
Executable → Regular
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file rtc.h
* @brief This file contains all the function prototypes for
* the rtc.c file
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __RTC_H__
Core/Inc/serial.h
+8 -10
View File
@@ -1,5 +1,4 @@
#ifndef __SERIAL_H
#define __SERIAL_H
#pragma once
#include "main.h"
#include "charger_control.h"
@@ -11,14 +10,16 @@ void CCS_Init(void);
void CCS_SendEmergencyStop(void);
void CCS_SendStart(void);
void CCS_RxEventCallback(UART_HandleTypeDef *huart, uint16_t size);
void CCS_TxCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
typedef enum {
CCS_DISABLED = 0,
CCS_UNPLUGGED = 1,
CCS_AUTH_REQUIRED = 2,
CCS_CONNECTED = 3,
CCS_REPLUGGING = 4,
CCS_UNKNOWN = 0,
CCS_DISABLED = 1,
CCS_UNPLUGGED = 2,
CCS_AUTH_REQUIRED = 3,
CCS_CONNECTED = 4,
CCS_REPLUGGING = 5,
} CCS_ConnectorState_t;
typedef enum {
@@ -123,6 +124,3 @@ extern CCS_MaxLoad_t CCS_MaxLoad;
extern CCS_EvInfo_t CCS_EvInfo;
extern CONN_State_t CCS_EvseState;
extern uint8_t REPLUG;
#endif
Core/Inc/serial_control.h
+26 -6
View File
@@ -1,13 +1,10 @@
#ifndef SERIALCONTROL_H
#define SERIALCONTROL_H
#pragma once
#include "main.h"
#include <string.h>
#include "charger_control.h"
#include "isr_opt.h"
#define USE_WEB_INTERFACE
// Команды от ПК к устройству
// Пакет статуса изоляции от отдельного блока по одностороннему UART
#define CMD_ISOLATION_STATUS 0x01
@@ -25,9 +22,12 @@
// Сервисные команды
#define CMD_SET_CONFIG 0xB0
#define CMD_SET_LIGHTING 0xB1
// Перезагрузка для входа в бутлоадер
#define CMD_DEVICE_RESET 0xB5
// Пожарная тревога (внешний триггер)
#define CMD_FIRE_ALARM 0xB7
// Коды ответов
#define RESP_SUCCESS 0x12
@@ -148,6 +148,27 @@ typedef struct __attribute__((packed)) {
} ConfigBlock_t;
typedef struct __attribute__((packed)) {
uint8_t r;
uint8_t g;
uint8_t b;
uint8_t brightness;
uint8_t effect;
uint8_t speed;
uint8_t fadeTo;
} LightingRolePacket_t;
typedef struct __attribute__((packed)) {
uint8_t mode;
uint8_t flags;
uint8_t previewSec;
uint8_t reserved;
LightingRolePacket_t roles[5];
} LightingConfigPacket_t;
_Static_assert(sizeof(LightingRolePacket_t) == 7, "Lighting role packet must be 7 bytes");
_Static_assert(sizeof(LightingConfigPacket_t) == 39, "Lighting config packet must be 39 bytes");
// Предварительное объявление структуры протокола
typedef struct SerialControl_t SerialControl_t;
@@ -170,6 +191,7 @@ struct SerialControl_t {
void SC_Init();
void SC_Task();
ISR_FAST void SC_SendPacket(const uint8_t* payload, uint16_t payload_len, uint8_t response_code);
void SC_RecoverUartDma(UART_HandleTypeDef *huart);
// Внешняя функция обработки команд (определена в serial_handler.c)
extern void SC_CommandHandler(ReceivedCommand_t* cmd);
@@ -179,5 +201,3 @@ extern StatusPacket_t statusPacket;
extern InfoPacket_t infoPacket;
extern IsolationStatusPacket_t ISO;
extern volatile SC_Source_t g_sc_command_source;
#endif // SERIALCONTROL_H
Core/Inc/sma_filter.h
+1 -5
View File
@@ -1,5 +1,4 @@
#ifndef SMA_FILTER_H
#define SMA_FILTER_H
#pragma once
#include <stdint.h>
@@ -18,6 +17,3 @@ typedef struct {
void SMAFilter_Init(SMAFilter_t* f);
int32_t SMAFilter_Update(SMAFilter_t* f, int32_t x);
#endif // SMA_FILTER_H
Core/Inc/soft_rtc.h
+1 -11
View File
@@ -1,12 +1,4 @@
/*
* soft_rtc.h
*
* Created on: Jul 22, 2024
* Author: colorbass
*/
#ifndef INC_SOFT_RTC_H_
#define INC_SOFT_RTC_H_
#pragma once
#include "main.h"
@@ -15,5 +7,3 @@ void set_Time(uint32_t unix_time);
void unix_to_bcd(uint32_t unix_time, uint8_t *time);
void writeTimeReg(uint8_t reg_number, uint8_t value);
uint8_t getTimeReg(uint8_t reg_number);
#endif /* INC_SOFT_RTC_H_ */
Core/Inc/stm32f1xx_hal_conf.h
+1 -16
View File
@@ -1,20 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f1xx_hal_conf.h
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
Core/Inc/stm32f1xx_it.h
+5 -16
View File
@@ -1,20 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f1xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
@@ -56,6 +41,10 @@ void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
void DMA1_Channel1_IRQHandler(void);
void DMA1_Channel2_IRQHandler(void);
void DMA1_Channel3_IRQHandler(void);
void DMA1_Channel6_IRQHandler(void);
void DMA1_Channel7_IRQHandler(void);
void ADC1_2_IRQHandler(void);
void CAN1_RX0_IRQHandler(void);
void TIM3_IRQHandler(void);
Core/Inc/tim.h
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file tim.h
* @brief This file contains all the function prototypes for
* the tim.c file
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __TIM_H__
Core/Inc/usart.h
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file usart.h
* @brief This file contains all the function prototypes for
* the usart.c file
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USART_H__
Core/Src/.DS_Store
Vendored
BIN
View File
Binary file not shown.
Core/Src/adc.c
+3 -19
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file adc.c
* @brief This file provides code for the configuration
* of the ADC instances.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "adc.h"
@@ -180,7 +164,7 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
hdma_adc1.Init.Mode = DMA_CIRCULAR;
hdma_adc1.Init.Priority = DMA_PRIORITY_HIGH;
hdma_adc1.Init.Priority = DMA_PRIORITY_MEDIUM;
if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
{
Error_Handler();
@@ -189,7 +173,7 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
__HAL_LINKDMA(adcHandle,DMA_Handle,hdma_adc1);
/* ADC1 interrupt Init */
HAL_NVIC_SetPriority(ADC1_2_IRQn, 0, 0);
HAL_NVIC_SetPriority(ADC1_2_IRQn, 7, 0);
HAL_NVIC_EnableIRQ(ADC1_2_IRQn);
/* USER CODE BEGIN ADC1_MspInit 1 */
Core/Src/board.c
+27 -20
View File
@@ -1,13 +1,9 @@
#include "main.h"
#include "board.h"
#include "adc.h"
#include "tim.h"
#include "sma_filter.h"
//TODO:
//TEMP READ
// Connector temperature sensors
#include "adc.h"
#include "main.h"
#include "sma_filter.h"
#include "tim.h"
InfoBlock_t *InfoBlock = (InfoBlock_t *)(VERSION_OFFSET);
@@ -74,19 +70,31 @@ uint8_t IN_ReadInput(inputNum_t input_n){
}
}
uint8_t GetBoardTemp(){
//TODO
// HAL_ADC_Start(&hadc1); // start the adc
//
// HAL_ADC_PollForConversion(&hadc1, 100); // poll for conversion
//
// adc_val = HAL_ADC_GetValue(&hadc1); // get the adc value
//
// HAL_ADC_Stop(&hadc1); // stop adc
/* Заглушка: температура платы не измеряется (нет реализации АЦП для канала). */
uint8_t GetBoardTemp(void){
return 0;
}
/**
* @brief Force PC12 (HEATER) as GPIO output via CRH/ODR, overriding UART5 MspInit.
* CubeMX assigns PC12 to UART5_TX; on the board it drives the heater relay.
*/
static void Heater_PinForceOutput(void)
{
const uint32_t pin_cfg = GPIO_SPEED_FREQ_LOW; /* MODE=10, CNF=00: GP output PP, 2 MHz */
__HAL_RCC_GPIOC_CLK_ENABLE();
MODIFY_REG(HEATER_GPIO_Port->CRH,
(GPIO_CRH_MODE12 | GPIO_CRH_CNF12),
(pin_cfg << GPIO_CRH_MODE12_Pos));
HEATER_GPIO_Port->BSRR = (uint32_t)HEATER_Pin << 16U;
}
void Init_Peripheral(){
Heater_PinForceOutput();
HAL_GPIO_WritePin(HEATER_GPIO_Port, HEATER_Pin, GPIO_PIN_RESET);
HAL_ADCEx_Calibration_Start(&hadc1);
ADC_ScanStart();
@@ -95,8 +103,8 @@ void Init_Peripheral(){
RELAY_Write(RELAY3, 0);
RELAY_Write(RELAY_DC, 0);
RELAY_Write(RELAY_AC, 0);
RELAY_Write(RELAY_CP, 1);
RELAY_Write(RELAY_CC, 1);
RELAY_Write(RELAY_CP, 0);
RELAY_Write(RELAY_CC, 0);
RELAY_Write(RELAY_DC1, 0);
SMAFilter_Init(&conn_temp_adc_filter[0]);
@@ -138,7 +146,6 @@ int16_t CONN_ReadTemp(uint8_t ch){
return 20; //Термодатчик не подключен
}
// int adc_value = 2048; // Пример значения АЦП
float Vref = 3.3; // Напряжение опорное
float Vin = 5.0; // Входное напряжение
float R = 1000; // Сопротивление резистора в Омах
Core/Src/can.c
+3 -19
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file can.c
* @brief This file provides code for the configuration
* of the CAN instances.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "can.h"
@@ -127,7 +111,7 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
__HAL_AFIO_REMAP_CAN1_3();
/* CAN1 interrupt Init */
HAL_NVIC_SetPriority(CAN1_RX0_IRQn, 0, 0);
HAL_NVIC_SetPriority(CAN1_RX0_IRQn, 3, 0);
HAL_NVIC_EnableIRQ(CAN1_RX0_IRQn);
/* USER CODE BEGIN CAN1_MspInit 1 */
@@ -165,7 +149,7 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
/* CAN2 interrupt Init */
HAL_NVIC_SetPriority(CAN2_TX_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(CAN2_TX_IRQn);
HAL_NVIC_SetPriority(CAN2_RX1_IRQn, 0, 0);
HAL_NVIC_SetPriority(CAN2_RX1_IRQn, 3, 0);
HAL_NVIC_EnableIRQ(CAN2_RX1_IRQn);
/* USER CODE BEGIN CAN2_MspInit 1 */
Core/Src/charger_control.c
+31 -30
View File
@@ -1,57 +1,65 @@
#include "charger_control.h"
#include "charger_config.h"
#include "psu_control.h"
#include "connector.h"
#include "debug.h"
#include "fire_alarm.h"
#include "psu_control.h"
ChargingConnector_t CONN;
CONN_State_t connectorState;
extern uint8_t config_initialized;
void CONN_Init(){
CONN.connControl = CMD_NONE;
CONN.connState = Unknown;
CONN.RequestedVoltage = PSU_MIN_VOLTAGE;
CONN.ChargingTime = 0;
CONN.hv_limit = 0u;
CONN.hv_tick = 0u;
CONN.hv_limit_count = 0u;
}
void CONN_Loop(){
static uint32_t charging_time_tick = 0;
static CONN_State_t last_connState = Unknown;
if(last_connState != CONN.connState){
last_connState = CONN.connState;
CONN.connControl = CMD_NONE;
}
if(PSU0.cont_fault){
if (FireAlarm_IsLatched()) {
CONN.chargingError = CONN_ERR_FIRE_ALARM;
} else if(PSU0.cont_fault){
CONN.chargingError = CONN_ERR_CONTACTOR;
} else if(PSU0.psu_fault){
CONN.chargingError = CONN_ERR_PSU_FAULT;
// } else if(!CTRL.ac_ok) {
// CONN.chargingError = CONN_ERR_AC_FAULT;
// } else
}else if (CONN.EvConnected == 0){
CONN.chargingError = CONN_NO_ERROR;
}
if(ED_TraceWarning(CONN.chargingError, 0)) printf("CONN%d Error: %d\n", 0, CONN.chargingError);
}
void CONN_Task(){
/* CCS state machine is handled in serial.c.
* Keep this task lightweight for scheduler compatibility.
*/
if (CONN.chargingError != CONN_NO_ERROR) {
CONN_SetState(Disabled);
return;
if(ED_TraceWarning(CONN.chargingError, 0)) {
log_printf(LOG_WARN, "CONN0 Error: %d\n", (int)CONN.chargingError);
}
if (connectorState == Unknown && config_initialized) {
CONN_SetState(Unplugged);
} else if (connectorState == Disabled && CONN.chargingError == CONN_NO_ERROR) {
CONN_SetState(Unplugged);
if (HAL_GetTick() - charging_time_tick >= 1000U) {
charging_time_tick += 1000U;
if (CONN.connState == Charging) {
CONN.ChargingTime++;
}
if (CONN.connState == Unplugged) {
CONN.ChargingTime = 0;
}
}
}
void CONN_GetElapsedForMonitoring(uint16_t *min, uint8_t *sec) {
uint32_t elapsed_sec = CONN.ChargingTime;
if (min != NULL) {
*min = (uint16_t)(elapsed_sec / 60U);
}
if (sec != NULL) {
*sec = (uint8_t)(elapsed_sec % 60U);
}
}
@@ -80,10 +88,3 @@ void CONN_SetState(CONN_State_t state){
CONN.connState = state;
}
void CONN_PrintChargingTotal(){
printf("CONN%d Charging Finished:\n", 0);
// printf("Charging Time: %d\n", CONN.chargingTime);
printf("Charging Energy: %d\n", CONN.Energy);
// printf("Charging Power: %d\n", CONN.chargingPower);
}
Core/Src/cp.c
+64 -1
View File
@@ -1,15 +1,19 @@
#include "cp.h"
#include "adc.h"
#include "board.h"
#include "debug.h"
#include "tim.h"
#include <stdint.h>
#include <stdlib.h>
#define MAX_DUTY 450
#define FILTER_ORDER 100
static int32_t cp_voltage_mv = 0;
static uint8_t cp_duty = 0;
CP_State_t fake_cp_state = EV_STATE_ACQUIRING;
CP_State_t cp_state_buffer = EV_STATE_ACQUIRING;
#define VREFINT_CAL_ADDR ((uint16_t*)0x1FFFF7BA) // для STM32F1!
@@ -93,7 +97,66 @@ CP_State_t CP_GetState(void) {
}
}
CP_State_t CP_GetFilteredState(void) {
return cp_state_buffer;
}
void CP_FilterState(void) {
static CP_State_t pending_state = EV_STATE_ACQUIRING;
static uint8_t stable_count = 0u;
CP_State_t current_state = CP_GetState();
/* Keep last accepted state while CP is still acquiring. */
if (current_state == EV_STATE_ACQUIRING) {
pending_state = EV_STATE_ACQUIRING;
stable_count = 0u;
return;
}
if (current_state != pending_state) {
pending_state = current_state;
stable_count = 1u;
return;
}
if (stable_count < FILTER_ORDER) {
stable_count++;
}
if (stable_count >= FILTER_ORDER) {
cp_state_buffer = pending_state;
}
}
void CP_Loop(void) {
(void)CP_GetState();
static uint32_t tick;
if ((int32_t)(HAL_GetTick() - tick) < 1) return;
tick = HAL_GetTick();
static uint8_t initialized = 0;
static CP_State_t prev_state = EV_STATE_ACQUIRING;
static uint8_t prev_duty = 0;
CP_FilterState();
CP_State_t current_state = CP_GetFilteredState();
uint8_t current_duty = cp_duty;
if (!initialized) {
prev_state = current_state;
prev_duty = current_duty;
initialized = 1;
return;
}
if (current_state != prev_state) {
log_printf(LOG_INFO, "CP state changed: %d -> %d\n", prev_state, current_state);
prev_state = current_state;
}
if (current_duty != prev_duty) {
log_printf(LOG_INFO, "CP duty changed: %u -> %u\n", prev_duty, current_duty);
prev_duty = current_duty;
}
}
Core/Src/crc.c
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file crc.c
* @brief This file provides code for the configuration
* of the CRC instances.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "crc.h"
Core/Src/debug.c
+8 -232
View File
@@ -1,21 +1,14 @@
/*
* debug.c
*
* Created on: Apr 16, 2024
* Author: colorbass
*/
#include "main.h"
#include "board.h"
#include "connector.h"
#include "debug.h"
#include "serial_control.h"
#include "usart.h"
#include <stdarg.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <stdint.h>
#include <stdarg.h>
#include "debug.h"
#include "board.h"
#include "usart.h"
#include <time.h>
#include <connector.h>
#include "serial_control.h"
// Кольцевой буфер для отладочных сообщений
#define DEBUG_BUFFER_SIZE 1024
@@ -112,7 +105,7 @@ void debug_buffer_send(void)
__enable_irq();
}
#define LOG_BUFFER_SIZE 128
#define LOG_BUFFER_SIZE 256
uint8_t log_buffer[LOG_BUFFER_SIZE];
// Кастомный printf с приоритетом лога
@@ -148,220 +141,3 @@ int log_printf(LogLevel_t level, const char *format, ...)
return result;
}
#ifndef USE_WEB_INTERFACE
#include "isr_opt.h"
extern UART_HandleTypeDef huart2;
uint8_t debug_rx_buffer[256];
uint8_t debug_cmd_received;
uint8_t debug_rx_buffer_size = 0;
ISR_FAST void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size){
// if(huart->Instance == USART1){
// mm_rx_interrupt(huart, Size);
// }
if(huart->Instance == USART2){
debug_rx_interrupt(huart, Size);
}
}
ISR_FAST void debug_rx_interrupt(UART_HandleTypeDef *huart, uint16_t Size){
debug_rx_buffer[Size] = '\0';
debug_rx_buffer_size = Size;
debug_cmd_received = 1;
}
void debug_init(){
HAL_UARTEx_ReceiveToIdle_IT(&huart2,debug_rx_buffer,255);
}
void parse_command(uint8_t* buffer, size_t length) {
// ignore \r \n symbols
size_t i = 0;
for (i = 0; i < length; i++) {
if (buffer[i] == '\r' || buffer[i] == '\n') {
buffer[i] = '\0';
length = i;
break;
}
}
if (buffer[0] == 0) return;
if (strncmp((const char*)buffer, "reset", length) == 0) {
log_printf(LOG_INFO, "Resetting...\n");
NVIC_SystemReset();
} else if (strncmp((const char*)buffer, "relayaux", length) == 0) {
log_printf(LOG_INFO, "Relaying...\n");
RELAY_Write(RELAY_AUX, 1);
HAL_Delay(2000);
RELAY_Write(RELAY_AUX, 0);
} else if (strncmp((const char*)buffer, "relaycc", length) == 0) {
log_printf(LOG_INFO, "Relaying...\n");
RELAY_Write(RELAY_CC, 1);
HAL_Delay(200);
RELAY_Write(RELAY_CC, 0);
} else if (strncmp((const char*)buffer, "relaydc", length) == 0) {
log_printf(LOG_INFO, "Relaying...\n");
RELAY_Write(RELAY_DC, 1);
HAL_Delay(200);
RELAY_Write(RELAY_DC, 0);
} else if (strncmp((const char*)buffer, "relayac", length) == 0) {
log_printf(LOG_INFO, "Relaying...\n");
RELAY_Write(RELAY_AC, 1);
HAL_Delay(200);
RELAY_Write(RELAY_AC, 0);
} else if (strncmp((const char*)buffer, "adc", length) == 0) {
log_printf(LOG_INFO, "CC1=%.2f\n", CONN_CC_GetAdc());
} else if (strncmp((const char*)buffer, "lock_state", length) == 0) {
log_printf(LOG_INFO, "Lock state=%d\n", GBT_LockGetState());
} else if (strncmp((const char*)buffer, "lock_lock", length) == 0) {
log_printf(LOG_INFO, "Locked\n");
GBT_Lock(1);
} else if (strncmp((const char*)buffer, "lock_unlock", length) == 0) {
log_printf(LOG_INFO, "Unlocked\n");
GBT_Lock(0);
} else if (strncmp((const char*)buffer, "complete", length) == 0) {
CONN_SetState(Finished);
} else if (strncmp((const char*)buffer, "start", length) == 0) {
log_printf(LOG_INFO, "Started\n");
GBT_Start();
} else if (strncmp((const char*)buffer, "stop", length) == 0) {
log_printf(LOG_INFO, "Stopped\n");
GBT_StopEVSE(GBT_CST_SUSPENDS_ARTIFICIALLY);
} else if (strncmp((const char*)buffer, "stop1", length) == 0) {
log_printf(LOG_INFO, "Stopped\n");
GBT_ForceStop();
// } else if (strncmp((const char*)buffer, "force", length) == 0) {
// log_printf(LOG_INFO, "Stopped\n");
// GBT_Lock(1);
// GBT_SwitchState(GBT_S2_LOCKED);
// GBT_Delay(500);
} else if (strncmp((const char*)buffer, "cc_state", length) == 0) {
switch(CONN_CC_GetState()){
case GBT_CC_UNKNOWN:
log_printf(LOG_INFO, "GBT_CC_UNKNOWN\n");
break;
case GBT_CC_12V:
log_printf(LOG_INFO, "GBT_CC_12V\n");
break;
case GBT_CC_6V:
log_printf(LOG_INFO, "GBT_CC_6V\n");
break;
case GBT_CC_4V:
log_printf(LOG_INFO, "GBT_CC_4V\n");
break;
case GBT_CC_2V:
log_printf(LOG_INFO, "GBT_CC_2V\n");
break;
}
} else if (strncmp((const char*)buffer, "temp", length) == 0) {
log_printf(LOG_INFO, "temp1 %d\n",GBT_ReadTemp(0));
log_printf(LOG_INFO, "temp2 %d\n",GBT_ReadTemp(1));
} else if (strncmp((const char*)buffer, "info1", length) == 0) {
log_printf(LOG_INFO, "Battery info:\n");
log_printf(LOG_INFO, "maxCV %dV\n",GBT_BATStat.maxCellVoltage/100); // 0.01v/bit
log_printf(LOG_INFO, "maxCC %dA\n",GBT_BATStat.maxChargingCurrent/10); // 0.1A/bit
log_printf(LOG_INFO, "totE %dkWh\n",GBT_BATStat.totalEnergy/10); // 0.1kWh
log_printf(LOG_INFO, "maxCV %dV\n",GBT_BATStat.maxChargingVoltage/10); // 0.1V/ bit
log_printf(LOG_INFO, "maxT %dC\n",(int16_t)GBT_BATStat.maxTemp-50); // 1C/bit, -50C offset
log_printf(LOG_INFO, "SOC %dp\n",GBT_BATStat.SOC/10); // 0.1%/bit , 0..100%
log_printf(LOG_INFO, "Volt. %dV\n",GBT_BATStat.measVoltage/10); // 0.1V/bit
} else if (strncmp((const char*)buffer, "info2", length) == 0) {
log_printf(LOG_INFO, "EV info:\n");
log_printf(LOG_INFO, "GBT_ver V%d.%d%d\n",GBT_EVInfo.version[0],GBT_EVInfo.version[1],GBT_EVInfo.version[2]);
log_printf(LOG_INFO, "Battery type: %d\n",GBT_EVInfo.batteryType);
log_printf(LOG_INFO, "Battery capacity: %d\n", GBT_EVInfo.batteryCapacity); // 0.1Ah/bit
log_printf(LOG_INFO, "Battery voltage: %d\n", GBT_EVInfo.batteryVoltage); // 0.1V/bit
log_printf(LOG_INFO, "Battery vendor: %.4s\n", GBT_EVInfo.batteryVendor); // Battery vendor (ASCII string)
log_printf(LOG_INFO, "Battery SN: %lu\n", GBT_EVInfo.batterySN); // int
log_printf(LOG_INFO, "Battery manufacture date: %02d.%02d.%04d\n", GBT_EVInfo.batteryManuD, GBT_EVInfo.batteryManuM ,GBT_EVInfo.batteryManuY+1985); // year (offset 1985)
log_printf(LOG_INFO, "Battery cycles: %d\n", GBT_EVInfo.batteryCycleCount); //uint24_t
log_printf(LOG_INFO, "Own auto: %d\n", GBT_EVInfo.ownAuto); // 0 = lizing, 1 = own auto
log_printf(LOG_INFO, "EVIN: %.17s\n", GBT_EVInfo.EVIN); //EVIN
log_printf(LOG_INFO, "EV_SW_VER: %.8s\n", GBT_EVInfo.EV_SW_VER);
} else if (strncmp((const char*)buffer, "info3", length) == 0) {
log_printf(LOG_INFO, "GBT_MaxLoad info:\n");
log_printf(LOG_INFO, "Output max current: %d\n",GBT_MaxLoad.maxOutputCurrent);
log_printf(LOG_INFO, "Output min current: %d\n",GBT_MaxLoad.minOutputCurrent);
log_printf(LOG_INFO, "Output max voltage: %d\n",GBT_MaxLoad.maxOutputVoltage);
log_printf(LOG_INFO, "Output min voltage: %d\n",GBT_MaxLoad.minOutputVoltage);
log_printf(LOG_INFO, "\nGBT_ChargerInfo info:\n");
log_printf(LOG_INFO, "BMS Recognized: %d\n",GBT_ChargerInfo.bmsIdentified);
log_printf(LOG_INFO, "Charger location: %.3s\n",GBT_ChargerInfo.chargerLocation);
log_printf(LOG_INFO, "Charger number: %lu\n",GBT_ChargerInfo.chargerNumber);
} else if (strncmp((const char*)buffer, "help", length) == 0) {
log_printf(LOG_INFO, "Command list:\n");
log_printf(LOG_INFO, "reset\n");
log_printf(LOG_INFO, "help\n");
log_printf(LOG_INFO, "cc_state\n");
log_printf(LOG_INFO, "lock_lock\n");
log_printf(LOG_INFO, "lock_unlock\n");
log_printf(LOG_INFO, "lock_state\n");
log_printf(LOG_INFO, "adc\n");
log_printf(LOG_INFO, "relay(cc,aux,ac,dc)\n");
log_printf(LOG_INFO, "start\n");
log_printf(LOG_INFO, "stop\n");
log_printf(LOG_INFO, "stop1\n");
// log_printf(LOG_INFO, "force\n");
log_printf(LOG_INFO, "temp\n");
log_printf(LOG_INFO, "info1\n");
log_printf(LOG_INFO, "info2\n");
log_printf(LOG_INFO, "info3\n");
log_printf(LOG_INFO, "time\n");
log_printf(LOG_INFO, "cantest\n");
//TODO: info commands
} else if (strncmp((const char*)buffer, "time", length) == 0) {
time_t unix_time = (time_t)get_Current_Time();
struct tm *parts = localtime(&unix_time);
log_printf(LOG_INFO, "Year: %d\n", parts->tm_year + 1900);
log_printf(LOG_INFO, "Month: %d\n", parts->tm_mon + 1);
log_printf(LOG_INFO, "Day: %d\n", parts->tm_mday);
log_printf(LOG_INFO, "Hour: %d\n", parts->tm_hour);
log_printf(LOG_INFO, "Minute: %d\n", parts->tm_min);
log_printf(LOG_INFO, "Second: %d\n", parts->tm_sec);
} else if (strncmp((const char*)buffer, "cantest", length) == 0) {
//GBT_SendCHM();
GBT_Error(0xFDF0C0FC); //BRM Timeout
log_printf(LOG_INFO, "can test\n");
} else {
log_printf(LOG_INFO, "Unknown command\n");
}
}
void debug_task(){
if(debug_cmd_received){
parse_command(debug_rx_buffer, debug_rx_buffer_size);
HAL_UARTEx_ReceiveToIdle_IT(&huart2,debug_rx_buffer,255);
debug_cmd_received = 0;
}
}
#else
#endif // USE_WEB_INTERFACE
Core/Src/dma.c
+14 -18
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file dma.c
* @brief This file provides code for the configuration
* of all the requested memory to memory DMA transfers.
******************************************************************************
* @attention
*
* Copyright (c) 2026 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
@@ -44,8 +28,20 @@ void MX_DMA_Init(void)
/* DMA interrupt init */
/* DMA1_Channel1_IRQn interrupt configuration */
HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
/* DMA1_Channel2_IRQn interrupt configuration */
HAL_NVIC_SetPriority(DMA1_Channel2_IRQn, 4, 0);
HAL_NVIC_EnableIRQ(DMA1_Channel2_IRQn);
/* DMA1_Channel3_IRQn interrupt configuration */
HAL_NVIC_SetPriority(DMA1_Channel3_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(DMA1_Channel3_IRQn);
/* DMA1_Channel6_IRQn interrupt configuration */
HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);
/* DMA1_Channel7_IRQn interrupt configuration */
HAL_NVIC_SetPriority(DMA1_Channel7_IRQn, 4, 0);
HAL_NVIC_EnableIRQ(DMA1_Channel7_IRQn);
}
Core/Src/fire_alarm.c
+20
View File
@@ -0,0 +1,20 @@
#include "fire_alarm.h"
#include "charger_control.h"
#include "debug.h"
#include "serial.h"
static uint8_t fire_alarm_latched = 0;
uint8_t FireAlarm_IsLatched(void) {
return fire_alarm_latched;
}
void FireAlarm_Activate(void) {
if (fire_alarm_latched) {
return;
}
fire_alarm_latched = 1;
log_printf(LOG_ERR, "FIRE ALARM activated\n");
}
Core/Src/gpio.c
+6 -21
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file gpio.c
* @brief This file provides code for the configuration
* of all used GPIO pins.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
@@ -54,7 +38,8 @@ void MX_GPIO_Init(void)
__HAL_RCC_GPIOD_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOC, DBG1_Pin|RELAY_CP_Pin|LOCK_A_Pin|LOCK_B_Pin, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOC, DBG1_Pin|RELAY_CP_Pin|LOCK_A_Pin|LOCK_B_Pin
|LED_DATA_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, DBG2_Pin|DBG3_Pin|RELAY_CC_Pin, GPIO_PIN_RESET);
@@ -69,12 +54,12 @@ void MX_GPIO_Init(void)
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOD, RELAY_DC_Pin|USART2_DIR_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin : DBG1_Pin */
GPIO_InitStruct.Pin = DBG1_Pin;
/*Configure GPIO pins : DBG1_Pin LED_DATA_Pin */
GPIO_InitStruct.Pin = DBG1_Pin|LED_DATA_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(DBG1_GPIO_Port, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/*Configure GPIO pins : RELAY_CP_Pin LOCK_A_Pin LOCK_B_Pin */
GPIO_InitStruct.Pin = RELAY_CP_Pin|LOCK_A_Pin|LOCK_B_Pin;
Core/Src/main.c
+48 -16
View File
@@ -1,4 +1,5 @@
/* USER CODE BEGIN Header */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
@@ -13,15 +14,17 @@
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "can.h"
#include "board.h"
#include <stdio.h>
#include "debug.h"
#include "soft_rtc.h"
#include "connector.h"
#include "serial_control.h"
#include "charger_config.h"
#include "connector.h"
#include "debug.h"
#include "meter.h"
#include "psu_control.h"
#include "rgb_controller.h"
#include "serial.h"
#include "serial_control.h"
#include "soft_rtc.h"
#include <stdio.h>
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -53,6 +56,7 @@ void SystemClock_Config(void);
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
static void StopButtonControl(void);
/**
* @brief Vector base address configuration. It should no longer be at the start of
@@ -97,23 +101,53 @@ void ED_Delay(uint32_t Delay)
while ((HAL_GetTick() - tickstart) < wait){
CCS_SerialLoop();
// CP_Loop();
CONN_Task();
StopButtonControl();
CP_Loop();
LED_Task();
SC_Task();
}
}
void StopButtonControl(){
static void StopButtonControl(void){
static uint32_t tick;
static uint32_t hold_time;
static uint8_t stop_btn_fault = 1;
uint32_t now = HAL_GetTick();
//Charging do nothing
if(!IN_ReadInput(IN_ESTOP)){
CONN.connControl = CMD_STOP;
/* Run no faster than once per 10 ms. */
if((now - tick) < 10){
return;
}
tick = now;
uint8_t pressed = !IN_ReadInput(IN_ESTOP);
if(!pressed){
stop_btn_fault = 0;
}
}
if(stop_btn_fault){
return;
}
uint8_t temp0, temp1;
if(pressed){
if(hold_time == 0){
CONN.connControl = CMD_STOP;
}
hold_time += 10;
if(hold_time == 5000){
CONN.connControl = CMD_FORCE_UNLOCK;
}
if(hold_time > 40000){
SC_SendPacket(NULL, 0, RESP_SUCCESS);
while(huart2.gState == HAL_UART_STATE_BUSY_TX);
HAL_Delay(10);
NVIC_SystemReset();
}
}
else{
hold_time = 0;
}
}
static void CAN1_MinimalReInit(void)
{
@@ -205,8 +239,6 @@ int main(void)
CONN_Loop();
LED_Write();
ED_Delay(10);
StopButtonControl();
ED_Delay(50);
}
/* USER CODE END 3 */
Core/Src/meter.c
+1 -9
View File
@@ -1,13 +1,5 @@
/*
* meter.c
*
* Created on: 27 сент. 2024 г.
* Author: root
*/
#include "meter.h"
#include "charger_config.h"
#include "charger_control.h"
Core/Src/power_setpoint_executor.c
+196
View File
@@ -0,0 +1,196 @@
#include "power_setpoint_executor.h"
#include "charger_config.h"
#include "charger_control.h"
#include "debug.h"
#include "psu_control.h"
#include "serial.h"
static PowerSetpoint_t applied;
static PowerSetpoint_t pending;
static PowerSetpoint_t fd_target;
static uint8_t setpoint_dirty;
static uint8_t fd_active;
static uint8_t power_delivery_latched;
static uint8_t fast_discharge_count;
static uint32_t last_fast_discharge_ms;
static uint32_t measured_high_current_since_ms;
static uint8_t session_ended_state(CONN_State_t state)
{
return (state == Unknown) || (state == Unplugged) || (state == Finished) ||
(state == FinishedEV) || (state == FinishedEVSE);
}
void PowerSetpoint_Init(void)
{
applied.voltage_V = PSU_MIN_VOLTAGE;
applied.current_0p1A = 0u;
pending = applied;
fd_target = applied;
setpoint_dirty = 0u;
fd_active = 0u;
power_delivery_latched = 0u;
fast_discharge_count = 0u;
last_fast_discharge_ms = 0u;
measured_high_current_since_ms = 0u;
}
void PowerSetpoint_OnCommand(uint16_t voltage_V, uint16_t current_0p1A)
{
#if PSD_ENABLE
pending.voltage_V = voltage_V;
pending.current_0p1A = current_0p1A;
setpoint_dirty = 1u;
#else
(void)voltage_V;
(void)current_0p1A;
#endif
}
void PowerSetpoint_UpdateDeliveryLatch(void)
{
#if PSD_ENABLE
uint32_t now = HAL_GetTick();
if (!CONN.EnableOutput || !CONN.EvConnected || session_ended_state(CCS_EvseState)) {
power_delivery_latched = 0u;
fast_discharge_count = 0u;
last_fast_discharge_ms = 0u;
measured_high_current_since_ms = 0u;
return;
}
if (CONN.WantedCurrent > PSD_MAX_CMD_CURRENT_0P1A) {
power_delivery_latched = 1u;
}
if (CCS_EvseState == Charging) {
power_delivery_latched = 1u;
}
if (CONN.MeasuredCurrent >= PSD_MAX_MEASURED_CURRENT_0P1A) {
if (measured_high_current_since_ms == 0u) {
measured_high_current_since_ms = now;
} else if ((now - measured_high_current_since_ms) >= PSD_MEASURED_LATCH_MS) {
power_delivery_latched = 1u;
}
} else {
measured_high_current_since_ms = 0u;
}
#endif
}
uint8_t PowerSetpoint_HasPending(void)
{
#if PSD_ENABLE
return setpoint_dirty;
#else
return 0u;
#endif
}
uint8_t PowerSetpoint_IsBusy(void)
{
#if PSD_ENABLE
if (!fd_active) {
return 0u;
}
switch (PSU0.state) {
case PSU_FAST_DISCHARGE_OFF:
case PSU_FAST_DISCHARGE_WAIT:
case PSU_FAST_DISCHARGE_SET:
case PSU_FAST_DISCHARGE_ON:
case PSU_FAST_DISCHARGE_ON_WAIT:
return 1u;
default:
return 0u;
}
#else
return 0u;
#endif
}
static PowerPathContext_t build_context(void)
{
PowerPathContext_t ctx;
ctx.dc_contactor_closed = PSU0.CONT_enabled;
ctx.psu_hv_enabled = PSU0.PSU_enabled;
ctx.measured_voltage_V = CONN.MeasuredVoltage;
ctx.measured_current_0p1A = (uint16_t)CONN.MeasuredCurrent;
ctx.power_delivery_active = power_delivery_latched;
ctx.enable_output = CONN.EnableOutput;
ctx.psu_state_connected = (PSU0.state == PSU_CONNECTED) ? 1u : 0u;
ctx.psu_cont_fault = PSU0.cont_fault;
ctx.psu_fault = PSU0.psu_fault;
ctx.fast_discharge_count = fast_discharge_count;
ctx.last_fast_discharge_ms = last_fast_discharge_ms;
ctx.now_ms = HAL_GetTick();
return ctx;
}
PowerSetpointTryResult_t PowerSetpoint_TryApply(void)
{
#if PSD_ENABLE
PowerPathContext_t ctx;
PowerSetpointAction_t action;
if (!setpoint_dirty || fd_active) {
return PSD_TRY_IDLE;
}
ctx = build_context();
action = PowerSetpoint_Decide(&applied, &pending, &ctx);
if (action == POWER_SETPOINT_FAST_DISCHARGE) {
fd_target = pending;
fd_active = 1u;
setpoint_dirty = 0u;
log_printf(LOG_INFO, "Fast discharge trigger %u->%u I=%u\n",
(unsigned)applied.voltage_V,
(unsigned)fd_target.voltage_V,
(unsigned)fd_target.current_0p1A);
return PSD_TRY_START_FAST_DISCHARGE;
}
if (!PSU0.ready) {
return PSD_TRY_IDLE;
}
PSU_SetVoltageCurrent(0, pending.voltage_V, pending.current_0p1A);
applied = pending;
setpoint_dirty = 0u;
return PSD_TRY_APPLIED_NORMAL;
#else
return PSD_TRY_IDLE;
#endif
}
void PowerSetpoint_GetFastDischargeTarget(PowerSetpoint_t *target)
{
if (target != 0) {
*target = fd_target;
}
}
void PowerSetpoint_OnFastDischargeComplete(void)
{
#if PSD_ENABLE
applied = fd_target;
fd_active = 0u;
fast_discharge_count++;
last_fast_discharge_ms = HAL_GetTick();
log_printf(LOG_INFO, "Fast discharge complete, V=%u\n", (unsigned)CONN.MeasuredVoltage);
#endif
}
void PowerSetpoint_OnFastDischargeAbort(void)
{
#if PSD_ENABLE
fd_active = 0u;
pending = fd_target;
setpoint_dirty = 1u;
log_printf(LOG_WARN, "Fast discharge aborted, V=%u\n", (unsigned)CONN.MeasuredVoltage);
#endif
}
Core/Src/power_setpoint_policy.c
+77
View File
@@ -0,0 +1,77 @@
#include "power_setpoint_policy.h"
PowerSetpointAction_t PowerSetpoint_Decide(
const PowerSetpoint_t *applied,
const PowerSetpoint_t *next,
const PowerPathContext_t *ctx)
{
#if !PSD_ENABLE
(void)applied;
(void)next;
(void)ctx;
return POWER_SETPOINT_NORMAL;
#else
uint16_t delta_v;
if (applied == 0 || next == 0 || ctx == 0) {
return POWER_SETPOINT_NORMAL;
}
if (next->voltage_V >= applied->voltage_V) {
return POWER_SETPOINT_NORMAL;
}
delta_v = (uint16_t)(applied->voltage_V - next->voltage_V);
if (delta_v < PSD_MIN_VOLTAGE_STEP_V) {
return POWER_SETPOINT_NORMAL;
}
if (applied->current_0p1A > PSD_MAX_CMD_CURRENT_0P1A ||
next->current_0p1A > PSD_MAX_CMD_CURRENT_0P1A) {
return POWER_SETPOINT_NORMAL;
}
if (ctx->measured_current_0p1A >= PSD_MAX_MEASURED_CURRENT_0P1A) {
return POWER_SETPOINT_NORMAL;
}
if (ctx->measured_voltage_V <= (uint16_t)(next->voltage_V + PSD_DISCHARGE_MARGIN_V)) {
return POWER_SETPOINT_NORMAL;
}
if (ctx->power_delivery_active) {
return POWER_SETPOINT_NORMAL;
}
if (!ctx->enable_output) {
return POWER_SETPOINT_NORMAL;
}
if (!ctx->psu_state_connected) {
return POWER_SETPOINT_NORMAL;
}
if (!ctx->dc_contactor_closed) {
return POWER_SETPOINT_NORMAL;
}
if (!ctx->psu_hv_enabled) {
return POWER_SETPOINT_NORMAL;
}
if (ctx->psu_cont_fault || ctx->psu_fault) {
return POWER_SETPOINT_NORMAL;
}
if (ctx->fast_discharge_count >= PSD_MAX_PER_SESSION) {
return POWER_SETPOINT_NORMAL;
}
if (ctx->last_fast_discharge_ms != 0u &&
(ctx->now_ms - ctx->last_fast_discharge_ms) < PSD_DEBOUNCE_MS) {
return POWER_SETPOINT_NORMAL;
}
return POWER_SETPOINT_FAST_DISCHARGE;
#endif
}
Core/Src/psu_control.c
+499 -27
View File
@@ -1,14 +1,14 @@
#include "psu_control.h"
#include <psu_control.h>
#include "board.h"
#include "can.h"
#include "string.h"
#include "stdio.h"
#include "charger_config.h"
#include "charger_control.h"
#include "board.h"
#include "debug.h"
#include "isr_opt.h"
#include "power_setpoint_executor.h"
#include <stdio.h>
#include <string.h>
PSU_02_t PSU_02;
PSU_04_t PSU_04;
@@ -26,12 +26,344 @@ PSU_t PSU0;
#define PSU_VOLTAGE_THRESHOLD 20 // Порог напряжения для определения состояния (В)
#define PSU_ONLINE_TIMEOUT 500 // Таймаут для определения состояния (мс)
#define PSU_STARTUP_DELAY 4000 // Задержка 2 секунды перед включением
#define PSU_DIAG_LOG_MS 2000u
#define PSU_SUDDEN_OFF_DEBOUNCE_MS 200u
uint32_t can_lastpacket;
extern CAN_HandleTypeDef hcan2;
static uint16_t psu_last_can_v;
static uint16_t psu_last_can_i_0p1A;
static uint8_t psu_last_good_s0;
static uint8_t psu_last_good_s1;
static uint8_t psu_last_good_s2;
static void PSU_SendCmd(uint8_t source, uint8_t destination, uint8_t cmd, void *data);
static void PSU_LogActiveStatusFlags(LogLevel_t level);
static void PSU_MonitorStatusAndUnexpectedOff(void);
static const char *PSU_StateName(PSU_State_t state)
{
switch (state) {
case PSU_UNREADY: return "UNREADY";
case PSU_INITIALIZING: return "INIT";
case PSU_READY: return "READY";
case PSU_WAIT_ACK_ON: return "WAIT_ON";
case PSU_CONT_WAIT_ACK_ON: return "CONT_ON";
case PSU_CONNECTED: return "CONNECTED";
case PSU_FAST_DISCHARGE_OFF: return "FD_OFF";
case PSU_FAST_DISCHARGE_WAIT: return "FD_WAIT";
case PSU_FAST_DISCHARGE_SET: return "FD_SET";
case PSU_FAST_DISCHARGE_ON: return "FD_ON";
case PSU_FAST_DISCHARGE_ON_WAIT: return "FD_ON_WAIT";
case PSU_CURRENT_DROP: return "CUR_DROP";
case PSU_CONT_WAIT_ACK_OFF: return "CONT_OFF";
case PSU_WAIT_ACK_OFF: return "WAIT_OFF";
case PSU_OFF_PAUSE: return "OFF_PAUSE";
default: return "?";
}
}
static void PSU_LogPeriodicDiag(void)
{
static uint32_t last_log_ms;
uint32_t now = HAL_GetTick();
uint8_t block_setpoint;
/* Periodic PSU telemetry only while session is in Charging. */
if (CONN.connState != Charging) {
return;
}
if ((now - last_log_ms) < PSU_DIAG_LOG_MS) {
return;
}
last_log_ms = now;
#if PSD_ENABLE
block_setpoint = PowerSetpoint_HasPending() || PowerSetpoint_IsBusy();
#else
block_setpoint = 0u;
#endif
log_printf(LOG_INFO,
"PSU diag st=%s req=%uV/%u.%uA want=%uV/%u.%uA "
"can=%uV/%u.%uA meas=%uV/%d.%uA "
"enOut=%u out=%u rdy=%u on=%u cont=%u ac=%u hv=%u psd_blk=%u "
"err=%u s0=0x%02x s1=0x%02x s2=0x%02x can_age=%lums\n",
PSU_StateName(PSU0.state),
(unsigned)CONN.RequestedVoltage,
(unsigned)(CONN.RequestedCurrent / 10u),
(unsigned)(CONN.RequestedCurrent % 10u),
(unsigned)CONN.RequestedVoltage,
(unsigned)(CONN.WantedCurrent / 10u),
(unsigned)(CONN.WantedCurrent % 10u),
(unsigned)psu_last_can_v,
(unsigned)(psu_last_can_i_0p1A / 10u),
(unsigned)(psu_last_can_i_0p1A % 10u),
(unsigned)CONN.MeasuredVoltage,
(int)(CONN.MeasuredCurrent / 10),
(unsigned)(((CONN.MeasuredCurrent < 0) ?
-CONN.MeasuredCurrent : CONN.MeasuredCurrent) % 10),
(unsigned)CONN.EnableOutput,
(unsigned)CONN.outputEnabled,
(unsigned)PSU0.ready,
(unsigned)PSU0.PSU_enabled,
(unsigned)PSU0.CONT_enabled,
(unsigned)PSU0.enableAC,
(unsigned)CONN.hv_limit,
(unsigned)block_setpoint,
(unsigned)CONN.chargingError,
(unsigned)PSU0.status0.raw,
(unsigned)PSU0.status1.raw,
(unsigned)PSU0.status2.raw,
(unsigned long)(can_lastpacket ? (now - can_lastpacket) : 9999u));
}
static void PSU_LogActiveStatusFlags(LogLevel_t level)
{
PSU_Status0_t s0 = PSU0.status0.bits;
PSU_Status1_t s1 = PSU0.status1.bits;
PSU_Status2_t s2 = PSU0.status2.bits;
log_printf(level,
"PSU flags%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
s0.shortCircuitFault ? " sc" : "",
s0.unevenFlowAlarm ? " uneven" : "",
s0.internalCommunicationFault ? " int_comm" : "",
s0.inputBusLineFault ? " in_bus" : "",
s0.lockProtection ? " lock" : "",
s0.dischargeFault ? " disch" : "",
s0.eepromFault ? " eeprom" : "",
s1.dcSideOffStatus ? " dc_off" : "",
s1.moduleFaultAlarm ? " fault" : "",
s1.moduleProtectionAlarm ? " prot" : "",
s1.fanFaultAlarm ? " fan" : "",
s1.overTempAlarm ? " ot" : "",
s1.outputOverVoltageAlarm ? " oov" : "",
s1.outputOverCurrentAlarm ? " ooc" : "",
s1.canCommunicationInterruptAlarm ? " can_int" : "",
s2.powerLimitStatus ? " plim" : "",
s2.moduleAddressDuplicate ? " addr_dup" : "",
s2.severeUnevenFlowFault ? " uneven_hi" : "",
s2.threePhaseInputPhaseLossAlarm ? " ph_loss" : "",
s2.threePhaseInputUnbalanceAlarm ? " unbal" : "",
s2.inputUnderVoltageAlarm ? " uv" : "",
s2.inputOverVoltageAlarm ? " ov" : "",
s2.pfcSideOffStatus ? " pfc_off" : "");
}
/*
* Observability only: does not change PSU/contactor state machine.
* Armed only in CONN Charging phase:
* - status bit edges while output is requested
* - PSU_enabled 1->0 while CONNECTED + EnableOutput (sudden disable)
*
* Note: PSU_enabled is derived from V >= PSU_VOLTAGE_THRESHOLD, not from
* the module enable command bit.
*/
static void PSU_MonitorStatusAndUnexpectedOff(void)
{
static uint8_t prev_s0;
static uint8_t prev_s1;
static uint8_t prev_s2;
static uint8_t prev_enabled;
static uint8_t inited;
static uint8_t sudden_latched;
static uint32_t sudden_cand_ms;
uint32_t now = HAL_GetTick();
uint8_t in_charging;
uint8_t watch_status;
uint8_t expect_on;
in_charging = (CONN.connState == Charging);
watch_status = in_charging && (CONN.EnableOutput != 0) && (PSU0.online != 0) &&
((PSU0.state == PSU_CONNECTED) ||
(PSU0.state == PSU_WAIT_ACK_ON) ||
(PSU0.state == PSU_CONT_WAIT_ACK_ON));
expect_on = in_charging && (CONN.EnableOutput != 0) && (PSU0.state == PSU_CONNECTED);
if (!inited) {
prev_s0 = PSU0.status0.raw;
prev_s1 = PSU0.status1.raw;
prev_s2 = PSU0.status2.raw;
prev_enabled = PSU0.PSU_enabled;
inited = 1u;
return;
}
if (watch_status) {
if ((PSU0.status0.raw != prev_s0) ||
(PSU0.status1.raw != prev_s1) ||
(PSU0.status2.raw != prev_s2)) {
log_printf(LOG_WARN,
"PSU status change s0=0x%02x->0x%02x s1=0x%02x->0x%02x s2=0x%02x->0x%02x\n",
(unsigned)prev_s0, (unsigned)PSU0.status0.raw,
(unsigned)prev_s1, (unsigned)PSU0.status1.raw,
(unsigned)prev_s2, (unsigned)PSU0.status2.raw);
PSU_LogActiveStatusFlags(LOG_WARN);
}
}
prev_s0 = PSU0.status0.raw;
prev_s1 = PSU0.status1.raw;
prev_s2 = PSU0.status2.raw;
if (!expect_on) {
sudden_cand_ms = 0u;
if ((CONN.EnableOutput == 0) ||
(CONN.connState != Charging) ||
(PSU0.state == PSU_READY) ||
(PSU0.state == PSU_UNREADY) ||
(PSU0.state == PSU_OFF_PAUSE) ||
(PSU0.state == PSU_WAIT_ACK_OFF) ||
(PSU0.state == PSU_CONT_WAIT_ACK_OFF) ||
(PSU0.state == PSU_CURRENT_DROP)) {
sudden_latched = 0u;
}
prev_enabled = PSU0.PSU_enabled;
return;
}
if (PSU0.PSU_enabled) {
sudden_cand_ms = 0u;
sudden_latched = 0u;
prev_enabled = 1u;
return;
}
if (sudden_latched) {
prev_enabled = 0u;
return;
}
if (!prev_enabled) {
sudden_cand_ms = 0u;
return;
}
/* Falling edge of PSU_enabled while still CONNECTED + EnableOutput + Charging */
if (!PSU0.online) {
log_printf(LOG_ERR,
"PSU suddenly disabled while charging reason=can_lost "
"V=%u I=%d cont=%u s0=0x%02x s1=0x%02x s2=0x%02x can_age=%lums\n",
(unsigned)PSU0.outputVoltage,
(int)PSU0.outputCurrent,
(unsigned)PSU0.CONT_enabled,
(unsigned)psu_last_good_s0,
(unsigned)psu_last_good_s1,
(unsigned)psu_last_good_s2,
(unsigned long)(can_lastpacket ? (now - can_lastpacket) : 9999u));
PSU_LogActiveStatusFlags(LOG_ERR);
sudden_latched = 1u;
sudden_cand_ms = 0u;
prev_enabled = 0u;
return;
}
if (sudden_cand_ms == 0u) {
sudden_cand_ms = now;
return;
}
if ((now - sudden_cand_ms) < PSU_SUDDEN_OFF_DEBOUNCE_MS) {
return;
}
log_printf(LOG_ERR,
"PSU suddenly disabled while charging reason=output_lost "
"V=%u I=%d cont=%u s0=0x%02x s1=0x%02x s2=0x%02x can_age=%lums\n",
(unsigned)PSU0.outputVoltage,
(int)PSU0.outputCurrent,
(unsigned)PSU0.CONT_enabled,
(unsigned)PSU0.status0.raw,
(unsigned)PSU0.status1.raw,
(unsigned)PSU0.status2.raw,
(unsigned long)(can_lastpacket ? (now - can_lastpacket) : 9999u));
PSU_LogActiveStatusFlags(LOG_ERR);
sudden_latched = 1u;
sudden_cand_ms = 0u;
prev_enabled = 0u;
}
static void PSU_HvControl(void)
{
if (CONN.EnableOutput == 0u) {
if ((CONN.hv_limit != 0u) || (CONN.hv_limit_count != 0u)) {
log_printf(LOG_INFO, "HV limit reset output off\n");
}
CONN.hv_limit = 0u;
CONN.hv_tick = 0u;
CONN.hv_limit_count = 0u;
return;
}
if (!PSU0.online) {
if ((CONN.hv_limit != 0u) || (CONN.hv_limit_count != 0u)) {
log_printf(LOG_INFO, "HV limit reset no PSU\n");
}
CONN.hv_limit = 0u;
CONN.hv_tick = 0u;
CONN.hv_limit_count = 0u;
return;
}
if (CONN.hv_limit == 0u) {
if ((CONN.hv_limit_count < PSU_HV_LIMIT_MAX_COUNT) &&
(CONN.MeasuredVoltage < PSU_HV_LIMIT_ON_THRESHOLD) &&
(CONN.MeasuredCurrent > PSU_HV_LOAD_CURRENT)) {
if (CONN.hv_tick == 0u) {
CONN.hv_tick = HAL_GetTick();
} else if ((HAL_GetTick() - CONN.hv_tick) >= PSU_HV_SWITCH_DELAY_MS) {
CONN.hv_limit = 1u;
CONN.hv_limit_count++;
CONN.hv_tick = 0u;
log_printf(LOG_WARN, "HV limit ON V=%d I=%d cnt=%d\n",
(int)CONN.MeasuredVoltage,
(int)CONN.MeasuredCurrent,
(int)CONN.hv_limit_count);
if (CONN.hv_limit_count >= PSU_HV_LIMIT_MAX_COUNT) {
log_printf(LOG_WARN, "HV limit locked cnt=%d\n",
(int)CONN.hv_limit_count);
}
}
} else {
CONN.hv_tick = 0u;
}
} else {
if ((CONN.MeasuredVoltage > PSU_HV_LIMIT_OFF_THRESHOLD) ||
(CONN.MeasuredCurrent <= PSU_HV_LOAD_CURRENT)) {
if (CONN.hv_tick == 0u) {
CONN.hv_tick = HAL_GetTick();
} else if ((HAL_GetTick() - CONN.hv_tick) >= PSU_HV_SWITCH_DELAY_MS) {
CONN.hv_limit = 0u;
CONN.hv_tick = 0u;
log_printf(LOG_INFO, "HV limit OFF V=%d I=%d cnt=%d\n",
(int)CONN.MeasuredVoltage,
(int)CONN.MeasuredCurrent,
(int)CONN.hv_limit_count);
}
} else {
CONN.hv_tick = 0u;
}
}
}
static void PSU_SwitchState(PSU_State_t state){
if (PSU0.state != state) {
log_printf(LOG_INFO,
"PSU st %s->%s enOut=%u rdy=%u on=%u cont=%u err=%u\n",
PSU_StateName(PSU0.state),
PSU_StateName(state),
(unsigned)CONN.EnableOutput,
(unsigned)PSU0.ready,
(unsigned)PSU0.PSU_enabled,
(unsigned)PSU0.CONT_enabled,
(unsigned)CONN.chargingError);
}
PSU0.state = state;
PSU0.statetick = HAL_GetTick();
}
@@ -40,6 +372,24 @@ static uint32_t PSU_StateTime(void){
return HAL_GetTick() - PSU0.statetick;
}
static void PSU_FastDischarge_PushTarget(void)
{
PowerSetpoint_t fd_sp;
PowerSetpoint_GetFastDischargeTarget(&fd_sp);
PSU_SetVoltageCurrent(0, fd_sp.voltage_V, fd_sp.current_0p1A);
PSU_Enable(0, 1);
}
static void PSU_FastDischarge_AbortToConnected(void)
{
PowerSetpoint_OnFastDischargeAbort();
if (!PSU0.PSU_enabled) {
PSU_FastDischarge_PushTarget();
}
PSU_SwitchState(PSU_CONNECTED);
}
ISR_FAST void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan){
static CAN_RxHeaderTypeDef RxHeader;
@@ -64,6 +414,9 @@ ISR_FAST void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan){
PSU0.status0.raw = PSU_04.modularForm0;
PSU0.status1.raw = PSU_04.modularForm1;
PSU0.status2.raw = PSU_04.modularForm2;
psu_last_good_s0 = PSU0.status0.raw;
psu_last_good_s1 = PSU0.status1.raw;
psu_last_good_s2 = PSU0.status2.raw;
}
if(CanId.command==0x06){
memcpy(&PSU_06, RxData, 8);
@@ -149,9 +502,9 @@ void PSU_Init(){
PSU0.statetick = HAL_GetTick();
PSU0.power_limit = PSU_MAX_POWER; // kW
PSU0.hv_mode = 0;
PSU_Enable(0, 0);
PowerSetpoint_Init();
}
void PSU_Enable(uint8_t addr, uint8_t enable){
@@ -181,7 +534,9 @@ void PSU_SetVoltageCurrent(uint8_t addr, uint16_t voltage, uint16_t current){
if(voltage<PSU_MIN_VOLTAGE) voltage = PSU_MIN_VOLTAGE;
if((PSU0.hv_mode==0) && voltage>499) voltage = 499;
if((CONN.hv_limit != 0u) && (voltage > PSU_LV_CLAMP_V)){
voltage = PSU_LV_CLAMP_V;
}
uint32_t current_ma = current * 100;
uint32_t voltage_mv = voltage * 1000;
@@ -196,6 +551,8 @@ void PSU_SetVoltageCurrent(uint8_t addr, uint16_t voltage, uint16_t current){
data.moduleVoltage[2] = (voltage_mv >> 8) & 0xFF;
data.moduleVoltage[3] = (voltage_mv >> 0) & 0xFF;
psu_last_can_v = voltage;
psu_last_can_i_0p1A = current;
PSU_SendCmd(0xF0, addr, 0x1C, &data);
}
@@ -226,7 +583,6 @@ void PSU_SendCmd(uint8_t source, uint8_t destination, uint8_t cmd, void *data){
/* если отправка удалась, выход */
if(CAN_result == HAL_OK) {
return;
retry_counter = 0;
}
}
ED_Delay(1);
@@ -236,11 +592,6 @@ void PSU_SendCmd(uint8_t source, uint8_t destination, uint8_t cmd, void *data){
}
uint32_t max(uint32_t a, uint32_t b){
if(a>b) return a;
else return b;
}
void PSU_ReadWrite(){
uint8_t zero_data[8] = {0,0,0,0,0,0,0,0};
@@ -262,28 +613,50 @@ void PSU_ReadWrite(){
}
CONN.RequestedPower = CONN.RequestedCurrent * CONN.RequestedVoltage / 10;
if(PSU0.ready){
if (CONN.RequestedVoltage == 500) { // fake
PSU_SetVoltageCurrent(0, 300, 10); // Normal mode
}else{
PSU_SetVoltageCurrent(0, CONN.RequestedVoltage, CONN.RequestedCurrent); // Normal mode
}
ED_Delay(CAN_DELAY);
if(CONN.MeasuredVoltage>490) PSU0.hv_mode = 1;
}
#if PSD_ENABLE
{
uint8_t block_setpoint = PowerSetpoint_HasPending() || PowerSetpoint_IsBusy();
// PSU_SetHVMode(0, PSU0.hv_mode); // auto set, no need
// ED_Delay(CAN_DELAY);
if (PSU0.ready && !block_setpoint) {
PSU_SetVoltageCurrent(0, CONN.RequestedVoltage, CONN.RequestedCurrent);
ED_Delay(CAN_DELAY);
}
}
#else
if (PSU0.ready) {
PSU_SetVoltageCurrent(0, CONN.RequestedVoltage, CONN.RequestedCurrent); // Normal mode
ED_Delay(CAN_DELAY);
}
#endif
if (PSU0.ready) {
PSU_HvControl();
}
}
void PSU_Task(void){
static uint32_t psu_on_tick = 0;
static uint32_t dc_on_tick = 0;
static uint32_t cont_ok_tick = 0;
static uint32_t fd_on_last_cmd_ms = 0;
PowerSetpointTryResult_t psd_result;
#if PSD_ENABLE
PowerSetpoint_UpdateDeliveryLatch();
if (PowerSetpoint_HasPending()) {
psd_result = PowerSetpoint_TryApply();
if (psd_result == PSD_TRY_START_FAST_DISCHARGE) {
PSU_SwitchState(PSU_FAST_DISCHARGE_OFF);
}
}
#endif
// Обновляем ONLINE/READY по таймауту
if((HAL_GetTick() - can_lastpacket) > PSU_ONLINE_TIMEOUT){
if (PSU0.online) {
log_printf(LOG_WARN, "PSU CAN timeout age=%lums -> offline\n",
(unsigned long)(HAL_GetTick() - can_lastpacket));
}
PSU0.online = 0;
PSU0.PSU_enabled = 0;
PSU_04.moduleTemperature = 0;
@@ -324,6 +697,9 @@ void PSU_Task(void){
PSU0.ready = 0;
}
/* Before state transitions so CONNECTED+can_lost is still visible */
PSU_MonitorStatusAndUnexpectedOff();
switch(PSU0.state){
case PSU_UNREADY:
PSU0.enableOutput = 0;
@@ -342,7 +718,9 @@ void PSU_Task(void){
case PSU_READY:
// модуль готов, но выключен
PSU0.hv_mode = 0;
CONN.hv_limit = 0u;
CONN.hv_tick = 0u;
CONN.hv_limit_count = 0u;
RELAY_Write(RELAY_DC, 0);
if(!PSU0.ready){
@@ -358,7 +736,6 @@ void PSU_Task(void){
case PSU_WAIT_ACK_ON:
if(PSU0.PSU_enabled && PSU0.ready){
dc_on_tick = HAL_GetTick();
PSU_SwitchState(PSU_CONT_WAIT_ACK_ON);
}else if(PSU_StateTime() > 10000){
PSU0.psu_fault = 1;
@@ -400,6 +777,99 @@ void PSU_Task(void){
}
break;
case PSU_FAST_DISCHARGE_OFF:
if (!CONN.EnableOutput || !PSU0.ready || PSU0.cont_fault || PSU0.psu_fault) {
log_printf(LOG_WARN, "Fast discharge abort -> stop\n");
PowerSetpoint_OnFastDischargeAbort();
PSU_SwitchState(PSU_CURRENT_DROP);
break;
}
PSU_Enable(0, 0);
PSU_SwitchState(PSU_FAST_DISCHARGE_WAIT);
break;
case PSU_FAST_DISCHARGE_WAIT: {
PowerSetpoint_t fd_sp;
if (!CONN.EnableOutput || !PSU0.ready || PSU0.cont_fault || PSU0.psu_fault) {
log_printf(LOG_WARN, "Fast discharge abort -> stop\n");
PowerSetpoint_OnFastDischargeAbort();
PSU_SwitchState(PSU_CURRENT_DROP);
break;
}
/* Как PSU_WAIT_ACK_OFF: 0–20 V на телеметрии = модуль выключен */
if (!PSU0.PSU_enabled) {
PowerSetpoint_GetFastDischargeTarget(&fd_sp);
log_printf(LOG_INFO, "Fast discharge off ack, V=%u -> set %u\n",
(unsigned)CONN.MeasuredVoltage, (unsigned)fd_sp.voltage_V);
PSU_SwitchState(PSU_FAST_DISCHARGE_SET);
} else if (PSU_StateTime() > PSD_OFF_TIMEOUT_MS) {
log_printf(LOG_WARN, "Fast discharge off timeout, V=%u\n",
(unsigned)CONN.MeasuredVoltage);
PSU_FastDischarge_AbortToConnected();
}
break;
}
case PSU_FAST_DISCHARGE_SET: {
PowerSetpoint_t fd_sp;
if (!CONN.EnableOutput || !PSU0.ready || PSU0.cont_fault || PSU0.psu_fault) {
log_printf(LOG_WARN, "Fast discharge abort -> stop\n");
PowerSetpoint_OnFastDischargeAbort();
PSU_SwitchState(PSU_CURRENT_DROP);
break;
}
PowerSetpoint_GetFastDischargeTarget(&fd_sp);
PSU_SetVoltageCurrent(0, fd_sp.voltage_V, fd_sp.current_0p1A);
PSU_SwitchState(PSU_FAST_DISCHARGE_ON);
break;
}
case PSU_FAST_DISCHARGE_ON:
if (!CONN.EnableOutput || !PSU0.ready || PSU0.cont_fault || PSU0.psu_fault) {
log_printf(LOG_WARN, "Fast discharge abort -> stop\n");
PowerSetpoint_OnFastDischargeAbort();
PSU_SwitchState(PSU_CURRENT_DROP);
break;
}
PSU_Enable(0, 1);
fd_on_last_cmd_ms = HAL_GetTick();
PSU_SwitchState(PSU_FAST_DISCHARGE_ON_WAIT);
break;
case PSU_FAST_DISCHARGE_ON_WAIT: {
PowerSetpoint_t fd_sp;
uint16_t v_low;
if (!CONN.EnableOutput || !PSU0.ready || PSU0.cont_fault || PSU0.psu_fault) {
log_printf(LOG_WARN, "Fast discharge abort -> stop\n");
PowerSetpoint_OnFastDischargeAbort();
PSU_SwitchState(PSU_CURRENT_DROP);
break;
}
PowerSetpoint_GetFastDischargeTarget(&fd_sp);
v_low = (fd_sp.voltage_V > PSD_PRECHARGE_TOLERANCE_V) ?
(uint16_t)(fd_sp.voltage_V - PSD_PRECHARGE_TOLERANCE_V) : 0u;
if (PSU0.PSU_enabled && CONN.MeasuredVoltage >= v_low) {
PowerSetpoint_OnFastDischargeComplete();
PSU_SwitchState(PSU_CONNECTED);
} else {
if ((HAL_GetTick() - fd_on_last_cmd_ms) >= PSD_ON_RETRY_MS) {
PSU_FastDischarge_PushTarget();
fd_on_last_cmd_ms = HAL_GetTick();
}
if (PSU_StateTime() > PSD_ON_TIMEOUT_MS) {
log_printf(LOG_WARN, "Fast discharge on timeout, V=%u (target %u)\n",
(unsigned)CONN.MeasuredVoltage, (unsigned)fd_sp.voltage_V);
PSU_FastDischarge_AbortToConnected();
}
}
break;
}
case PSU_CURRENT_DROP:
// снижаем ток до нуля перед отключением DC
CONN.RequestedCurrent = 0;
@@ -446,6 +916,8 @@ void PSU_Task(void){
PSU_SwitchState(PSU_UNREADY);
break;
}
PSU_LogPeriodicDiag();
}
Core/Src/rgb_controller.c
+378 -147
View File
@@ -1,147 +1,255 @@
#include "rgb_controller.h"
#include "main.h"
#include "string.h"
#include "charger_control.h"
#include "board.h"
#include "charger_control.h"
#include "main.h"
#include "tim.h"
#include <string.h>
/* Второй светодиод в цепочке WS2812 */
static RGB_t ws2812_led1 = { .R = 0, .G = 0, .B = 0 };
#define WS2812_ERROR_BLINK_MS 100
#define WS2812_ERROR_BLINK_PAUSE 30
/* Яркость обоих WS2812 на плате, 0..255 */
#define WS2812_BRIGHTNESS 60
RGB_State_t LED_State;
RGB_Cycle_t LED_Cycle;
RGB_Cycle_t color_estop = {
static const RGB_Cycle_t color_estop = {
.Color1 = { .R = 250, .G = 0, .B = 0 },
.Color2 = { .R = 250, .G = 0, .B = 0 },
.Tr = 50,
.Th = 50,
.Tf = 50,
.Tl = 50,
.Color2 = { .R = 0, .G = 0, .B = 0 },
.Tr = 40,
.Th = 10,
.Tf = 40,
.Tl = 10,
};
static const RGB_Cycle_t color_unlock = {
.Color1 = { .R = 255, .G = 0, .B = 0 },
.Color2 = { .R = 0, .G = 0, .B = 0 },
.Tr = 10,
.Th = 10,
.Tf = 10,
.Tl = 10,
};
RGB_Cycle_t color_unknown = {
.Color1 = { .R = 64, .G = 0, .B = 0 },
.Color2 = { .R = 64, .G = 0, .B = 0 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
/* Same init shimmer as AC22/tkzu22: hue=85, sat breathes 30↔250 (not fade-to-black). */
static uint8_t lighting_init_active;
RGB_Cycle_t color_light = {
.Color1 = { .R = 0, .G = 255, .B = 0 },
.Color2 = { .R = 0, .G = 255, .B = 0 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
static void LED_HsvToRgb(uint8_t hue, uint8_t sat, uint8_t val, RGB_t *out)
{
uint8_t region;
uint8_t remainder;
uint8_t p;
uint8_t q;
uint8_t t;
RGB_Cycle_t color_disabled = {
.Color1 = { .R = 250, .G = 0, .B = 0 },
.Color2 = { .R = 32, .G = 0, .B = 0 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
RGB_Cycle_t color_unplugged = {
.Color1 = { .R = 0, .G = 128, .B = 0 },
.Color2 = { .R = 0, .G = 128, .B = 0 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
RGB_Cycle_t color_preparing = {
.Color1 = { .R = 0, .G = 0, .B = 250 },
.Color2 = { .R = 0, .G = 0, .B = 250 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
RGB_Cycle_t color_charging = {
.Color1 = { .R = 0, .G = 255, .B = 0 },
.Color2 = { .R = 0, .G = 32, .B = 0 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
RGB_Cycle_t color_finished = {
.Color1 = { .R = 255, .G = 255, .B = 255 },
.Color2 = { .R = 255, .G = 255, .B = 255 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
RGB_Cycle_t color_error = {
.Color1 = { .R = 255, .G = 0, .B = 0 },
.Color2 = { .R = 32, .G = 0, .B = 0 },
.Tr = 50,
.Th = 10,
.Tf = 50,
.Tl = 0,
};
void LED_Write(){
if(CONN.chargingError != CONN_NO_ERROR){
LED_SetColor(&color_error);
if (sat == 0U) {
out->R = out->G = out->B = val;
return;
}
switch(CONN.connState){
case Unknown:
LED_SetColor(&color_unknown);
region = (uint8_t)(hue / 43U);
remainder = (uint8_t)((hue - (uint8_t)(region * 43U)) * 6U);
p = (uint8_t)((val * (255U - sat)) >> 8);
q = (uint8_t)((val * (255U - ((sat * remainder) >> 8))) >> 8);
t = (uint8_t)((val * (255U - ((sat * (255U - remainder)) >> 8))) >> 8);
switch (region) {
case 0:
out->R = val;
out->G = t;
out->B = p;
break;
case Unplugged:
LED_SetColor(&color_unplugged);
case 1:
out->R = q;
out->G = val;
out->B = p;
break;
case Disabled:
LED_SetColor(&color_error);
case 2:
out->R = p;
out->G = val;
out->B = t;
break;
case Preparing:
LED_SetColor(&color_preparing);
case 3:
out->R = p;
out->G = q;
out->B = val;
break;
case AuthRequired:
LED_SetColor(&color_preparing);
break;
case WaitingForEnergy:
LED_SetColor(&color_charging);
break;
case ChargingPausedEV:
LED_SetColor(&color_charging);
break;
case ChargingPausedEVSE:
LED_SetColor(&color_charging);
break;
case Charging:
LED_SetColor(&color_charging);
break;
case AuthTimeout:
LED_SetColor(&color_finished);
break;
case Finished:
LED_SetColor(&color_finished);
break;
case FinishedEVSE:
LED_SetColor(&color_finished);
break;
case FinishedEV:
LED_SetColor(&color_finished);
break;
case Replugging:
LED_SetColor(&color_preparing);
case 4:
out->R = t;
out->G = p;
out->B = val;
break;
default:
LED_SetColor(&color_unknown);
out->R = val;
out->G = p;
out->B = q;
break;
}
}
/** AC22-compatible init «перелив»: fixed green hue, saturation pulse. */
static void LED_RenderInitShimmer(void)
{
static uint8_t sat = 250U;
static uint8_t rising = 0U;
const uint8_t hue = 85U;
const uint8_t val = 245U;
if (sat >= 250U) {
rising = 0U;
}
if (sat <= 30U) {
rising = 1U;
}
if (rising) {
sat = (sat <= 246U) ? (uint8_t)(sat + 4U) : 250U;
} else {
sat = (sat >= 34U) ? (uint8_t)(sat - 4U) : 30U;
}
LED_HsvToRgb(hue, sat, val, &LED_State.color);
}
static LightingConfigPacket_t committed_lighting = {
.mode = 0,
.roles = {
{ 0, 128, 0, 100, 0, 40, 0 },
{ 0, 0, 255, 100, 1, 55, 100 },
{ 0, 255, 0, 100, 1, 40, 87 },
{ 255, 255, 255, 100, 0, 40, 0 },
{ 255, 0, 0, 100, 1, 50, 87 },
},
};
static LightingConfigPacket_t preview_lighting;
static uint32_t preview_expires_at;
static uint8_t preview_active;
static RGB_Cycle_t LED_CycleFromRole(const LightingRolePacket_t *role)
{
const uint8_t fade_to_black = role->fadeTo >= 95;
RGB_Cycle_t cycle = {
.Color1 = {
.R = (uint8_t)((uint16_t)role->r * role->brightness / 100),
.G = (uint8_t)((uint16_t)role->g * role->brightness / 100),
.B = (uint8_t)((uint16_t)role->b * role->brightness / 100),
},
.Tr = (uint8_t)((100 - role->speed) < 5 ? 5 : (100 - role->speed)),
.Th = 10,
.Tf = (uint8_t)((100 - role->speed) < 5 ? 5 : (100 - role->speed)),
.Tl = fade_to_black ? 10 : 0,
};
if (role->effect == 0) {
cycle.Color2 = cycle.Color1;
} else {
cycle.Color2.R = (uint8_t)((uint16_t)cycle.Color1.R * (100 - role->fadeTo) / 100);
cycle.Color2.G = (uint8_t)((uint16_t)cycle.Color1.G * (100 - role->fadeTo) / 100);
cycle.Color2.B = (uint8_t)((uint16_t)cycle.Color1.B * (100 - role->fadeTo) / 100);
}
return cycle;
}
static uint8_t LED_IsLightingConfigValid(const LightingConfigPacket_t *config)
{
if (config == NULL || config->mode > 1 || (config->flags & 0xFE) != 0 ||
config->reserved != 0 || ((config->flags & 0x01) && config->previewSec == 0) ||
(!(config->flags & 0x01) && config->previewSec != 0)) {
return 0;
}
for (uint8_t i = 0; i < 5; i++) {
const LightingRolePacket_t *role = &config->roles[i];
if (role->brightness > 100 || role->effect > 1 || role->speed > 100 || role->fadeTo > 100) {
return 0;
}
}
return 1;
}
uint8_t LED_ApplyLightingConfig(const LightingConfigPacket_t *config)
{
if (!LED_IsLightingConfigValid(config)) {
return 0;
}
if (config->flags & 0x01) {
memcpy(&preview_lighting, config, sizeof(preview_lighting));
preview_active = 1;
preview_expires_at = HAL_GetTick() + ((uint32_t)config->previewSec * 1000U);
} else {
memcpy(&committed_lighting, config, sizeof(committed_lighting));
preview_active = 0;
}
return 1;
}
void LED_Write(void)
{
const LightingConfigPacket_t *lighting = &committed_lighting;
RGB_Cycle_t cycle;
lighting_init_active = 0;
if (CONN.connControl == CMD_STOP) {
LED_SetColor(&color_estop);
return;
}
if (CONN.chargingError != CONN_NO_ERROR || CONN.connState == Disabled) {
cycle = LED_CycleFromRole(&lighting->roles[4]);
LED_SetColor(&cycle);
return;
}
if (preview_active && (int32_t)(HAL_GetTick() - preview_expires_at) >= 0) {
preview_active = 0;
}
if (preview_active) {
lighting = &preview_lighting;
}
if (lighting->mode == 1) {
RGB_Cycle_t off = { 0 };
LED_SetColor(&off);
return;
}
if (CONN.connControl == CMD_FORCE_UNLOCK) {
LED_SetColor(&color_unlock);
return;
}
if (CONN.connState == Unknown) {
lighting_init_active = 1;
return;
}
switch (CONN.connState) {
case Unplugged:
cycle = LED_CycleFromRole(&lighting->roles[0]);
break;
case Preparing:
case AuthRequired:
case Replugging:
cycle = LED_CycleFromRole(&lighting->roles[1]);
break;
case WaitingForEnergy:
case ChargingPausedEV:
case ChargingPausedEVSE:
case Charging:
cycle = LED_CycleFromRole(&lighting->roles[2]);
break;
case AuthTimeout:
case Finished:
case FinishedEVSE:
case FinishedEV:
cycle = LED_CycleFromRole(&lighting->roles[3]);
break;
default:
lighting_init_active = 1;
return;
}
LED_SetColor(&cycle);
}
void interpolateColors(RGB_t* color1, RGB_t* color2, uint16_t a, uint16_t b, RGB_t *result) {
@@ -161,13 +269,150 @@ void interpolateColors(RGB_t* color1, RGB_t* color2, uint16_t a, uint16_t b, RGB
}
#pragma GCC push_options
#pragma GCC optimize("O2")
#define WS2812_T0H_NOP 25
#define WS2812_T0L_NOP 52
#define WS2812_T1H_NOP 52
#define WS2812_T1L_NOP 25
#define _WS2812_DELAY_NOPS(n) __asm volatile(".rept " #n "\nnop\n.endr" ::: "memory")
#define WS2812_DELAY_NOPS(n) _WS2812_DELAY_NOPS(n)
static void ws2812_send_pixel(uint8_t r, uint8_t g, uint8_t b)
{
uint32_t tmp = ~(((uint32_t)g << 16) | ((uint32_t)r << 8) | (uint32_t)b);
for (int i = 0; i < 24; i++) {
LED_DATA_GPIO_Port->BSRR = LED_DATA_Pin;
if (tmp & (1U << 23)) {
WS2812_DELAY_NOPS(WS2812_T0H_NOP);
LED_DATA_GPIO_Port->BRR = LED_DATA_Pin;
WS2812_DELAY_NOPS(WS2812_T0L_NOP);
} else {
WS2812_DELAY_NOPS(WS2812_T1H_NOP);
LED_DATA_GPIO_Port->BRR = LED_DATA_Pin;
WS2812_DELAY_NOPS(WS2812_T1L_NOP);
}
tmp <<= 1;
}
}
static void ws2812_update(RGB_t *led0, RGB_t *led1)
{
uint32_t primask = __get_PRIMASK();
__disable_irq();
ws2812_send_pixel(led0->R, led0->G, led0->B);
ws2812_send_pixel(led1->R, led1->G, led1->B);
__set_PRIMASK(primask);
}
#pragma GCC pop_options
static RGB_t RGB_ScaleBrightness(const RGB_t *color)
{
RGB_t out = {
.R = (uint8_t)((uint16_t)color->R * WS2812_BRIGHTNESS / 255),
.G = (uint8_t)((uint16_t)color->G * WS2812_BRIGHTNESS / 255),
.B = (uint8_t)((uint16_t)color->B * WS2812_BRIGHTNESS / 255),
};
return out;
}
/*
* Моргание красным на втором WS2812 при chargingError > 0.
* Логика как Slave-LB24 LED_Task: N вспышек = код ошибки, пауза 30×100 ms.
* Вызывается из LED_Task каждые 20 ms; шаг FSM — 100 ms.
*/
static void LED_Ws2812ErrorBlinkUpdate(void)
{
static uint8_t err_counter;
static uint8_t led_state;
static uint8_t led_pause;
static uint32_t blink_tick;
static uint32_t flash_until;
static CONN_Error_t last_error = CONN_NO_ERROR;
const CONN_Error_t err = CONN.chargingError;
const uint32_t now = HAL_GetTick();
if (err == CONN_NO_ERROR) {
err_counter = 0;
led_state = 0;
led_pause = 0;
flash_until = 0;
last_error = CONN_NO_ERROR;
ws2812_led1.R = 0;
ws2812_led1.G = 0;
ws2812_led1.B = 0;
return;
}
if (err != last_error) {
err_counter = 0;
led_state = 0;
led_pause = 0;
flash_until = 0;
last_error = err;
}
if (now < flash_until) {
ws2812_led1.R = 255;
ws2812_led1.G = 0;
ws2812_led1.B = 0;
return;
}
ws2812_led1.R = 0;
ws2812_led1.G = 0;
ws2812_led1.B = 0;
if ((now - blink_tick) < WS2812_ERROR_BLINK_MS) {
return;
}
blink_tick = now;
uint8_t led_flash = 0;
if (led_pause > 0) {
led_pause--;
} else if (err_counter < (uint8_t)err) {
if (led_state == 0) {
led_state = 1;
} else {
led_flash = 1;
led_state = 0;
err_counter++;
}
} else {
err_counter = 0;
led_pause = WS2812_ERROR_BLINK_PAUSE;
}
if (led_flash) {
flash_until = now + WS2812_ERROR_BLINK_MS;
ws2812_led1.R = 255;
ws2812_led1.G = 0;
ws2812_led1.B = 0;
}
}
void RGB_SetColor(RGB_t *color){
htim4.Instance->CCR2 = color->R * 100 / 255;
htim4.Instance->CCR3 = color->G * 100 / 255;
htim4.Instance->CCR4 = color->B * 100 / 255;
}
void LED_SetColor(RGB_Cycle_t *color){
void WS2812_SetColor(RGB_t *color){
RGB_t led0 = RGB_ScaleBrightness(color);
RGB_t led1 = RGB_ScaleBrightness(&ws2812_led1);
ws2812_update(&led0, &led1);
}
void LED_SetColor(const RGB_Cycle_t *color){
memcpy(&LED_Cycle, color, sizeof(RGB_Cycle_t));
}
@@ -178,38 +423,23 @@ void LED_Init(){
HAL_TIM_PWM_Start(&htim4, TIM_CHANNEL_3);
HAL_TIM_PWM_Start(&htim4, TIM_CHANNEL_4);
RGB_SetColor(&color);
WS2812_SetColor(&color);
}
// void LED_PhaseSync(uint8_t led_n){
// if(LED_State[led_n].phasesync){
// LED_State[led_n].phasesync = 0;
// //default settings
// LED_State[led_n].state = LED_HIGH;
// LED_State[led_n].tick = 0;
// //ищем среди всех светодиодов такую же последовательность
// for (uint8_t led_n1 = 0; led_n1 < 5; led_n1++){
// if ((LED_Cycle[led_n].Tf == LED_Cycle[led_n1].Tf) &&
// (LED_Cycle[led_n].Tr == LED_Cycle[led_n1].Tr) &&
// (LED_Cycle[led_n].Th == LED_Cycle[led_n1].Th) &&
// (LED_Cycle[led_n].Tl == LED_Cycle[led_n1].Tl) &&
// (led_n != led_n1)){
// //если нашли, то копируем фазу оттуда
// LED_State[led_n].state = LED_State[led_n1].state;
// LED_State[led_n].tick = LED_State[led_n1].tick;
// return;
// }
// }
// }
// }
void LED_Task(){
static uint32_t led_tick;
if((HAL_GetTick() - led_tick) > 20){
led_tick = HAL_GetTick();
LED_Ws2812ErrorBlinkUpdate();
if (lighting_init_active) {
LED_RenderInitShimmer();
RGB_SetColor(&LED_State.color);
WS2812_SetColor(&LED_State.color);
return;
}
LED_State.tick++;
// LED_PhaseSync(led_n);
switch(LED_State.state){
case LED_RISING:
interpolateColors(&LED_Cycle.Color2, &LED_Cycle.Color1, LED_State.tick, LED_Cycle.Tr, &LED_State.color);
@@ -247,5 +477,6 @@ void LED_Task(){
LED_State.state = LED_RISING;
}
RGB_SetColor(&LED_State.color);
WS2812_SetColor(&LED_State.color);
}
}
Core/Src/serial.c
+162 -66
View File
@@ -1,13 +1,16 @@
#include "serial.h"
#include "cp.h"
#include "connector.h"
#include "board.h"
#include "charger_config.h"
#include "connector.h"
#include "cp.h"
#include "debug.h"
#include "isr_opt.h"
#include "psu_control.h"
#include "power_setpoint_executor.h"
#include "serial_control.h"
#include <stdint.h>
#include <string.h>
#include "charger_config.h"
#include "psu_control.h"
extern UART_HandleTypeDef huart3;
extern uint8_t config_initialized;
@@ -27,13 +30,15 @@ CONN_Control_t last_cmd = CMD_NONE;
uint8_t ev_enable_output = 0;
#define CMD_INTERVAL 10
#define MAX_TX_BUFFER_SIZE 256
#define MAX_RX_BUFFER_SIZE 256
#define EVEREST_TIMEOUT_MS 5000u
#define EVEREST_TIMEOUT_WARN_MS 5000u
#define EVEREST_TIMEOUT_STOP_MS 10000u
#define UART3_REINIT_TIMEOUT_MS 1500u
static uint8_t rx_buffer[MAX_RX_BUFFER_SIZE];
static uint8_t tx_buffer[MAX_TX_BUFFER_SIZE];
static uint8_t tx_pending_buffer[MAX_TX_BUFFER_SIZE];
static uint16_t tx_pending_len = 0;
static uint8_t uart3_tx_busy = 0;
uint8_t ESTOP = 0;
uint8_t REPLUG = 0;
@@ -43,18 +48,19 @@ static uint8_t pwm_duty_percent = 100;
uint8_t isolation_enable = 0;
static uint32_t last_host_seen = 0;
static uint8_t everest_timed_out = 0;
static uint32_t last_everest_timeout_log_tick = 0;
static uint8_t everest_timeout_warn_latched = 0;
static uint8_t everest_timeout_stop_latched = 0;
static uint32_t uart3_last_packet_tick = 0;
static uint32_t uart3_last_reinit_tick = 0;
static CP_State_t cp_state_buffer = EV_STATE_ACQUIRING;
CCS_State_t CCS_State;
CCS_EvInfo_t CCS_EvInfo;
CONN_State_t CCS_EvseState;
CCS_ConnectorState_t CCS_ConnectorState = CCS_UNPLUGGED;
CCS_ConnectorState_t CCS_ConnectorState = CCS_UNKNOWN;
ISR_FAST static uint8_t process_received_packet(const uint8_t* packet, uint16_t packet_len);
static void CCS_UART3_Watchdog(void);
static void CCS_LogUart3Error(const char *tag);
ISR_FAST static void uart3_log_hal_error(uint8_t uart_num, uint32_t err) {
if (err == HAL_UART_ERROR_NONE) {
@@ -77,7 +83,7 @@ ISR_FAST static void uart3_log_hal_error(uint8_t uart_num, uint32_t err) {
}
ISR_FAST static void uart3_arm_rx_or_log(const char *where) {
HAL_StatusTypeDef st = HAL_UARTEx_ReceiveToIdle_IT(&huart3, rx_buffer, sizeof(rx_buffer));
HAL_StatusTypeDef st = HAL_UARTEx_ReceiveToIdle_DMA(&huart3, rx_buffer, sizeof(rx_buffer));
if (st == HAL_OK) {
return;
}
@@ -86,8 +92,9 @@ ISR_FAST static void uart3_arm_rx_or_log(const char *where) {
"UART3 RX arm failed (%s): HAL_Status=%d err_after=0x%08lx\n",
where, (int)st, (unsigned long)err_after);
uart3_log_hal_error(3u, err_after);
CCS_LogUart3Error("UART3 RX arm failed details");
if (err_after != HAL_UART_ERROR_NONE) {
(void)HAL_UART_Abort_IT(&huart3);
(void)HAL_UART_AbortReceive(&huart3);
}
}
@@ -124,35 +131,74 @@ ISR_FAST void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) {
"UART%u HAL error (ISR): raw=0x%08lx — RX may be corrupted until re-arm\n",
uart_num, (unsigned long)error);
uart3_log_hal_error(uart_num, error);
(void)HAL_UART_Abort_IT(huart);
(void)HAL_UART_AbortReceive(huart);
(void)HAL_UART_AbortTransmit(huart);
if (huart == &huart3) {
uart3_tx_busy = 0;
uart3_arm_rx_or_log("ErrorCallback");
} else {
SC_RecoverUartDma(huart);
}
}
void CCS_TxCpltCallback(UART_HandleTypeDef *huart) {
if (huart != &huart3) {
return;
}
uart3_tx_busy = 0;
if (tx_pending_len > 0) {
memcpy(tx_buffer, tx_pending_buffer, tx_pending_len);
uart3_tx_busy = 1;
if (HAL_UART_Transmit_DMA(&huart3, tx_buffer, tx_pending_len) != HAL_OK) {
uart3_tx_busy = 0;
CCS_LogUart3Error("UART3 TX DMA resend failed");
}
tx_pending_len = 0;
}
}
void CCS_SerialLoop(void) {
static uint32_t tick;
if ((int32_t)(HAL_GetTick() - tick) < 1) return;
tick = HAL_GetTick();
static uint32_t replug_tick = 0;
static uint32_t replug_watchdog_tick = 0;
static uint32_t replug_watchdog1_tick = 0;
static uint32_t last_state_sent = 0;
if ((&huart3)->RxState == HAL_UART_STATE_READY) {
uart3_arm_rx_or_log("SerialLoop");
}
static uint32_t force_unlock_tick = 0;
static uint32_t stop_tick = 0;
CCS_UART3_Watchdog();
/* Read CP once per loop and use buffered value below. */
cp_state_buffer = CP_GetState();
if (CONN.connControl != CMD_NONE) {
last_cmd = CONN.connControl;
}
if((HAL_GetTick() - last_cmd_sent) > CMD_INTERVAL){
if ((HAL_GetTick() - last_state_sent) >= 200) {
if (CONN.connControl == CMD_FORCE_UNLOCK) {
if (force_unlock_tick == 0) {
force_unlock_tick = HAL_GetTick();
} else if ((int32_t)(HAL_GetTick() - force_unlock_tick) >= 10000) {
CONN.connControl = CMD_NONE;
force_unlock_tick = 0;
}
} else {
force_unlock_tick = 0;
}
if (CONN.connControl == CMD_STOP) {
if (stop_tick == 0) {
stop_tick = HAL_GetTick();
} else if ((int32_t)(HAL_GetTick() - stop_tick) >= 1000) {
CONN.connControl = CMD_NONE;
stop_tick = 0;
}
} else {
stop_tick = 0;
}
if((int32_t)(HAL_GetTick() - last_cmd_sent) > (int32_t)CMD_INTERVAL){
if ((int32_t)(HAL_GetTick() - last_state_sent) >= 200) {
send_state();
last_state_sent = HAL_GetTick();
}
@@ -164,15 +210,19 @@ void CCS_SerialLoop(void) {
}
if (((CONN.connControl == CMD_STOP) ||
(CONN.connControl == CMD_FORCE_UNLOCK) ||
(CONN.chargingError != CONN_NO_ERROR)) &&
((HAL_GetTick() - last_stop_sent) > 1000)) {
((int32_t)(HAL_GetTick() - last_stop_sent) > 1000)) {
last_stop_sent = HAL_GetTick();
log_printf(LOG_WARN, "Stopping charging...\n");
if (CONN.connControl == CMD_FORCE_UNLOCK) {
CP_SetDuty(100);
}
CCS_SendEmergencyStop();
}
if (((CCS_EvseState == FinishedEV) || (CCS_EvseState == FinishedEVSE)) &&
((HAL_GetTick() - last_stop_sent) > 1000)) {
((int32_t)(HAL_GetTick() - last_stop_sent) > 1000)) {
last_stop_sent = HAL_GetTick();
log_printf(LOG_WARN, "FinishedEV, stopping...\n");
CCS_SendEmergencyStop();
@@ -182,16 +232,38 @@ void CCS_SerialLoop(void) {
(void)replug_watchdog_tick;
(void)replug_watchdog1_tick;
if (!config_initialized) {
// Keep connector in Unknown until host sends valid SET_CONFIG.
RELAY_Write(RELAY_CP, 1);
CONN_SetState(Unknown);
} else {
uint8_t host_timeout_warn = (last_host_seen > 0u) && ((int32_t)(HAL_GetTick() - last_host_seen) > (int32_t)EVEREST_TIMEOUT_WARN_MS);
uint8_t host_timeout_stop = (last_host_seen > 0u) && ((int32_t)(HAL_GetTick() - last_host_seen) > (int32_t)EVEREST_TIMEOUT_STOP_MS);
uint8_t host_timed_out = host_timeout_stop;
if (host_timeout_warn && !everest_timeout_warn_latched) {
log_printf(LOG_ERR, "Everest timeout\n");
everest_timeout_warn_latched = 1;
}
if (host_timeout_stop && !everest_timeout_stop_latched) {
log_printf(LOG_ERR, "Everest timeout, stopping charging...\n");
everest_timeout_stop_latched = 1;
}
if (!host_timeout_warn) {
everest_timeout_warn_latched = 0;
everest_timeout_stop_latched = 0;
}
everest_timed_out = host_timeout_stop;
switch(CCS_ConnectorState){
case CCS_UNKNOWN:
RELAY_Write(RELAY_CP, 0);
CONN_SetState(Unknown);
if (config_initialized && !host_timed_out) {
CCS_ConnectorState = CCS_UNPLUGGED;
}
break;
case CCS_DISABLED:
RELAY_Write(RELAY_CP, 0);
CONN_SetState(Disabled);
if (CONN.chargingError == CONN_NO_ERROR){
if ((CONN.chargingError == CONN_NO_ERROR) && !host_timed_out){
CCS_ConnectorState = CCS_UNPLUGGED;
}
break;
@@ -221,7 +293,7 @@ void CCS_SerialLoop(void) {
break;
case CCS_CONNECTED:
RELAY_Write(RELAY_CP, 1);
if(CCS_EvseState < Preparing) {
if((CCS_EvseState < Preparing) || (CCS_EvseState == AuthRequired)) {
CONN_SetState(Preparing);
} else {
CONN_SetState(CCS_EvseState);
@@ -238,7 +310,7 @@ void CCS_SerialLoop(void) {
case CCS_REPLUGGING:
RELAY_Write(RELAY_CP, 0);
CONN_SetState(Replugging);
if((HAL_GetTick() - replug_tick) > 1000){
if((int32_t)(HAL_GetTick() - replug_tick) > 1000){
replug_tick = HAL_GetTick();
if(REPLUG > 0){
if (REPLUG != 0xFF) REPLUG--;
@@ -256,28 +328,20 @@ void CCS_SerialLoop(void) {
}
break;
}
}
// If Everest timeout happened, keep safe-state and limit log frequency.
// The safe-state must remain until we receive a valid packet from the host.
if (everest_timed_out) {
if (last_everest_timeout_log_tick == 0 ||
(HAL_GetTick() - last_everest_timeout_log_tick) >= EVEREST_TIMEOUT_MS) {
log_printf(LOG_ERR, "Everest timeout\n");
last_everest_timeout_log_tick = HAL_GetTick();
}
CONN.EnableOutput = 0;
CCS_EvseState = Unknown;
CP_SetDuty(100);
} else if (last_host_seen > 0 && (HAL_GetTick() - last_host_seen) > EVEREST_TIMEOUT_MS) {
log_printf(LOG_ERR, "Everest timeout\n");
everest_timed_out = 1;
last_host_seen = HAL_GetTick(); // reset after the first timeout
last_everest_timeout_log_tick = HAL_GetTick();
// 10s timeout: enforce safe-state until host communication recovers.
{
static uint8_t prev_enable_output = 0xFFu;
uint8_t new_enable_output;
if (host_timeout_stop) {
CONN.EnableOutput = 0;
CCS_EvseState = Unknown;
CP_SetDuty(100);
if (CCS_ConnectorState != CCS_DISABLED && CCS_ConnectorState != CCS_UNKNOWN) {
CCS_ConnectorState = CCS_DISABLED;
}
new_enable_output = 0u;
} else {
if (last_cmd == CMD_STOP) {
CONN.EnableOutput = 0;
@@ -287,6 +351,20 @@ void CCS_SerialLoop(void) {
CONN.EnableOutput = 0;
}
}
new_enable_output = CONN.EnableOutput;
}
if (prev_enable_output != 0xFFu && prev_enable_output != new_enable_output) {
log_printf(LOG_INFO,
"EnableOutput %u->%u ev=%u stop=%u host_to=%u err=%u\n",
(unsigned)prev_enable_output,
(unsigned)new_enable_output,
(unsigned)ev_enable_output,
(unsigned)(last_cmd == CMD_STOP),
(unsigned)host_timeout_stop,
(unsigned)CONN.chargingError);
}
prev_enable_output = new_enable_output;
}
if ((cp_state_buffer == EV_STATE_B_CONN_PREP) ||
@@ -308,6 +386,7 @@ void CCS_Init(void){
CCS_MaxLoad.maxPower = PSU_MAX_POWER; //30000W
uart3_last_packet_tick = HAL_GetTick();
uart3_last_reinit_tick = uart3_last_packet_tick;
uart3_arm_rx_or_log("Init");
CCS_SendResetReason();
log_printf(LOG_INFO, "CCS init\n");
}
@@ -346,7 +425,16 @@ static uint16_t CCS_BuildPacket(uint8_t cmd, const void* payload, uint16_t paylo
static void CCS_SendPacket(uint8_t cmd, const void* payload, uint16_t payload_len) {
uint16_t len = CCS_BuildPacket(cmd, payload, payload_len, tx_buffer, sizeof(tx_buffer));
if (len > 0) {
HAL_UART_Transmit_IT(&huart3, tx_buffer, len);
if (uart3_tx_busy) {
memcpy(tx_pending_buffer, tx_buffer, len);
tx_pending_len = len;
} else {
uart3_tx_busy = 1;
if (HAL_UART_Transmit_DMA(&huart3, tx_buffer, len) != HAL_OK) {
uart3_tx_busy = 0;
CCS_LogUart3Error("UART3 TX DMA start failed");
}
}
}
last_cmd_sent = HAL_GetTick();
}
@@ -384,7 +472,6 @@ static void send_state(void) {
CCS_State.DutyCycle = CP_GetDuty();
CCS_State.OutputEnabled = PSU0.CONT_enabled;
CCS_State.MeasuredVoltage = (uint16_t)CONN.MeasuredVoltage;
if (CONN.RequestedVoltage == 500) CCS_State.MeasuredVoltage = 500; // fake
CCS_State.MeasuredCurrent = (uint16_t)CONN.MeasuredCurrent;
CCS_State.Power = CCS_Power;
CCS_State.Energy = CCS_Energy;
@@ -426,14 +513,17 @@ ISR_FAST static void apply_command(uint8_t cmd, const uint8_t* payload, uint16_t
(void)payload_len;
last_host_seen = HAL_GetTick();
everest_timed_out = 0;
last_everest_timeout_log_tick = 0;
everest_timeout_warn_latched = 0;
everest_timeout_stop_latched = 0;
switch (cmd) {
case CMD_E2M_PWM_DUTY: {
const e2m_pwm_duty_t* p = (const e2m_pwm_duty_t*)payload;
uint8_t duty = p->pwm_duty_percent;
if (duty > 100) duty = 100;
pwm_duty_percent = duty;
if (CONN.connControl != CMD_FORCE_UNLOCK) {
CP_SetDuty(duty);
}
break;
}
case CMD_E2M_ENABLE_OUTPUT: {
@@ -461,6 +551,7 @@ ISR_FAST static void apply_command(uint8_t cmd, const uint8_t* payload, uint16_t
const e2m_set_output_t* p = (const e2m_set_output_t*)payload;
CONN.RequestedVoltage = p->voltage_V;
CONN.WantedCurrent = p->current_0p1A;
PowerSetpoint_OnCommand(p->voltage_V, p->current_0p1A);
break;
}
case CMD_E2M_ISOLATION_CONTROL: {
@@ -548,19 +639,24 @@ ISR_FAST static uint8_t process_received_packet(const uint8_t* packet, uint16_t
}
static void CCS_UART3_Watchdog(void) {
const uint32_t now = HAL_GetTick();
const uint32_t since_last_packet = now - uart3_last_packet_tick;
const int32_t since_last_packet = (int32_t)(HAL_GetTick() - uart3_last_packet_tick);
const int32_t since_last_reinit = (int32_t)(HAL_GetTick() - uart3_last_reinit_tick);
if ((since_last_packet >= UART3_REINIT_TIMEOUT_MS) &&
((now - uart3_last_reinit_tick) >= UART3_REINIT_TIMEOUT_MS)) {
(void)HAL_UART_Abort_IT(&huart3);
(void)HAL_UART_DeInit(&huart3);
(void)HAL_UART_Init(&huart3);
(void)HAL_UARTEx_ReceiveToIdle_IT(&huart3, rx_buffer, sizeof(rx_buffer));
log_printf(LOG_ERR,
"UART3 RX recover: stalled (no RxEvent data for %ums), hard reinit\n",
(unsigned)UART3_REINIT_TIMEOUT_MS);
uart3_last_reinit_tick = now;
if ((since_last_packet >= (int32_t)UART3_REINIT_TIMEOUT_MS) &&
(since_last_reinit >= (int32_t)UART3_REINIT_TIMEOUT_MS) &&
(huart3.RxState == HAL_UART_STATE_READY)) {
uart3_arm_rx_or_log("Watchdog");
CCS_LogUart3Error("UART3 watchdog rearm");
uart3_last_reinit_tick = HAL_GetTick();
}
}
static void CCS_LogUart3Error(const char *tag) {
log_printf(LOG_ERR, "%s: err=0x%08lx g=%lu rx=%lu tx_busy=%u\n",
tag,
(unsigned long)HAL_UART_GetError(&huart3),
(unsigned long)huart3.gState,
(unsigned long)huart3.RxState,
(unsigned)uart3_tx_busy);
}
Core/Src/serial_control.c
+92 -69
View File
@@ -1,9 +1,10 @@
#include "serial_control.h"
#include "usart.h"
#include "board.h"
#include "serial.h"
#include "debug.h"
#include "isr_opt.h"
#include "serial.h"
#include "usart.h"
// Приватные функции
ISR_FAST static uint32_t calculate_crc32(const uint8_t* data, uint16_t length);
@@ -11,6 +12,9 @@ ISR_FAST static uint16_t encode_packet(const uint8_t* payload, uint16_t payload_
ISR_FAST static uint8_t parse_packet(const uint8_t* packet_data, uint16_t packet_len, ReceivedCommand_t* out_cmd);
ISR_FAST static uint8_t process_received_packet(SerialControl_t *ctx, const uint8_t* packet_data, uint16_t packet_len);
static void SC_UART2_Watchdog(void);
static void SC_ArmUart2RxDma(void);
static void SC_ArmUart5RxDma(void);
static void SC_LogUartError(const char *tag, UART_HandleTypeDef *huart);
uint8_t test_crc_invalid = 0;
@@ -20,11 +24,9 @@ static SerialControl_t serial_iso;
volatile SC_Source_t g_sc_command_source = SC_SOURCE_UART2;
static volatile uint8_t sc_uart2_timed_out = 0;
static uint32_t sc_uart2_last_packet_tick = 0;
static uint32_t sc_uart2_last_reinit_tick = 0;
/** Событие приёма по UART2 при активной передаче (см. HAL_UARTEx_RxEventCallback / SC_UART2_Watchdog). */
static volatile uint8_t sc_uart2_rx_during_tx = 0;
static uint32_t sc_uart2_last_recover_tick = 0;
#define SC_UART2_REINIT_TIMEOUT_MS 500u
#define SC_UART2_RECOVER_GUARD_MS 200u
#define SC_UART2_PACKET_TIMEOUT_MS 5000u
StatusPacket_t statusPacket = {
@@ -85,34 +87,26 @@ void SC_Init() {
memset(&serial_iso, 0, sizeof(serial_iso));
sc_uart2_timed_out = 0;
sc_uart2_last_packet_tick = HAL_GetTick();
sc_uart2_last_reinit_tick = sc_uart2_last_packet_tick;
sc_uart2_rx_during_tx = 0;
sc_uart2_last_recover_tick = sc_uart2_last_packet_tick;
SC_ArmUart2RxDma();
SC_ArmUart5RxDma();
}
void SC_Task() {
static uint32_t tick;
if ((int32_t)(HAL_GetTick() - tick) < 1) return;
tick = HAL_GetTick();
SC_UART2_Watchdog();
// Запуск приема в режиме прерывания с ожиданием idle
if ((huart2.RxState == HAL_UART_STATE_READY) && (serial_control.command_ready == 0)) {
if ((HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1) != HAL_OK) &&
(HAL_UART_GetError(&huart2) != HAL_UART_ERROR_NONE)) {
(void)HAL_UART_Abort_IT(&huart2);
}
}
if (huart5.RxState == HAL_UART_STATE_READY) {
if ((HAL_UARTEx_ReceiveToIdle_IT(&huart5, serial_iso.rx_buffer, MAX_RX_BUFFER_SIZE - 1) != HAL_OK) &&
(HAL_UART_GetError(&huart5) != HAL_UART_ERROR_NONE)) {
(void)HAL_UART_Abort_IT(&huart5);
}
}
// Запуск приема в режиме DMA + idle
SC_ArmUart2RxDma();
SC_ArmUart5RxDma();
// Проверка таймаута отправки пакета (больше 100 мс)
if (huart2.gState == HAL_UART_STATE_BUSY_TX && serial_control.tx_tick != 0) {
if ((HAL_GetTick() - serial_control.tx_tick) > 100) {
if ((int32_t)(HAL_GetTick() - serial_control.tx_tick) > 100) {
// Таймаут: принудительно сбрасываем передачу
HAL_UART_Abort_IT(&huart2);
// Выключаем DIR при сбросе передачи
HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
(void)HAL_UART_AbortTransmit(&huart2);
serial_control.tx_tick = 0; // Сбрасываем tick
}
}
@@ -120,34 +114,37 @@ void SC_Task() {
// Проверка наличия принятой команды для обработки
if (serial_control.command_ready && (huart2.gState != HAL_UART_STATE_BUSY_TX)) {
// HAL_Delay(2);
SC_CommandHandler(&serial_control.received_command);
if ((HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1) != HAL_OK) &&
(HAL_UART_GetError(&huart2) != HAL_UART_ERROR_NONE)) {
(void)HAL_UART_Abort_IT(&huart2);
}
SC_CommandHandler((ReceivedCommand_t*)&serial_control.received_command);
serial_control.command_ready = 0; // Сбрасываем флаг
SC_ArmUart2RxDma();
}
}
ISR_FAST void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) {
if (huart->Instance == huart2.Instance) {
if (huart2.gState == HAL_UART_STATE_BUSY_TX) {
sc_uart2_rx_during_tx = 1u;
if (Size == 0u) {
log_printf(LOG_WARN, "UART2 RX idle event with zero size\n");
}
sc_uart2_last_packet_tick = HAL_GetTick();
sc_uart2_last_reinit_tick = sc_uart2_last_packet_tick;
sc_uart2_last_recover_tick = sc_uart2_last_packet_tick;
sc_uart2_timed_out = 0;
if(!process_received_packet(&serial_control, serial_control.rx_buffer, Size)){
log_printf(LOG_WARN, "UART2 RX invalid packet len=%u\n", (unsigned)Size);
SC_SendPacket(NULL, 0, RESP_INVALID);
}
g_sc_command_source = SC_SOURCE_UART2;
HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
SC_ArmUart2RxDma();
} else if (huart->Instance == huart5.Instance) {
if (Size == 0u) {
log_printf(LOG_WARN, "UART5 RX idle event with zero size\n");
}
if (process_received_packet(&serial_iso, serial_iso.rx_buffer, Size)) {
g_sc_command_source = SC_SOURCE_UART5;
SC_CommandHandler((ReceivedCommand_t*)&serial_iso.received_command);
} else {
log_printf(LOG_WARN, "UART5 RX invalid packet len=%u\n", (unsigned)Size);
}
HAL_UARTEx_ReceiveToIdle_IT(&huart5, serial_iso.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
SC_ArmUart5RxDma();
} else if (huart->Instance == huart3.Instance) {
CCS_RxEventCallback(huart, Size);
}
@@ -155,8 +152,9 @@ ISR_FAST void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Siz
ISR_FAST void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) {
if (huart->Instance == huart2.Instance) {
HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
serial_control.tx_tick = 0;
} else if (huart->Instance == huart3.Instance) {
CCS_TxCpltCallback(huart);
}
}
@@ -217,16 +215,14 @@ ISR_FAST void SC_SendPacket(const uint8_t* payload, uint16_t payload_len, uint8_
uint16_t packet_len = encode_packet(payload, payload_len, serial_control.tx_buffer, response_code);
if (packet_len > 0) {
if (huart2.gState == HAL_UART_STATE_BUSY_TX) {
HAL_UART_Abort_IT(&huart2);
HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
if (huart2.gState != HAL_UART_STATE_READY) {
(void)HAL_UART_AbortTransmit(&huart2);
log_printf(LOG_WARN, "UART2 TX busy, abort transmit before resend\n");
}
if (HAL_UART_Transmit_DMA(&huart2, serial_control.tx_buffer, packet_len) != HAL_OK) {
SC_LogUartError("UART2 TX DMA start failed", &huart2);
return;
}
HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_SET);
sc_uart2_rx_during_tx = 0u;
HAL_UART_Transmit_IT(&huart2, serial_control.tx_buffer, packet_len);
serial_control.tx_tick = HAL_GetTick();
}
@@ -276,39 +272,66 @@ ISR_FAST static uint8_t process_received_packet(SerialControl_t *ctx, const uint
static void SC_UART2_Watchdog(void) {
const uint32_t now = HAL_GetTick();
const uint32_t since_last_packet = now - sc_uart2_last_packet_tick;
const int32_t since_last_packet = (int32_t)(now - sc_uart2_last_packet_tick);
if ((huart2.gState == HAL_UART_STATE_BUSY_TX) && (sc_uart2_rx_during_tx != 0u)) {
HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
(void)HAL_UART_Abort_IT(&huart2);
(void)HAL_UART_DeInit(&huart2);
(void)HAL_UART_Init(&huart2);
(void)HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
serial_control.tx_tick = 0;
sc_uart2_rx_during_tx = 0u;
sc_uart2_last_reinit_tick = now;
log_printf(LOG_ERR, "USART2 BUSY_TX: hard reinit\n");
return;
}
if (since_last_packet >= SC_UART2_PACKET_TIMEOUT_MS) {
if (since_last_packet >= (int32_t)SC_UART2_PACKET_TIMEOUT_MS) {
if (sc_uart2_timed_out == 0u) {
serial_control.command_ready = 0;
log_printf(LOG_WARN, "UART2 RX packet timeout (%u ms)\n", (unsigned)SC_UART2_PACKET_TIMEOUT_MS);
}
sc_uart2_timed_out = 1;
} else {
sc_uart2_timed_out = 0;
}
if ((since_last_packet >= SC_UART2_REINIT_TIMEOUT_MS) &&
((now - sc_uart2_last_reinit_tick) >= SC_UART2_REINIT_TIMEOUT_MS)) {
HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
(void)HAL_UART_Abort_IT(&huart2);
(void)HAL_UART_DeInit(&huart2);
(void)HAL_UART_Init(&huart2);
(void)HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
sc_uart2_last_reinit_tick = now;
log_printf(LOG_ERR, "USART2 stalled: hard reinit\n");
if ((huart2.RxState == HAL_UART_STATE_READY) &&
((int32_t)(now - sc_uart2_last_recover_tick) >= (int32_t)SC_UART2_RECOVER_GUARD_MS)) {
SC_ArmUart2RxDma();
sc_uart2_last_recover_tick = now;
}
}
static void SC_ArmUart2RxDma(void) {
if ((huart2.RxState == HAL_UART_STATE_READY) && (serial_control.command_ready == 0)) {
if (HAL_UARTEx_ReceiveToIdle_DMA(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1) != HAL_OK) {
SC_LogUartError("UART2 RX DMA arm failed", &huart2);
}
}
}
static void SC_ArmUart5RxDma(void) {
if (huart5.RxState == HAL_UART_STATE_READY) {
if (HAL_UARTEx_ReceiveToIdle_IT(&huart5, serial_iso.rx_buffer, MAX_RX_BUFFER_SIZE - 1) == HAL_OK) {
return;
}
SC_LogUartError("UART5 RX IT arm failed", &huart5);
}
}
void SC_RecoverUartDma(UART_HandleTypeDef *huart) {
if (huart == &huart2) {
SC_LogUartError("UART2 recover start", &huart2);
(void)HAL_UART_AbortReceive(&huart2);
(void)HAL_UART_AbortTransmit(&huart2);
serial_control.tx_tick = 0;
SC_ArmUart2RxDma();
sc_uart2_last_recover_tick = HAL_GetTick();
} else if (huart == &huart5) {
SC_LogUartError("UART5 recover start", &huart5);
(void)HAL_UART_AbortReceive(&huart5);
SC_ArmUart5RxDma();
}
}
static void SC_LogUartError(const char *tag, UART_HandleTypeDef *huart) {
if (tag == NULL || huart == NULL) {
return;
}
log_printf(LOG_ERR, "%s: instance=0x%08lx err=0x%08lx g=%lu rx=%lu\n",
tag,
(unsigned long)huart->Instance,
(unsigned long)HAL_UART_GetError(huart),
(unsigned long)huart->gState,
(unsigned long)huart->RxState);
}
Core/Src/serial_handler.c
+23 -9
View File
@@ -1,14 +1,16 @@
#include "serial_control.h"
#include "usart.h"
#include "charger_control.h"
#include "board.h"
#include "psu_control.h"
#include "charger_control.h"
#include "debug.h"
#include "fire_alarm.h"
#include "psu_control.h"
#include "rgb_controller.h"
#include "usart.h"
#include <string.h>
#ifdef USE_WEB_INTERFACE
extern volatile SC_Source_t g_sc_command_source;
static void monitoring_data_callback(void);
IsolationStatusPacket_t ISO = {
.isolationResistance = 0xFFFF
@@ -57,6 +59,14 @@ void SC_CommandHandler(ReceivedCommand_t* cmd) {
}
response_code = RESP_FAILED;
break;
case CMD_SET_LIGHTING:
if (cmd->argument_length == sizeof(LightingConfigPacket_t) &&
LED_ApplyLightingConfig((const LightingConfigPacket_t *)cmd->argument)) {
response_code = RESP_SUCCESS;
break;
}
response_code = RESP_FAILED;
break;
case CMD_SET_POWER_LIMIT:
if (cmd->argument_length == 1) {
PSU0.power_limit = ((uint8_t*)cmd->argument)[0] * 1000;
@@ -86,6 +96,10 @@ void SC_CommandHandler(ReceivedCommand_t* cmd) {
// }
response_code = RESP_FAILED;
break;
case CMD_FIRE_ALARM:
FireAlarm_Activate();
response_code = RESP_SUCCESS;
break;
case CMD_DEVICE_RESET:
// 2. Отправляем SUCCESS (хост может успеть получить его перед ребутом)
SC_SendPacket(NULL, 0, RESP_SUCCESS);
@@ -122,7 +136,7 @@ void SC_CommandHandler(ReceivedCommand_t* cmd) {
// Колбэк для заполнения данных мониторинга
void monitoring_data_callback() {
static void monitoring_data_callback(void) {
// Информация о зарядной сессии
statusPacket.SOC = CONN.SOC;
@@ -134,8 +148,9 @@ void monitoring_data_callback() {
statusPacket.outputEnabled = CONN.outputEnabled;
statusPacket.chargingError = CONN.chargingError;
statusPacket.connState = CONN.connState;
statusPacket.chargingElapsedTimeMin = 0;
statusPacket.chargingElapsedTimeSec = 0;
CONN_GetElapsedForMonitoring(
&statusPacket.chargingElapsedTimeMin,
&statusPacket.chargingElapsedTimeSec);
statusPacket.estimatedRemainingChargingTime = 0;
// состояние зарядной станции
@@ -202,4 +217,3 @@ void monitoring_data_callback() {
}
#endif
Core/Src/soft_rtc.c
+2 -22
View File
@@ -1,11 +1,4 @@
/*
* rtc.c
*
* Created on: Jul 22, 2024
* Author: colorbass
*/
#include <soft_rtc.h>
#include "soft_rtc.h"
#include <stdint.h>
#include <time.h>
@@ -63,20 +56,7 @@ uint8_t getTimeReg(uint8_t reg_number){
}else{
return 0x00;
}
};
//int main() {
// uint32_t unix_time = 1672531199; // Example Unix timestamp
// uint8_t time[8];
//
// unix_to_bcd(unix_time, time);
//
// // Print the BCD values for verification
// for (int i = 0; i < 8; i++) {
// log_printf(LOG_INFO, "time[%d]: %02X\n", i, time[i]);
// }
//
// return 0;
//}
}
/**
* @brief Read the time counter available in RTC_CNT registers.
Core/Src/stm32f1xx_hal_msp.c
+1 -17
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f1xx_hal_msp.c
* @brief This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
Core/Src/stm32f1xx_it.c
+61 -16
View File
@@ -1,20 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f1xx_it.c
* @brief Interrupt Service Routines.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
@@ -63,6 +48,10 @@ extern ADC_HandleTypeDef hadc1;
extern CAN_HandleTypeDef hcan1;
extern CAN_HandleTypeDef hcan2;
extern TIM_HandleTypeDef htim3;
extern DMA_HandleTypeDef hdma_usart2_rx;
extern DMA_HandleTypeDef hdma_usart2_tx;
extern DMA_HandleTypeDef hdma_usart3_rx;
extern DMA_HandleTypeDef hdma_usart3_tx;
extern UART_HandleTypeDef huart5;
extern UART_HandleTypeDef huart1;
extern UART_HandleTypeDef huart2;
@@ -223,6 +212,62 @@ HAL_GPIO_WritePin(DBG4_GPIO_Port, DBG4_Pin, GPIO_PIN_RESET);
/* USER CODE END DMA1_Channel1_IRQn 1 */
}
/**
* @brief This function handles DMA1 channel2 global interrupt.
*/
void DMA1_Channel2_IRQHandler(void)
{
/* USER CODE BEGIN DMA1_Channel2_IRQn 0 */
/* USER CODE END DMA1_Channel2_IRQn 0 */
HAL_DMA_IRQHandler(&hdma_usart3_tx);
/* USER CODE BEGIN DMA1_Channel2_IRQn 1 */
/* USER CODE END DMA1_Channel2_IRQn 1 */
}
/**
* @brief This function handles DMA1 channel3 global interrupt.
*/
void DMA1_Channel3_IRQHandler(void)
{
/* USER CODE BEGIN DMA1_Channel3_IRQn 0 */
/* USER CODE END DMA1_Channel3_IRQn 0 */
HAL_DMA_IRQHandler(&hdma_usart3_rx);
/* USER CODE BEGIN DMA1_Channel3_IRQn 1 */
/* USER CODE END DMA1_Channel3_IRQn 1 */
}
/**
* @brief This function handles DMA1 channel6 global interrupt.
*/
void DMA1_Channel6_IRQHandler(void)
{
/* USER CODE BEGIN DMA1_Channel6_IRQn 0 */
/* USER CODE END DMA1_Channel6_IRQn 0 */
HAL_DMA_IRQHandler(&hdma_usart2_rx);
/* USER CODE BEGIN DMA1_Channel6_IRQn 1 */
/* USER CODE END DMA1_Channel6_IRQn 1 */
}
/**
* @brief This function handles DMA1 channel7 global interrupt.
*/
void DMA1_Channel7_IRQHandler(void)
{
/* USER CODE BEGIN DMA1_Channel7_IRQn 0 */
/* USER CODE END DMA1_Channel7_IRQn 0 */
HAL_DMA_IRQHandler(&hdma_usart2_tx);
/* USER CODE BEGIN DMA1_Channel7_IRQn 1 */
/* USER CODE END DMA1_Channel7_IRQn 1 */
}
/**
* @brief This function handles ADC1 and ADC2 global interrupts.
*/
Core/Src/tim.c
+2 -18
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file tim.c
* @brief This file provides code for the configuration
* of the TIM instances.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "tim.h"
@@ -166,7 +150,7 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
__HAL_RCC_TIM3_CLK_ENABLE();
/* TIM3 interrupt Init */
HAL_NVIC_SetPriority(TIM3_IRQn, 0, 0);
HAL_NVIC_SetPriority(TIM3_IRQn, 6, 0);
HAL_NVIC_EnableIRQ(TIM3_IRQn);
/* USER CODE BEGIN TIM3_MspInit 1 */
Core/Src/usart.c
+86 -24
View File
@@ -1,21 +1,5 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file usart.c
* @brief This file provides code for the configuration
* of the USART instances.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "usart.h"
@@ -28,6 +12,10 @@ UART_HandleTypeDef huart5;
UART_HandleTypeDef huart1;
UART_HandleTypeDef huart2;
UART_HandleTypeDef huart3;
DMA_HandleTypeDef hdma_usart2_rx;
DMA_HandleTypeDef hdma_usart2_tx;
DMA_HandleTypeDef hdma_usart3_rx;
DMA_HandleTypeDef hdma_usart3_tx;
/* UART5 init function */
void MX_UART5_Init(void)
@@ -163,10 +151,10 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
PC12 ------> UART5_TX
PD2 ------> UART5_RX
*/
GPIO_InitStruct.Pin = GPIO_PIN_12;
GPIO_InitStruct.Pin = HEATER_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
HAL_GPIO_Init(HEATER_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@@ -174,7 +162,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* UART5 interrupt Init */
HAL_NVIC_SetPriority(UART5_IRQn, 0, 0);
HAL_NVIC_SetPriority(UART5_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(UART5_IRQn);
/* USER CODE BEGIN UART5_MspInit 1 */
@@ -204,7 +192,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USART1 interrupt Init */
HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
HAL_NVIC_SetPriority(USART1_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(USART1_IRQn);
/* USER CODE BEGIN USART1_MspInit 1 */
@@ -235,8 +223,41 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
__HAL_AFIO_REMAP_USART2_ENABLE();
/* USART2 DMA Init */
/* USART2_RX Init */
hdma_usart2_rx.Instance = DMA1_Channel6;
hdma_usart2_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
hdma_usart2_rx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_usart2_rx.Init.MemInc = DMA_MINC_ENABLE;
hdma_usart2_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
hdma_usart2_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
hdma_usart2_rx.Init.Mode = DMA_NORMAL;
hdma_usart2_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
if (HAL_DMA_Init(&hdma_usart2_rx) != HAL_OK)
{
Error_Handler();
}
__HAL_LINKDMA(uartHandle,hdmarx,hdma_usart2_rx);
/* USART2_TX Init */
hdma_usart2_tx.Instance = DMA1_Channel7;
hdma_usart2_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
hdma_usart2_tx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_usart2_tx.Init.MemInc = DMA_MINC_ENABLE;
hdma_usart2_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
hdma_usart2_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
hdma_usart2_tx.Init.Mode = DMA_NORMAL;
hdma_usart2_tx.Init.Priority = DMA_PRIORITY_HIGH;
if (HAL_DMA_Init(&hdma_usart2_tx) != HAL_OK)
{
Error_Handler();
}
__HAL_LINKDMA(uartHandle,hdmatx,hdma_usart2_tx);
/* USART2 interrupt Init */
HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
HAL_NVIC_SetPriority(USART2_IRQn, 2, 0);
HAL_NVIC_EnableIRQ(USART2_IRQn);
/* USER CODE BEGIN USART2_MspInit 1 */
@@ -267,8 +288,41 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
__HAL_AFIO_REMAP_USART3_PARTIAL();
/* USART3 DMA Init */
/* USART3_RX Init */
hdma_usart3_rx.Instance = DMA1_Channel3;
hdma_usart3_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
hdma_usart3_rx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_usart3_rx.Init.MemInc = DMA_MINC_ENABLE;
hdma_usart3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
hdma_usart3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
hdma_usart3_rx.Init.Mode = DMA_NORMAL;
hdma_usart3_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
if (HAL_DMA_Init(&hdma_usart3_rx) != HAL_OK)
{
Error_Handler();
}
__HAL_LINKDMA(uartHandle,hdmarx,hdma_usart3_rx);
/* USART3_TX Init */
hdma_usart3_tx.Instance = DMA1_Channel2;
hdma_usart3_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
hdma_usart3_tx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_usart3_tx.Init.MemInc = DMA_MINC_ENABLE;
hdma_usart3_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
hdma_usart3_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
hdma_usart3_tx.Init.Mode = DMA_NORMAL;
hdma_usart3_tx.Init.Priority = DMA_PRIORITY_HIGH;
if (HAL_DMA_Init(&hdma_usart3_tx) != HAL_OK)
{
Error_Handler();
}
__HAL_LINKDMA(uartHandle,hdmatx,hdma_usart3_tx);
/* USART3 interrupt Init */
HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
HAL_NVIC_SetPriority(USART3_IRQn, 2, 0);
HAL_NVIC_EnableIRQ(USART3_IRQn);
/* USER CODE BEGIN USART3_MspInit 1 */
@@ -291,7 +345,7 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
PC12 ------> UART5_TX
PD2 ------> UART5_RX
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12);
HAL_GPIO_DeInit(HEATER_GPIO_Port, HEATER_Pin);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -335,6 +389,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
*/
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5|GPIO_PIN_6);
/* USART2 DMA DeInit */
HAL_DMA_DeInit(uartHandle->hdmarx);
HAL_DMA_DeInit(uartHandle->hdmatx);
/* USART2 interrupt Deinit */
HAL_NVIC_DisableIRQ(USART2_IRQn);
/* USER CODE BEGIN USART2_MspDeInit 1 */
@@ -355,6 +413,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
/* USART3 DMA DeInit */
HAL_DMA_DeInit(uartHandle->hdmarx);
HAL_DMA_DeInit(uartHandle->hdmatx);
/* USART3 interrupt Deinit */
HAL_NVIC_DisableIRQ(USART3_IRQn);
/* USER CODE BEGIN USART3_MspDeInit 1 */
Debug/.DS_Store
Vendored
BIN
View File
Binary file not shown.
Debug/CCSModuleSW30Web.bin
BIN
View File
Binary file not shown.
Debug/CCSModuleSW30Web.elf
Executable
BIN
View File
Binary file not shown.
Debug/CCSModuleSW30Web.hex
+4676
View File
File diff suppressed because it is too large Load Diff
Debug/CCSModuleSW30Web.list
-34762
View File
File diff suppressed because it is too large Load Diff
Debug/CCSModuleSW30Web.srec
+4328 -3575
View File
File diff suppressed because it is too large Load Diff
Debug/CCSModuleSW30Web — копия.bin
BIN
View File
Binary file not shown.
Debug/Core/.DS_Store
Vendored
BIN
View File
Binary file not shown.
Debug/Core/Src/adc.cyclo
-5
View File
@@ -1,5 +0,0 @@
../Core/Src/adc.c:29:6:ADC_ScanStart 2
../Core/Src/adc.c:37:15:HAL_ADC_ConvCpltCallback 2
../Core/Src/adc.c:59:6:MX_ADC1_Init 8
../Core/Src/adc.c:146:6:HAL_ADC_MspInit 3
../Core/Src/adc.c:200:6:HAL_ADC_MspDeInit 2
Debug/Core/Src/board.cyclo
-13
View File
@@ -1,13 +0,0 @@
../Core/Src/board.c:18:6:RELAY_Write 9
../Core/Src/board.c:51:9:RELAY_Read 1
../Core/Src/board.c:56:9:IN_ReadInput 8
../Core/Src/board.c:77:9:GetBoardTemp 1
../Core/Src/board.c:89:6:Init_Peripheral 1
../Core/Src/board.c:106:7:pt1000_to_temperature 1
../Core/Src/board.c:117:7:calculate_NTC_resistance 2
../Core/Src/board.c:132:9:CONN_ReadTemp 4
../Core/Src/board.c:152:9:GBT_ReadTemp 1
../Core/Src/board.c:156:6:ADC_Select_Channel 2
../Core/Src/board.c:167:9:ADC_TryLock 4
../Core/Src/board.c:183:6:ADC_LockBlocking 2
../Core/Src/board.c:189:6:ADC_Unlock 2
Debug/Core/Src/can.cyclo
-4
View File
@@ -1,4 +0,0 @@
../Core/Src/can.c:31:6:MX_CAN1_Init 2
../Core/Src/can.c:63:6:MX_CAN2_Init 2
../Core/Src/can.c:97:6:HAL_CAN_MspInit 5
../Core/Src/can.c:176:6:HAL_CAN_MspDeInit 5
Debug/Core/Src/charger_control.cyclo
-5
View File
@@ -1,5 +0,0 @@
../Core/Src/charger_control.c:12:6:CONN_Init 1
../Core/Src/charger_control.c:20:6:CONN_Loop 6
../Core/Src/charger_control.c:42:6:CONN_Task 6
../Core/Src/charger_control.c:58:6:CONN_SetState 16
../Core/Src/charger_control.c:84:6:CONN_PrintChargingTotal 1
Debug/Core/Src/connector.cyclo
-2
View File
@@ -1,2 +0,0 @@
../Core/Src/connector.c:12:6:CONN_Task 5
../Core/Src/connector.c:28:6:CONN_SetState 16
Debug/Core/Src/cp.cyclo
-7
View File
@@ -1,7 +0,0 @@
../Core/Src/cp.c:16:16:CP_ReadVoltageMv 1
../Core/Src/cp.c:33:6:CP_Init 1
../Core/Src/cp.c:50:6:CP_SetDuty 1
../Core/Src/cp.c:63:9:CP_GetDuty 1
../Core/Src/cp.c:67:9:CP_GetVoltage 1
../Core/Src/cp.c:72:12:CP_GetState 12
../Core/Src/cp.c:96:6:CP_Loop 1
Debug/Core/Src/crc.cyclo
-3
View File
@@ -1,3 +0,0 @@
../Core/Src/crc.c:30:6:MX_CRC_Init 2
../Core/Src/crc.c:51:6:HAL_CRC_MspInit 2
../Core/Src/crc.c:67:6:HAL_CRC_MspDeInit 2
Debug/Core/Src/debug.cyclo
-5
View File
@@ -1,5 +0,0 @@
../Core/Src/debug.c:42:5:_write 1
../Core/Src/debug.c:50:6:debug_buffer_add 3
../Core/Src/debug.c:70:10:debug_buffer_available 1
../Core/Src/debug.c:79:6:debug_buffer_send 5
../Core/Src/debug.c:119:5:log_printf 3
Debug/Core/Src/dma.cyclo
-1
View File
@@ -1 +0,0 @@
../Core/Src/dma.c:39:6:MX_DMA_Init 1
Debug/Core/Src/edcan_handler_user.cyclo
View File
Debug/Core/Src/gbt_control.cyclo
-3
View File
@@ -1,3 +0,0 @@
../Core/Src/gbt_control.c:10:6:GBT_SetConfig 1
../Core/Src/gbt_control.c:24:6:GBT_ControlRead 1
../Core/Src/gbt_control.c:33:6:GBT_ControlWrite 2
Debug/Core/Src/gpio.cyclo
-1
View File
@@ -1 +0,0 @@
../Core/Src/gpio.c:44:6:MX_GPIO_Init 1
Debug/Core/Src/main.cyclo
-8
View File
@@ -1,8 +0,0 @@
../Core/Src/main.c:65:13:VectorBase_Config 1
../Core/Src/main.c:76:9:ED_TraceWarning 3
../Core/Src/main.c:88:6:ED_Delay 3
../Core/Src/main.c:107:6:StopButtonControl 2
../Core/Src/main.c:118:13:CAN1_MinimalReInit 3
../Core/Src/main.c:136:5:main 1
../Core/Src/main.c:219:6:SystemClock_Config 4
../Core/Src/main.c:279:6:Error_Handler 1
Debug/Core/Src/meter.cyclo
-1
View File
@@ -1 +0,0 @@
../Core/Src/meter.c:17:6:METER_CalculateEnergy 3
Debug/Core/Src/psu_control.cyclo
-12
View File
@@ -1,12 +0,0 @@
../Core/Src/psu_control.c:34:13:PSU_SwitchState 1
../Core/Src/psu_control.c:39:17:PSU_StateTime 1
../Core/Src/psu_control.c:43:15:HAL_CAN_RxFifo1MsgPendingCallback 9
../Core/Src/psu_control.c:117:6:PSU_CAN_FilterInit 2
../Core/Src/psu_control.c:140:6:PSU_Init 1
../Core/Src/psu_control.c:157:6:PSU_Enable 3
../Core/Src/psu_control.c:169:6:PSU_SetHVMode 2
../Core/Src/psu_control.c:176:6:PSU_SetVoltageCurrent 5
../Core/Src/psu_control.c:203:6:PSU_SendCmd 4
../Core/Src/psu_control.c:239:10:max 2
../Core/Src/psu_control.c:244:6:PSU_ReadWrite 6
../Core/Src/psu_control.c:280:6:PSU_Task 41
Debug/Core/Src/rgb_controller.cyclo
-6
View File
@@ -1,6 +0,0 @@
../Core/Src/rgb_controller.c:92:6:LED_Write 16
../Core/Src/rgb_controller.c:146:6:interpolateColors 3
../Core/Src/rgb_controller.c:164:6:RGB_SetColor 1
../Core/Src/rgb_controller.c:170:6:LED_SetColor 1
../Core/Src/rgb_controller.c:175:6:LED_Init 1
../Core/Src/rgb_controller.c:207:6:LED_Task 10
Debug/Core/Src/rtc.cyclo
-3
View File
@@ -1,3 +0,0 @@
../Core/Src/rtc.c:14:6:MX_RTC_Init 2
../Core/Src/rtc.c:40:6:HAL_RTC_MspInit 2
../Core/Src/rtc.c:59:6:HAL_RTC_MspDeInit 2
Debug/Core/Src/serial.cyclo
-18
View File
@@ -1,18 +0,0 @@
../Core/Src/serial.c:59:22:uart3_log_hal_error 3
../Core/Src/serial.c:79:22:uart3_arm_rx_or_log 3
../Core/Src/serial.c:94:15:CCS_RxEventCallback 4
../Core/Src/serial.c:117:15:HAL_UART_ErrorCallback 5
../Core/Src/serial.c:135:6:CCS_SerialLoop 43
../Core/Src/serial.c:301:6:CCS_Init 1
../Core/Src/serial.c:315:26:crc16_ibm 3
../Core/Src/serial.c:330:17:CCS_BuildPacket 4
../Core/Src/serial.c:346:13:CCS_SendPacket 2
../Core/Src/serial.c:354:13:CCS_SendResetReason 1
../Core/Src/serial.c:358:6:CCS_SendEmergencyStop 1
../Core/Src/serial.c:362:6:CCS_SendStart 1
../Core/Src/serial.c:366:13:CCS_CalculateEnergy 2
../Core/Src/serial.c:381:13:send_state 3
../Core/Src/serial.c:409:26:expected_payload_len 2
../Core/Src/serial.c:425:22:apply_command 13
../Core/Src/serial.c:497:25:process_received_packet 8
../Core/Src/serial.c:550:13:CCS_UART3_Watchdog 3
Debug/Core/Src/serial_control.cyclo
-11
View File
@@ -1,11 +0,0 @@
../Core/Src/serial_control.c:70:6:ReadVersion 1
../Core/Src/serial_control.c:82:6:SC_Init 1
../Core/Src/serial_control.c:92:6:SC_Task 15
../Core/Src/serial_control.c:132:15:HAL_UARTEx_RxEventCallback 7
../Core/Src/serial_control.c:156:15:HAL_UART_TxCpltCallback 2
../Core/Src/serial_control.c:166:26:calculate_crc32 3
../Core/Src/serial_control.c:183:26:encode_packet 5
../Core/Src/serial_control.c:216:15:SC_SendPacket 3
../Core/Src/serial_control.c:235:25:parse_packet 3
../Core/Src/serial_control.c:268:25:process_received_packet 2
../Core/Src/serial_control.c:277:13:SC_UART2_Watchdog 7
Debug/Core/Src/serial_handler.cyclo
-3
View File
@@ -1,3 +0,0 @@
../Drivers/CMSIS/Include/core_cm3.h:1762:34:__NVIC_SystemReset 1
../Core/Src/serial_handler.c:26:6:SC_CommandHandler 19
../Core/Src/serial_handler.c:125:6:monitoring_data_callback 1
Debug/Core/Src/sma_filter.cyclo
-2
View File
@@ -1,2 +0,0 @@
../Core/Src/sma_filter.c:3:6:SMAFilter_Init 3
../Core/Src/sma_filter.c:16:9:SMAFilter_Update 6
Debug/Core/Src/soft_rtc.cyclo
-10
View File
@@ -1,10 +0,0 @@
../Core/Src/soft_rtc.c:22:10:get_Current_Time 1
../Core/Src/soft_rtc.c:26:6:set_Time 1
../Core/Src/soft_rtc.c:30:9:to_bcd 1
../Core/Src/soft_rtc.c:34:6:unix_to_bcd 1
../Core/Src/soft_rtc.c:48:6:writeTimeReg 2
../Core/Src/soft_rtc.c:53:9:getTimeReg 5
../Core/Src/soft_rtc.c:87:17:RTC1_ReadTimeCounter 2
../Core/Src/soft_rtc.c:119:26:RTC1_WriteTimeCounter 3
../Core/Src/soft_rtc.c:151:26:RTC1_EnterInitMode 3
../Core/Src/soft_rtc.c:178:26:RTC1_ExitInitMode 3
Debug/Core/Src/stm32f1xx_hal_msp.cyclo
-1
View File
@@ -1 +0,0 @@
../Core/Src/stm32f1xx_hal_msp.c:63:6:HAL_MspInit 1
Debug/Core/Src/stm32f1xx_it.cyclo
-19
View File
@@ -1,19 +0,0 @@
../Core/Src/stm32f1xx_it.c:80:6:NMI_Handler 1
../Core/Src/stm32f1xx_it.c:95:6:HardFault_Handler 1
../Core/Src/stm32f1xx_it.c:110:6:MemManage_Handler 1
../Core/Src/stm32f1xx_it.c:125:6:BusFault_Handler 1
../Core/Src/stm32f1xx_it.c:140:6:UsageFault_Handler 1
../Core/Src/stm32f1xx_it.c:155:6:SVC_Handler 1
../Core/Src/stm32f1xx_it.c:168:6:DebugMon_Handler 1
../Core/Src/stm32f1xx_it.c:181:6:PendSV_Handler 1
../Core/Src/stm32f1xx_it.c:194:6:SysTick_Handler 1
../Core/Src/stm32f1xx_it.c:215:6:DMA1_Channel1_IRQHandler 1
../Core/Src/stm32f1xx_it.c:229:6:ADC1_2_IRQHandler 1
../Core/Src/stm32f1xx_it.c:243:6:CAN1_RX0_IRQHandler 1
../Core/Src/stm32f1xx_it.c:257:6:TIM3_IRQHandler 1
../Core/Src/stm32f1xx_it.c:271:6:USART1_IRQHandler 1
../Core/Src/stm32f1xx_it.c:285:6:USART2_IRQHandler 1
../Core/Src/stm32f1xx_it.c:299:6:USART3_IRQHandler 1
../Core/Src/stm32f1xx_it.c:313:6:UART5_IRQHandler 1
../Core/Src/stm32f1xx_it.c:327:6:CAN2_TX_IRQHandler 1
../Core/Src/stm32f1xx_it.c:341:6:CAN2_RX1_IRQHandler 1
Debug/Core/Src/subdir.mk
-102
View File
@@ -1,102 +0,0 @@
################################################################################
# Automatically-generated file. Do not edit!
# Toolchain: GNU Tools for STM32 (13.3.rel1)
################################################################################
# Add inputs and outputs from these tool invocations to the build variables
C_SRCS += \
../Core/Src/adc.c \
../Core/Src/board.c \
../Core/Src/can.c \
../Core/Src/charger_control.c \
../Core/Src/cp.c \
../Core/Src/crc.c \
../Core/Src/debug.c \
../Core/Src/dma.c \
../Core/Src/gpio.c \
../Core/Src/main.c \
../Core/Src/meter.c \
../Core/Src/psu_control.c \
../Core/Src/rgb_controller.c \
../Core/Src/rtc.c \
../Core/Src/serial.c \
../Core/Src/serial_control.c \
../Core/Src/serial_handler.c \
../Core/Src/sma_filter.c \
../Core/Src/soft_rtc.c \
../Core/Src/stm32f1xx_hal_msp.c \
../Core/Src/stm32f1xx_it.c \
../Core/Src/syscalls.c \
../Core/Src/sysmem.c \
../Core/Src/system_stm32f1xx.c \
../Core/Src/tim.c \
../Core/Src/usart.c
C_DEPS += \
./Core/Src/adc.d \
./Core/Src/board.d \
./Core/Src/can.d \
./Core/Src/charger_control.d \
./Core/Src/cp.d \
./Core/Src/crc.d \
./Core/Src/debug.d \
./Core/Src/dma.d \
./Core/Src/gpio.d \
./Core/Src/main.d \
./Core/Src/meter.d \
./Core/Src/psu_control.d \
./Core/Src/rgb_controller.d \
./Core/Src/rtc.d \
./Core/Src/serial.d \
./Core/Src/serial_control.d \
./Core/Src/serial_handler.d \
./Core/Src/sma_filter.d \
./Core/Src/soft_rtc.d \
./Core/Src/stm32f1xx_hal_msp.d \
./Core/Src/stm32f1xx_it.d \
./Core/Src/syscalls.d \
./Core/Src/sysmem.d \
./Core/Src/system_stm32f1xx.d \
./Core/Src/tim.d \
./Core/Src/usart.d
OBJS += \
./Core/Src/adc.o \
./Core/Src/board.o \
./Core/Src/can.o \
./Core/Src/charger_control.o \
./Core/Src/cp.o \
./Core/Src/crc.o \
./Core/Src/debug.o \
./Core/Src/dma.o \
./Core/Src/gpio.o \
./Core/Src/main.o \
./Core/Src/meter.o \
./Core/Src/psu_control.o \
./Core/Src/rgb_controller.o \
./Core/Src/rtc.o \
./Core/Src/serial.o \
./Core/Src/serial_control.o \
./Core/Src/serial_handler.o \
./Core/Src/sma_filter.o \
./Core/Src/soft_rtc.o \
./Core/Src/stm32f1xx_hal_msp.o \
./Core/Src/stm32f1xx_it.o \
./Core/Src/syscalls.o \
./Core/Src/sysmem.o \
./Core/Src/system_stm32f1xx.o \
./Core/Src/tim.o \
./Core/Src/usart.o
# Each subdirectory must supply rules for building sources it contributes
Core/Src/%.o Core/Src/%.su Core/Src/%.cyclo: ../Core/Src/%.c Core/Src/subdir.mk
arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DDEBUG -DUSE_HAL_DRIVER -DSTM32F107xC -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
clean: clean-Core-2f-Src
clean-Core-2f-Src:
-$(RM) ./Core/Src/adc.cyclo ./Core/Src/adc.d ./Core/Src/adc.o ./Core/Src/adc.su ./Core/Src/board.cyclo ./Core/Src/board.d ./Core/Src/board.o ./Core/Src/board.su ./Core/Src/can.cyclo ./Core/Src/can.d ./Core/Src/can.o ./Core/Src/can.su ./Core/Src/charger_control.cyclo ./Core/Src/charger_control.d ./Core/Src/charger_control.o ./Core/Src/charger_control.su ./Core/Src/cp.cyclo ./Core/Src/cp.d ./Core/Src/cp.o ./Core/Src/cp.su ./Core/Src/crc.cyclo ./Core/Src/crc.d ./Core/Src/crc.o ./Core/Src/crc.su ./Core/Src/debug.cyclo ./Core/Src/debug.d ./Core/Src/debug.o ./Core/Src/debug.su ./Core/Src/dma.cyclo ./Core/Src/dma.d ./Core/Src/dma.o ./Core/Src/dma.su ./Core/Src/gpio.cyclo ./Core/Src/gpio.d ./Core/Src/gpio.o ./Core/Src/gpio.su ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/meter.cyclo ./Core/Src/meter.d ./Core/Src/meter.o ./Core/Src/meter.su ./Core/Src/psu_control.cyclo ./Core/Src/psu_control.d ./Core/Src/psu_control.o ./Core/Src/psu_control.su ./Core/Src/rgb_controller.cyclo ./Core/Src/rgb_controller.d ./Core/Src/rgb_controller.o ./Core/Src/rgb_controller.su ./Core/Src/rtc.cyclo ./Core/Src/rtc.d ./Core/Src/rtc.o ./Core/Src/rtc.su ./Core/Src/serial.cyclo ./Core/Src/serial.d ./Core/Src/serial.o ./Core/Src/serial.su ./Core/Src/serial_control.cyclo ./Core/Src/serial_control.d ./Core/Src/serial_control.o ./Core/Src/serial_control.su ./Core/Src/serial_handler.cyclo ./Core/Src/serial_handler.d ./Core/Src/serial_handler.o ./Core/Src/serial_handler.su ./Core/Src/sma_filter.cyclo ./Core/Src/sma_filter.d ./Core/Src/sma_filter.o ./Core/Src/sma_filter.su ./Core/Src/soft_rtc.cyclo ./Core/Src/soft_rtc.d ./Core/Src/soft_rtc.o ./Core/Src/soft_rtc.su ./Core/Src/stm32f1xx_hal_msp.cyclo ./Core/Src/stm32f1xx_hal_msp.d ./Core/Src/stm32f1xx_hal_msp.o ./Core/Src/stm32f1xx_hal_msp.su ./Core/Src/stm32f1xx_it.cyclo ./Core/Src/stm32f1xx_it.d ./Core/Src/stm32f1xx_it.o ./Core/Src/stm32f1xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32f1xx.cyclo ./Core/Src/system_stm32f1xx.d ./Core/Src/system_stm32f1xx.o ./Core/Src/system_stm32f1xx.su ./Core/Src/tim.cyclo ./Core/Src/tim.d ./Core/Src/tim.o ./Core/Src/tim.su ./Core/Src/usart.cyclo ./Core/Src/usart.d ./Core/Src/usart.o ./Core/Src/usart.su
.PHONY: clean-Core-2f-Src
Debug/Core/Src/syscalls.cyclo
-18
View File
@@ -1,18 +0,0 @@
../Core/Src/syscalls.c:44:6:initialise_monitor_handles 1
../Core/Src/syscalls.c:48:5:_getpid 1
../Core/Src/syscalls.c:53:5:_kill 1
../Core/Src/syscalls.c:61:6:_exit 1
../Core/Src/syscalls.c:67:27:_read 2
../Core/Src/syscalls.c:80:27:_write 2
../Core/Src/syscalls.c:92:5:_close 1
../Core/Src/syscalls.c:99:5:_fstat 1
../Core/Src/syscalls.c:106:5:_isatty 1
../Core/Src/syscalls.c:112:5:_lseek 1
../Core/Src/syscalls.c:120:5:_open 1
../Core/Src/syscalls.c:128:5:_wait 1
../Core/Src/syscalls.c:135:5:_unlink 1
../Core/Src/syscalls.c:142:5:_times 1
../Core/Src/syscalls.c:148:5:_stat 1
../Core/Src/syscalls.c:155:5:_link 1
../Core/Src/syscalls.c:163:5:_fork 1
../Core/Src/syscalls.c:169:5:_execve 1
Debug/Core/Src/sysmem.cyclo
-1
View File
@@ -1 +0,0 @@
../Core/Src/sysmem.c:53:7:_sbrk 3
Debug/Core/Src/system_stm32f1xx.cyclo
-2
View File
@@ -1,2 +0,0 @@
../Core/Src/system_stm32f1xx.c:175:6:SystemInit 1
../Core/Src/system_stm32f1xx.c:224:6:SystemCoreClockUpdate 8
Debug/Core/Src/tim.cyclo
-5
View File
@@ -1,5 +0,0 @@
../Core/Src/tim.c:31:6:MX_TIM3_Init 8
../Core/Src/tim.c:95:6:MX_TIM4_Init 8
../Core/Src/tim.c:157:6:HAL_TIM_Base_MspInit 3
../Core/Src/tim.c:187:6:HAL_TIM_MspPostInit 3
../Core/Src/tim.c:235:6:HAL_TIM_Base_MspDeInit 3
Debug/Core/Src/usart.cyclo
-6
View File
@@ -1,6 +0,0 @@
../Core/Src/usart.c:33:6:MX_UART5_Init 2
../Core/Src/usart.c:62:6:MX_USART1_UART_Init 2
../Core/Src/usart.c:91:6:MX_USART2_UART_Init 2
../Core/Src/usart.c:120:6:MX_USART3_UART_Init 2
../Core/Src/usart.c:148:6:HAL_UART_MspInit 5
../Core/Src/usart.c:279:6:HAL_UART_MspDeInit 5

Some files were not shown because too many files have changed in this diff Show More