almost done dma

CCSModuleSW30Web.ioc

@@ -1,9 +1,26 @@
 #MicroXplorer Configuration settings - do not modify
-ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_8
+ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_3
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master
+ADC1.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_4
+ADC1.Channel-2\#ChannelRegularConversion=ADC_CHANNEL_8
+ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_9
+ADC1.Channel-4\#ChannelRegularConversion=ADC_CHANNEL_TEMPSENSOR
+ADC1.Channel-5\#ChannelRegularConversion=ADC_CHANNEL_VREFINT
+ADC1.ExternalTrigConv=ADC_EXTERNALTRIGCONV_T3_TRGO
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,Rank-4\#ChannelRegularConversion,Channel-4\#ChannelRegularConversion,SamplingTime-4\#ChannelRegularConversion,Rank-5\#ChannelRegularConversion,Channel-5\#ChannelRegularConversion,SamplingTime-5\#ChannelRegularConversion,NbrOfConversion,ExternalTrigConv
+ADC1.NbrOfConversion=6
 ADC1.NbrOfConversionFlag=1
 ADC1.Rank-0\#ChannelRegularConversion=1
-ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.Rank-1\#ChannelRegularConversion=2
+ADC1.Rank-2\#ChannelRegularConversion=3
+ADC1.Rank-3\#ChannelRegularConversion=4
+ADC1.Rank-4\#ChannelRegularConversion=5
+ADC1.Rank-5\#ChannelRegularConversion=6
+ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_41CYCLES_5
+ADC1.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_41CYCLES_5
+ADC1.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLETIME_41CYCLES_5
+ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_41CYCLES_5
+ADC1.SamplingTime-4\#ChannelRegularConversion=ADC_SAMPLETIME_41CYCLES_5
+ADC1.SamplingTime-5\#ChannelRegularConversion=ADC_SAMPLETIME_41CYCLES_5
 ADC1.master=1
 CAD.formats=
 CAD.pinconfig=
@@ -30,6 +47,57 @@ CAN2.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,Presca
 CAN2.NART=ENABLE
 CAN2.Prescaler=16
 CAN2.TXFP=ENABLE
+Dma.ADC1.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.ADC1.0.Instance=DMA1_Channel1
+Dma.ADC1.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
+Dma.ADC1.0.MemInc=DMA_MINC_ENABLE
+Dma.ADC1.0.Mode=DMA_CIRCULAR
+Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
+Dma.ADC1.0.PeriphInc=DMA_PINC_DISABLE
+Dma.ADC1.0.Priority=DMA_PRIORITY_MEDIUM
+Dma.ADC1.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.Request0=ADC1
+Dma.Request1=USART2_RX
+Dma.Request2=USART2_TX
+Dma.Request3=USART3_RX
+Dma.Request4=USART3_TX
+Dma.RequestsNb=5
+Dma.USART2_RX.1.Direction=DMA_PERIPH_TO_MEMORY
+Dma.USART2_RX.1.Instance=DMA1_Channel6
+Dma.USART2_RX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.USART2_RX.1.MemInc=DMA_MINC_ENABLE
+Dma.USART2_RX.1.Mode=DMA_NORMAL
+Dma.USART2_RX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.USART2_RX.1.PeriphInc=DMA_PINC_DISABLE
+Dma.USART2_RX.1.Priority=DMA_PRIORITY_VERY_HIGH
+Dma.USART2_RX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.USART2_TX.2.Direction=DMA_MEMORY_TO_PERIPH
+Dma.USART2_TX.2.Instance=DMA1_Channel7
+Dma.USART2_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.USART2_TX.2.MemInc=DMA_MINC_ENABLE
+Dma.USART2_TX.2.Mode=DMA_NORMAL
+Dma.USART2_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.USART2_TX.2.PeriphInc=DMA_PINC_DISABLE
+Dma.USART2_TX.2.Priority=DMA_PRIORITY_HIGH
+Dma.USART2_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.USART3_RX.3.Direction=DMA_PERIPH_TO_MEMORY
+Dma.USART3_RX.3.Instance=DMA1_Channel3
+Dma.USART3_RX.3.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.USART3_RX.3.MemInc=DMA_MINC_ENABLE
+Dma.USART3_RX.3.Mode=DMA_NORMAL
+Dma.USART3_RX.3.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.USART3_RX.3.PeriphInc=DMA_PINC_DISABLE
+Dma.USART3_RX.3.Priority=DMA_PRIORITY_VERY_HIGH
+Dma.USART3_RX.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.USART3_TX.4.Direction=DMA_MEMORY_TO_PERIPH
+Dma.USART3_TX.4.Instance=DMA1_Channel2
+Dma.USART3_TX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.USART3_TX.4.MemInc=DMA_MINC_ENABLE
+Dma.USART3_TX.4.Mode=DMA_NORMAL
+Dma.USART3_TX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.USART3_TX.4.PeriphInc=DMA_PINC_DISABLE
+Dma.USART3_TX.4.Priority=DMA_PRIORITY_HIGH
+Dma.USART3_TX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
 File.Version=6
 GPIO.groupedBy=Group By Peripherals
 KeepUserPlacement=false
@@ -37,86 +105,99 @@ Mcu.CPN=STM32F107VCT6
 Mcu.Family=STM32F1
 Mcu.IP0=ADC1
 Mcu.IP1=CAN1
-Mcu.IP10=UART5
+Mcu.IP10=TIM4
-Mcu.IP11=USART1
+Mcu.IP11=UART5
-Mcu.IP12=USART2
+Mcu.IP12=USART1
-Mcu.IP13=USART3
+Mcu.IP13=USART2
+Mcu.IP14=USART3
 Mcu.IP2=CAN2
 Mcu.IP3=CRC
-Mcu.IP4=NVIC
+Mcu.IP4=DMA
-Mcu.IP5=RCC
+Mcu.IP5=NVIC
-Mcu.IP6=RTC
+Mcu.IP6=RCC
-Mcu.IP7=SYS
+Mcu.IP7=RTC
-Mcu.IP8=TIM3
+Mcu.IP8=SYS
-Mcu.IP9=TIM4
+Mcu.IP9=TIM3
-Mcu.IPNb=14
+Mcu.IPNb=15
 Mcu.Name=STM32F107V(B-C)Tx
 Mcu.Package=LQFP100
 Mcu.Pin0=PC14-OSC32_IN
 Mcu.Pin1=PC15-OSC32_OUT
-Mcu.Pin10=PC4
+Mcu.Pin10=PA5
-Mcu.Pin11=PC5
+Mcu.Pin11=PA6
-Mcu.Pin12=PB0
+Mcu.Pin12=PA7
-Mcu.Pin13=PB1
+Mcu.Pin13=PC4
-Mcu.Pin14=PE7
+Mcu.Pin14=PC5
-Mcu.Pin15=PE8
+Mcu.Pin15=PB0
-Mcu.Pin16=PE9
+Mcu.Pin16=PB1
-Mcu.Pin17=PE10
+Mcu.Pin17=PE7
-Mcu.Pin18=PE11
+Mcu.Pin18=PE8
-Mcu.Pin19=PE12
+Mcu.Pin19=PE9
 Mcu.Pin2=OSC_IN
-Mcu.Pin20=PE14
+Mcu.Pin20=PE10
-Mcu.Pin21=PD13
+Mcu.Pin21=PE11
-Mcu.Pin22=PD14
+Mcu.Pin22=PE12
-Mcu.Pin23=PD15
+Mcu.Pin23=PE14
-Mcu.Pin24=PA9
+Mcu.Pin24=PB10
-Mcu.Pin25=PA10
+Mcu.Pin25=PB11
-Mcu.Pin26=PA13
+Mcu.Pin26=PD13
-Mcu.Pin27=PA14
+Mcu.Pin27=PD14
-Mcu.Pin28=PA15
+Mcu.Pin28=PD15
-Mcu.Pin29=PC10
+Mcu.Pin29=PA9
 Mcu.Pin3=OSC_OUT
-Mcu.Pin30=PC11
+Mcu.Pin30=PA10
-Mcu.Pin31=PC12
+Mcu.Pin31=PA13
-Mcu.Pin32=PD0
+Mcu.Pin32=PA14
-Mcu.Pin33=PD1
+Mcu.Pin33=PA15
-Mcu.Pin34=PD2
+Mcu.Pin34=PC10
-Mcu.Pin35=PD3
+Mcu.Pin35=PC11
-Mcu.Pin36=PD4
+Mcu.Pin36=PC12
-Mcu.Pin37=PD5
+Mcu.Pin37=PD0
-Mcu.Pin38=PD6
+Mcu.Pin38=PD1
-Mcu.Pin39=PD7
+Mcu.Pin39=PD2
-Mcu.Pin4=PC3
+Mcu.Pin4=PC2
-Mcu.Pin40=PB3
+Mcu.Pin40=PD3
-Mcu.Pin41=PB4
+Mcu.Pin41=PD4
-Mcu.Pin42=PB5
+Mcu.Pin42=PD5
-Mcu.Pin43=PB6
+Mcu.Pin43=PD6
-Mcu.Pin44=PB7
+Mcu.Pin44=PD7
-Mcu.Pin45=PB8
+Mcu.Pin45=PB3
-Mcu.Pin46=PB9
+Mcu.Pin46=PB4
-Mcu.Pin47=PE1
+Mcu.Pin47=PB5
-Mcu.Pin48=VP_ADC1_TempSens_Input
+Mcu.Pin48=PB6
-Mcu.Pin49=VP_ADC1_Vref_Input
+Mcu.Pin49=PB7
-Mcu.Pin5=PA1
+Mcu.Pin5=PC3
-Mcu.Pin50=VP_CRC_VS_CRC
+Mcu.Pin50=PB8
-Mcu.Pin51=VP_RTC_VS_RTC_Activate
+Mcu.Pin51=PB9
-Mcu.Pin52=VP_SYS_VS_Systick
+Mcu.Pin52=PE1
-Mcu.Pin53=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin53=VP_ADC1_TempSens_Input
-Mcu.Pin54=VP_TIM4_VS_ClockSourceINT
+Mcu.Pin54=VP_ADC1_Vref_Input
-Mcu.Pin6=PA2
+Mcu.Pin55=VP_CRC_VS_CRC
-Mcu.Pin7=PA3
+Mcu.Pin56=VP_RTC_VS_RTC_Activate
-Mcu.Pin8=PA4
+Mcu.Pin57=VP_SYS_VS_Systick
-Mcu.Pin9=PA7
+Mcu.Pin58=VP_TIM3_VS_ClockSourceINT
-Mcu.PinsNb=55
+Mcu.Pin59=VP_TIM3_VS_no_output1
+Mcu.Pin6=PA1
+Mcu.Pin60=VP_TIM4_VS_ClockSourceINT
+Mcu.Pin7=PA2
+Mcu.Pin8=PA3
+Mcu.Pin9=PA4
+Mcu.PinsNb=61
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F107VCTx
 MxCube.Version=6.15.0
 MxDb.Version=DB.6.0.150
+NVIC.ADC1_2_IRQn=true\:7\:0\:true\:false\:true\:true\:true\:true
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.CAN1_RX0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.CAN1_RX0_IRQn=true\:3\:0\:true\:false\:true\:true\:true\:true
-NVIC.CAN2_RX1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.CAN2_RX1_IRQn=true\:3\:0\:true\:false\:true\:true\:true\:true
 NVIC.CAN2_TX_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.DMA1_Channel1_IRQn=true\:1\:0\:true\:false\:true\:false\:true\:true
+NVIC.DMA1_Channel2_IRQn=true\:4\:0\:true\:false\:true\:false\:true\:true
+NVIC.DMA1_Channel3_IRQn=true\:1\:0\:true\:false\:true\:false\:true\:true
+NVIC.DMA1_Channel6_IRQn=true\:1\:0\:true\:false\:true\:false\:true\:true
+NVIC.DMA1_Channel7_IRQn=true\:4\:0\:true\:false\:true\:false\:true\:true
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.ForceEnableDMAVector=true
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
@@ -126,11 +207,11 @@ NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
-NVIC.TIM3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.TIM3_IRQn=true\:6\:0\:true\:false\:true\:true\:true\:true
-NVIC.UART5_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.UART5_IRQn=true\:5\:0\:true\:false\:true\:true\:true\:true
-NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.USART1_IRQn=true\:5\:0\:true\:false\:true\:true\:true\:true
-NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.USART2_IRQn=true\:2\:0\:true\:false\:true\:true\:true\:true
-NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.USART3_IRQn=true\:2\:0\:true\:false\:true\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 OSC_IN.Mode=HSE-External-Oscillator
 OSC_IN.Signal=RCC_OSC_IN
@@ -162,6 +243,16 @@ PA4.GPIOParameters=GPIO_Label
 PA4.GPIO_Label=CP_ADC
 PA4.Locked=true
 PA4.Signal=ADCx_IN4
+PA5.GPIOParameters=GPIO_Speed,GPIO_Label
+PA5.GPIO_Label=DBG2
+PA5.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PA5.Locked=true
+PA5.Signal=GPIO_Output
+PA6.GPIOParameters=GPIO_Speed,GPIO_Label
+PA6.GPIO_Label=DBG3
+PA6.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PA6.Locked=true
+PA6.Signal=GPIO_Output
 PA7.GPIOParameters=GPIO_Label
 PA7.GPIO_Label=CP_PWM
 PA7.Locked=true
@@ -177,6 +268,16 @@ PB1.GPIOParameters=GPIO_Label
 PB1.GPIO_Label=ADC_NTC2
 PB1.Locked=true
 PB1.Signal=ADCx_IN9
+PB10.GPIOParameters=GPIO_Speed,GPIO_Label
+PB10.GPIO_Label=DBG5
+PB10.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PB10.Locked=true
+PB10.Signal=GPIO_Output
+PB11.GPIOParameters=GPIO_Speed,GPIO_Label
+PB11.GPIO_Label=DBG4
+PB11.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PB11.Locked=true
+PB11.Signal=GPIO_Output
 PB3.GPIOParameters=GPIO_Label
 PB3.GPIO_Label=IN_FB2
 PB3.Locked=true
@@ -211,6 +312,11 @@ PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
 PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+PC2.GPIOParameters=GPIO_Speed,GPIO_Label
+PC2.GPIO_Label=DBG1
+PC2.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PC2.Locked=true
+PC2.Signal=GPIO_Output
 PC3.GPIOParameters=GPIO_Label
 PC3.GPIO_Label=RELAY_CP
 PC3.Locked=true
@@ -320,7 +426,7 @@ ProjectManager.ToolChainLocation=
 ProjectManager.UAScriptAfterPath=
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_ADC1_Init-ADC1-false-HAL-true,4-MX_CAN1_Init-CAN1-false-HAL-true,5-MX_CAN2_Init-CAN2-false-HAL-true,6-MX_RTC_Init-RTC-false-HAL-true,7-MX_TIM4_Init-TIM4-false-HAL-true,8-MX_USART2_UART_Init-USART2-false-HAL-true,9-MX_CRC_Init-CRC-false-HAL-true,10-MX_UART5_Init-UART5-false-HAL-true,11-MX_USART1_UART_Init-USART1-false-HAL-true,12-MX_USART3_UART_Init-USART3-false-HAL-true,13-MX_TIM3_Init-TIM3-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_CAN1_Init-CAN1-false-HAL-true,6-MX_CAN2_Init-CAN2-false-HAL-true,7-MX_RTC_Init-RTC-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_USART2_UART_Init-USART2-false-HAL-true,10-MX_CRC_Init-CRC-false-HAL-true,11-MX_UART5_Init-UART5-false-HAL-true,12-MX_USART1_UART_Init-USART1-false-HAL-true,13-MX_USART3_UART_Init-USART3-false-HAL-true,14-MX_TIM3_Init-TIM3-false-HAL-true
 RCC.ADCFreqValue=12000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV6
 RCC.AHBFreq_Value=72000000
@@ -371,8 +477,11 @@ SH.S_TIM4_CH3.0=TIM4_CH3,PWM Generation3 CH3
 SH.S_TIM4_CH3.ConfNb=1
 SH.S_TIM4_CH4.0=TIM4_CH4,PWM Generation4 CH4
 SH.S_TIM4_CH4.ConfNb=1
+TIM3.Channel-Output\ Compare1\ No\ Output=TIM_CHANNEL_1
 TIM3.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
-TIM3.IPParameters=Channel-PWM Generation2 CH2
+TIM3.IPParameters=Channel-PWM Generation2 CH2,TIM_MasterOutputTrigger,Channel-Output Compare1 No Output,Pulse-Output Compare1 No Output
+TIM3.Pulse-Output\ Compare1\ No\ Output=1
+TIM3.TIM_MasterOutputTrigger=TIM_TRGO_OC1
 TIM4.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
 TIM4.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
 TIM4.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
@@ -400,6 +509,8 @@ VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 VP_TIM3_VS_ClockSourceINT.Mode=Internal
 VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
+VP_TIM3_VS_no_output1.Mode=Output Compare1 No Output
+VP_TIM3_VS_no_output1.Signal=TIM3_VS_no_output1
 VP_TIM4_VS_ClockSourceINT.Mode=Internal
 VP_TIM4_VS_ClockSourceINT.Signal=TIM4_VS_ClockSourceINT
 board=custom

CHAT_SESSION_CHANGELOG.md

@@ -0,0 +1,133 @@
+# Журнал изменений (сессия чата): `fork/CCSModuleSW30Web`
+
+Документ фиксирует доработки проекта **CCSModuleSW30Web** в ветке/каталоге форка  
+`/Users/colorbass/STM32CubeIDE/workspace_1.12.0/fork/CCSModuleSW30Web`, обсуждавшиеся и вносившиеся в рамках описанной сессии (UART, ADC/DMA, CP, отладка IRQ, оптимизация `-Ofast` для кода из прерываний).
+
+---
+
+## 1. UART и протокол
+
+### 1.1. UART3 (Everest / `serial.c`)
+
+- Таймаут «нет связи с хостом»:** `EVEREST_TIMEOUT_MS` = **5000** мс.
+- Жёсткий реинициал при отсутствии RX:** `UART3_REINIT_TIMEOUT_MS` = **1500** мс (с защитой от слишком частых реинициалов через `uart3_last_reinit_tick`).
+- Расширено логирование путей сброса/ошибок приёма и ошибок HAL для диагностики «таймаут без остановки UART3».
+- Колбэки и вспомогательные функции, вызываемые из контекста прерывания, помечены **`ISR_FAST`** (см. раздел 6):  
+  `CCS_RxEventCallback`, `HAL_UART_ErrorCallback`, `uart3_log_hal_error`, `uart3_arm_rx_or_log`, цепочка разбора пакета (`process_received_packet`, `crc16_ibm`, `expected_payload_len`, `apply_command`).
+
+### 1.2. UART2 / `serial_control.c`
+
+- Отдельная логика **`SC_UART2_Watchdog()`**, вызывается из **`SC_Task()`** (не из IRQ).
+- Константы:
+  - **`SC_UART2_REINIT_TIMEOUT_MS`** = **500** мс — порог для жёсткого реинициала при отсутствии пакетов;
+  - **`SC_UART2_PACKET_TIMEOUT_MS`** = **5000** мс — таймаут коммуникации.
+- Сценарий **новый пакет при `BUSY_TX`**: при необходимости **`Abort_IT`**, сброс направления RS-485, затем повторная инициализация UART и приём `ReceiveToIdle_IT` (защита от обрыва TX из-за агрессивного watchdog).
+- Отдельная ветка **жёсткого реинициала при `BUSY_TX`** с логом `USART2 BUSY_TX: hard reinit` (отслеживание `sc_uart2_last_busy_tx_reinit_packet_tick`).
+- HAL-колбэки **`HAL_UARTEx_RxEventCallback`**, **`HAL_UART_TxCpltCallback`** помечены **`ISR_FAST`**.
+
+### 1.3. `SC_SendPacket` и стек CRC/кодирования
+
+- Для единообразной оптимизации пути «IRQ → ответ» на функции **`calculate_crc32`**, **`encode_packet`**, **`parse_packet`**, **`process_received_packet`** и публичную **`SC_SendPacket`** добавлен **`ISR_FAST`**.
+- В **`Core/Inc/serial_control.h`**: подключение **`isr_opt.h`**, прототип **`ISR_FAST void SC_SendPacket(...)`** (согласованность с определением в `.c`).
+
+**Замечание:** `SC_SendPacket` вызывается и из основного потока; для GCC вся функция компилируется с `-Ofast`. При необходимости строгого разделения можно вынести отдельную версию «только из IRQ».
+
+---
+
+## 2. Отладочные линии DBG в `stm32f1xx_it.c`
+
+На время входа/выхода из выбранных обработчиков прерываний поднимается/опускается соответствующий GPIO — удобно для осциллографа (длительность IRQ).
+
+| Линия | Обработчик |
+|--------|------------|
+| **DBG1** | `UART5_IRQHandler` |
+| **DBG2** | `USART2_IRQHandler` |
+| **DBG3** | `USART3_IRQHandler` |
+| **DBG4** | `DMA1_Channel1_IRQHandler`, `ADC1_2_IRQHandler`, `TIM3_IRQHandler` |
+| **DBG5** | `CAN1_RX0_IRQHandler`, `CAN2_TX_IRQHandler`, `CAN2_RX1_IRQHandler` |
+| — | `USART1_IRQHandler` — без обёртки DBG (по согласованию) |
+
+В **`DMA1_Channel1_IRQHandler`** вызывается **`HAL_DMA_IRQHandler(&hdma_adc1)`** для цепочки ADC+DMA.
+
+Для всего файла **`stm32f1xx_it.c`** под GCC добавлено:
+
+```c
+#pragma GCC optimize("Ofast")
+```
+
+(в блоке `USER CODE BEGIN Includes`).
+
+---
+
+## 3. ADC: DMA, глобальные данные, колбэк
+
+- Файлы **`adc.c` / `adc.h`**: структура **`ADC_ScanData_t`**, глобально **`volatile ADC_ScanData_t adc_data`** с полями сырых каналов (`in3_raw`, `cp_raw`, `ntc1_raw`, `ntc2_raw`, `temp_sensor_raw`, `vrefint_raw` и т.д. по фактическому объявлению в заголовке).
+- **`HAL_ADC_ConvCpltCallback`**: копирование из буфера DMA в **`adc_data`**, помечен **`ISR_FAST`**.
+- Публичная **`ADC_ScanStart()`** — запуск сканирования (после калибровки вызывается из инициализации платы).
+- **`board.c`**: после **`HAL_ADCEx_Calibration_Start`** вызывается **`ADC_ScanStart()`**; **`CONN_ReadTemp`** читает **`adc_data.ntc1_raw` / `ntc2_raw`** вместо блокирующего опроса ADC.
+
+**Диагностика (из обсуждения):** если не вызываются **`HAL_ADC_ConvCpltCallback`** / **`HAL_DMA_IRQHandler`**, проверять: срабатывание триггера ADC (например, **TIM3 TRGO**), работу TIM3, порядок инициализации DMA/NVIC, срабатывание **`DMA1_Channel1_IRQHandler`**.
+
+---
+
+## 4. CP (`cp.c` / `cp.h`)
+
+- Измерение опоры на **`adc_data.cp_raw`** (и при необходимости **`vrefint_raw`** по текущей реализации в коде).
+- Логика классификации/порогов приведена к варианту, согласованному с основным **CCSModuleSW30Web** (не форк).
+- Сэмпл по таймеру: уход от тяжёлой работы в IRQ OC — использование **`HAL_TIM_OC_Start`** без прерывания по сравнению, обновление напряжения в **`CP_GetVoltage()`** / основном цикле (**`CP_Loop`** опирается на **`CP_GetState()`** и т.п. по фактическому коду).
+
+---
+
+## 5. Отладочный UART (`debug.c`)
+
+При **`#ifndef USE_WEB_INTERFACE`** (или эквивалентной ветке сборки в файле): колбэк **`HAL_UARTEx_RxEventCallback`** и **`debug_rx_interrupt`** помечены **`ISR_FAST`**.
+
+---
+
+## 6. Оптимизация `-Ofast` для кода из прерываний
+
+### 6.1. Макрос `ISR_FAST`
+
+Файл **`Core/Inc/isr_opt.h`**:
+
+- **GCC:** `#define ISR_FAST __attribute__((optimize("Ofast")))`
+- **Иное:** пустой макрос.
+
+### 6.2. Где используется (по состоянию репозитория)
+
+| Файл | Элементы с `ISR_FAST` / pragma |
+|------|--------------------------------|
+| `stm32f1xx_it.c` | `#pragma GCC optimize("Ofast")` на весь файл (GCC) |
+| `adc.c` | `HAL_ADC_ConvCpltCallback` |
+| `serial.c` | `CCS_RxEventCallback`, `HAL_UART_ErrorCallback`, `uart3_log_hal_error`, `uart3_arm_rx_or_log`, `process_received_packet`, `crc16_ibm`, `expected_payload_len`, `apply_command` |
+| `serial_control.c` | `HAL_UARTEx_RxEventCallback`, `HAL_UART_TxCpltCallback`, `calculate_crc32`, `encode_packet`, `parse_packet`, `process_received_packet`, `SC_SendPacket` |
+| `serial_control.h` | прототип `SC_SendPacket` + `#include "isr_opt.h"` |
+| `psu_control.c` | `HAL_CAN_RxFifo1MsgPendingCallback` |
+| `debug.c` | см. раздел 5 |
+
+---
+
+## 7. Ограничения и переносимость
+
+- **`ISR_FAST`** и pragma в **`stm32f1xx_it.c`** рассчитаны на **GCC** (STM32CubeIDE по умолчанию). Для **IAR / ARM Compiler 6** потребуется отдельная стратегия (прагмы/ключи проекта).
+- **`-Ofast`** допускает агрессивные преобразования с плавающей точкой и перестановки, влияющие на строго воспроизводимую арифметику; для критичных вычислений вне IRQ при необходимости ограничивайте область оптимизации.
+
+---
+
+## 8. Затронутые пути (краткий список)
+
+- `Core/Inc/isr_opt.h` — новый/центральный заголовок оптимизации IRQ.
+- `Core/Inc/serial_control.h` — `isr_opt.h`, `ISR_FAST` у `SC_SendPacket`.
+- `Core/Src/stm32f1xx_it.c` — DBG, DMA ADC, pragma `Ofast`.
+- `Core/Src/adc.c`, `Core/Inc/adc.h` — DMA, `adc_data`, `ADC_ScanStart`, колбэк.
+- `Core/Src/board.c` — калибровка, старт скана, температура из `adc_data`.
+- `Core/Src/cp.c`, `Core/Inc/cp.h` — CP и ADC.
+- `Core/Src/serial.c` — UART3, таймауты, логи, `ISR_FAST`.
+- `Core/Src/serial_control.c` — UART2, watchdog, `ISR_FAST`.
+- `Core/Src/psu_control.c` — CAN RX callback.
+- `Core/Src/debug.c` — отладочный UART под условием сборки.
+- `Core/Src/dma.c`, `gpio.c`, `main.h` — по необходимости для DMA1 Ch1 и DBG-пинов.
+
+---
+
+*Документ сгенерирован для фиксации контекста сессии; при дальнейших правках кода имеет смысл обновлять соответствующие разделы вручную.*

Core/Inc/adc.h

@@ -29,18 +29,29 @@ extern "C" {
 #include "main.h"
 
 /* USER CODE BEGIN Includes */
+#include <stdint.h>
 
 /* USER CODE END Includes */
 
 extern ADC_HandleTypeDef hadc1;
 
 /* USER CODE BEGIN Private defines */
+typedef struct {
+  uint16_t in3_raw;         /* Rank1: ADC_CHANNEL_3  */
+  uint16_t cp_raw;          /* Rank2: ADC_CHANNEL_4  */
+  uint16_t ntc1_raw;        /* Rank3: ADC_CHANNEL_8  */
+  uint16_t ntc2_raw;        /* Rank4: ADC_CHANNEL_9  */
+  uint16_t temp_sensor_raw; /* Rank5: ADC_CHANNEL_TEMPSENSOR */
+  uint16_t vrefint_raw;     /* Rank6: ADC_CHANNEL_VREFINT */
+} ADC_ScanData_t;
+extern volatile ADC_ScanData_t adc_data;
 
 /* USER CODE END Private defines */
 
 void MX_ADC1_Init(void);
 
 /* USER CODE BEGIN Prototypes */
+void ADC_ScanStart(void);
 
 /* USER CODE END Prototypes */
 

Core/Inc/board.h

@@ -55,7 +55,8 @@ typedef struct __attribute__((packed)) {
 	uint8_t stationType;        // Байт 4: тип станции
 	uint8_t boardVersion;       // Байт 5: версия платы
 	uint8_t addrEdcan;          // Байт 6: адрес EDCAN
-	uint8_t reserved[57];       // Байты 7-63: зарезервированы
+	uint8_t maxPower;           // Байт 7: максимальная мощность станции (5кВт/bit)
+	uint8_t reserved[56];       // Байты 8-63: зарезервированы
 } InfoBlock_t;
 
 extern InfoBlock_t *InfoBlock;

Core/Inc/cp.h

@@ -16,11 +16,15 @@ typedef enum {
     EV_STATE_ACQUIRING = 6,
 } CP_State_t;
 
+extern CP_State_t cp_state_buffer;
+
 void CP_Init(void);
 void CP_SetDuty(uint8_t percentage);
 uint8_t CP_GetDuty(void);
 int32_t CP_GetVoltage(void);
 CP_State_t CP_GetState(void);
+CP_State_t CP_GetFilteredState(void);
+void CP_FilterState(void);
 void CP_Loop(void);
 
 #endif

Core/Inc/dma.h

@@ -0,0 +1,52 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    dma.h
+  * @brief   This file contains all the function prototypes for
+  *          the dma.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __DMA_H__
+#define __DMA_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* DMA memory to memory transfer handles -------------------------------------*/
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_DMA_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_H__ */
+

Core/Inc/isr_opt.h

@@ -0,0 +1,11 @@
+#ifndef ISR_OPT_H
+#define ISR_OPT_H
+
+/* GCC: быстрые функции, вызываемые из IRQ / из HAL из IRQ-контекста */
+#if defined(__GNUC__)
+#define ISR_FAST __attribute__((optimize("Ofast")))
+#else
+#define ISR_FAST
+#endif
+
+#endif /* ISR_OPT_H */

Core/Inc/main.h

@@ -41,9 +41,9 @@ extern "C" {
 
 /* Exported constants --------------------------------------------------------*/
 /* USER CODE BEGIN EC */
-#define FW_VERSION_MAJOR 0x01
+#define FW_VERSION_MAJOR 1
-#define FW_VERSION_MINOR 0x00
+#define FW_VERSION_MINOR 0
-#define FW_VERSION_PATCH 0x02
+#define FW_VERSION_PATCH 17
 /* USER CODE END EC */
 
 /* Exported macro ------------------------------------------------------------*/
@@ -59,6 +59,8 @@ void Error_Handler(void);
 /* USER CODE END EFP */
 
 /* Private defines -----------------------------------------------------------*/
+#define DBG1_Pin GPIO_PIN_2
+#define DBG1_GPIO_Port GPIOC
 #define RELAY_CP_Pin GPIO_PIN_3
 #define RELAY_CP_GPIO_Port GPIOC
 #define IN_SW0_Pin GPIO_PIN_1
@@ -67,6 +69,10 @@ void Error_Handler(void);
 #define IN_SW1_GPIO_Port GPIOA
 #define CP_ADC_Pin GPIO_PIN_4
 #define CP_ADC_GPIO_Port GPIOA
+#define DBG2_Pin GPIO_PIN_5
+#define DBG2_GPIO_Port GPIOA
+#define DBG3_Pin GPIO_PIN_6
+#define DBG3_GPIO_Port GPIOA
 #define CP_PWM_Pin GPIO_PIN_7
 #define CP_PWM_GPIO_Port GPIOA
 #define LOCK_A_Pin GPIO_PIN_4
@@ -91,6 +97,10 @@ void Error_Handler(void);
 #define RELAY5_GPIO_Port GPIOE
 #define AC_OK_Pin GPIO_PIN_14
 #define AC_OK_GPIO_Port GPIOE
+#define DBG5_Pin GPIO_PIN_10
+#define DBG5_GPIO_Port GPIOB
+#define DBG4_Pin GPIO_PIN_11
+#define DBG4_GPIO_Port GPIOB
 #define RELAY_CC_Pin GPIO_PIN_15
 #define RELAY_CC_GPIO_Port GPIOA
 #define RELAY_DC_Pin GPIO_PIN_3

Core/Inc/psu_control.h

@@ -88,6 +88,7 @@ typedef struct {
 	// Дополнительные параметры для одного модуля DC30
 	uint32_t power_limit;    // лимит мощности [кВт]
 	uint8_t  hv_mode;        // HV-режим (ограничение напряжения)
+	uint32_t hv_tick;        // таймер для задержки входа в HV-режим
 
 	uint32_t tempAmbient;    // температура окружающего воздуха (из PSU_04)
 	union { uint8_t raw; PSU_Status0_t bits; } status0;  // modularForm0

Core/Inc/serial.h

@@ -11,13 +11,16 @@ void CCS_Init(void);
 void CCS_SendEmergencyStop(void);
 void CCS_SendStart(void);
 void CCS_RxEventCallback(UART_HandleTypeDef *huart, uint16_t size);
+void CCS_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
 
 typedef enum {
-    CCS_DISABLED = 0,
+    CCS_UNKNOWN = 0,
-    CCS_UNPLUGGED = 1,
+    CCS_DISABLED = 1,
-    CCS_AUTH_REQUIRED = 2,
+    CCS_UNPLUGGED = 2,
-    CCS_CONNECTED = 3,
+    CCS_AUTH_REQUIRED = 3,
-    CCS_REPLUGGING = 4,
+    CCS_CONNECTED = 4,
+    CCS_REPLUGGING = 5,
 } CCS_ConnectorState_t;
 
 typedef enum {

Core/Inc/serial_control.h

@@ -4,6 +4,7 @@
 #include "main.h"
 #include <string.h>
 #include "charger_control.h"
+#include "isr_opt.h"
 
 #define USE_WEB_INTERFACE
 
@@ -168,7 +169,8 @@ struct SerialControl_t {
 // Публичные методы
 void SC_Init();
 void SC_Task();
-void SC_SendPacket(const uint8_t* payload, uint16_t payload_len, uint8_t response_code);
+ISR_FAST void SC_SendPacket(const uint8_t* payload, uint16_t payload_len, uint8_t response_code);
+void SC_RecoverUartDma(UART_HandleTypeDef *huart);
 
 // Внешняя функция обработки команд (определена в serial_handler.c)
 extern void SC_CommandHandler(ReceivedCommand_t* cmd);

Core/Inc/stm32f1xx_hal_conf.h

@@ -42,7 +42,7 @@
 /*#define HAL_CORTEX_MODULE_ENABLED   */
 #define HAL_CRC_MODULE_ENABLED
 /*#define HAL_DAC_MODULE_ENABLED   */
-/*#define HAL_DMA_MODULE_ENABLED   */
+#define HAL_DMA_MODULE_ENABLED
 /*#define HAL_ETH_MODULE_ENABLED   */
 /*#define HAL_FLASH_MODULE_ENABLED   */
 #define HAL_GPIO_MODULE_ENABLED

Core/Inc/stm32f1xx_it.h

@@ -55,6 +55,12 @@ void SVC_Handler(void);
 void DebugMon_Handler(void);
 void PendSV_Handler(void);
 void SysTick_Handler(void);
+void DMA1_Channel1_IRQHandler(void);
+void DMA1_Channel2_IRQHandler(void);
+void DMA1_Channel3_IRQHandler(void);
+void DMA1_Channel6_IRQHandler(void);
+void DMA1_Channel7_IRQHandler(void);
+void ADC1_2_IRQHandler(void);
 void CAN1_RX0_IRQHandler(void);
 void TIM3_IRQHandler(void);
 void USART1_IRQHandler(void);

Core/Src/adc.c

@@ -21,10 +21,39 @@
 #include "adc.h"
 
 /* USER CODE BEGIN 0 */
+#include "isr_opt.h"
+static volatile uint16_t adc_dma_raw[6];
+volatile ADC_ScanData_t adc_data = {0};
+static volatile uint8_t adc_scan_data_ready = 0u;
+
+void ADC_ScanStart(void)
+{
+  if (HAL_ADC_Start_DMA(&hadc1, (uint32_t *)adc_dma_raw, 6u) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+ISR_FAST void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc)
+{
+  if (hadc->Instance != ADC1)
+  {
+    return;
+  }
+
+  adc_data.in3_raw = adc_dma_raw[0];
+  adc_data.cp_raw = adc_dma_raw[1];
+  adc_data.ntc1_raw = adc_dma_raw[2];
+  adc_data.ntc2_raw = adc_dma_raw[3];
+  adc_data.temp_sensor_raw = adc_dma_raw[4];
+  adc_data.vrefint_raw = adc_dma_raw[5];
+  adc_scan_data_ready = 1u;
+}
 
 /* USER CODE END 0 */
 
 ADC_HandleTypeDef hadc1;
+DMA_HandleTypeDef hdma_adc1;
 
 /* ADC1 init function */
 void MX_ADC1_Init(void)
@@ -43,12 +72,12 @@ void MX_ADC1_Init(void)
   /** Common config
   */
   hadc1.Instance = ADC1;
-  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
+  hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
   hadc1.Init.ContinuousConvMode = DISABLE;
   hadc1.Init.DiscontinuousConvMode = DISABLE;
-  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T3_TRGO;
   hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc1.Init.NbrOfConversion = 1;
+  hadc1.Init.NbrOfConversion = 6;
   if (HAL_ADC_Init(&hadc1) != HAL_OK)
   {
     Error_Handler();
@@ -56,9 +85,54 @@ void MX_ADC1_Init(void)
 
   /** Configure Regular Channel
   */
-  sConfig.Channel = ADC_CHANNEL_8;
+  sConfig.Channel = ADC_CHANNEL_3;
   sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_41CYCLES_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_4;
+  sConfig.Rank = ADC_REGULAR_RANK_2;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_8;
+  sConfig.Rank = ADC_REGULAR_RANK_3;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_9;
+  sConfig.Rank = ADC_REGULAR_RANK_4;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
+  sConfig.Rank = ADC_REGULAR_RANK_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_VREFINT;
+  sConfig.Rank = ADC_REGULAR_RANK_6;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
     Error_Handler();
@@ -97,6 +171,26 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
+    /* ADC1 DMA Init */
+    /* ADC1 Init */
+    hdma_adc1.Instance = DMA1_Channel1;
+    hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
+    hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
+    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+    hdma_adc1.Init.Mode = DMA_CIRCULAR;
+    hdma_adc1.Init.Priority = DMA_PRIORITY_MEDIUM;
+    if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(adcHandle,DMA_Handle,hdma_adc1);
+
+    /* ADC1 interrupt Init */
+    HAL_NVIC_SetPriority(ADC1_2_IRQn, 7, 0);
+    HAL_NVIC_EnableIRQ(ADC1_2_IRQn);
   /* USER CODE BEGIN ADC1_MspInit 1 */
 
   /* USER CODE END ADC1_MspInit 1 */
@@ -124,6 +218,11 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
 
     HAL_GPIO_DeInit(GPIOB, ADC_NTC1_Pin|ADC_NTC2_Pin);
 
+    /* ADC1 DMA DeInit */
+    HAL_DMA_DeInit(adcHandle->DMA_Handle);
+
+    /* ADC1 interrupt Deinit */
+    HAL_NVIC_DisableIRQ(ADC1_2_IRQn);
   /* USER CODE BEGIN ADC1_MspDeInit 1 */
 
   /* USER CODE END ADC1_MspDeInit 1 */

Core/Src/board.c

@@ -1,11 +1,10 @@
 
 #include "main.h"
 #include "board.h"
+#include "adc.h"
 #include "tim.h"
 #include "sma_filter.h"
 
-extern ADC_HandleTypeDef hadc1;
-
 //TODO:
 //TEMP READ
 // Connector temperature sensors
@@ -89,14 +88,15 @@ uint8_t GetBoardTemp(){
 
 void Init_Peripheral(){
     HAL_ADCEx_Calibration_Start(&hadc1);
+    ADC_ScanStart();
 
     RELAY_Write(RELAY_AUX0, 0);
     RELAY_Write(RELAY_AUX1, 0);
     RELAY_Write(RELAY3, 0);
     RELAY_Write(RELAY_DC, 0);
     RELAY_Write(RELAY_AC, 0);
-    RELAY_Write(RELAY_CP, 1);
+    RELAY_Write(RELAY_CP, 0);
-    RELAY_Write(RELAY_CC, 1);
+    RELAY_Write(RELAY_CC, 0);
     RELAY_Write(RELAY_DC1, 0);
 
     SMAFilter_Init(&conn_temp_adc_filter[0]);
@@ -130,27 +130,11 @@ float calculate_NTC_resistance(int adc_value, float Vref, float Vin, float R) {
 }
 
 int16_t CONN_ReadTemp(uint8_t ch){
-	ADC_LockBlocking();
+    uint32_t adcValue = 0u;
-
+    adcValue = ch ? adc_data.ntc2_raw : adc_data.ntc1_raw;
-	//TODO
-	if(ch)ADC_Select_Channel(ADC_CHANNEL_8);
-	else ADC_Select_Channel(ADC_CHANNEL_9);
-    // Начало конверсии
-    HAL_ADC_Start(&hadc1);
-
-
-    // Ожидание окончания конверсии
-    HAL_ADC_PollForConversion(&hadc1, HAL_MAX_DELAY);
-
-    // Получение значения
-    uint32_t adcValue = HAL_ADC_GetValue(&hadc1);
-
-    // Остановка АЦП (по желанию)
-    HAL_ADC_Stop(&hadc1);
 
     int32_t adc_filtered = SMAFilter_Update(&conn_temp_adc_filter[ch ? 1u : 0u], (int32_t)adcValue);
     if((uint32_t)adc_filtered > 4000u) {
-    	ADC_Unlock();
     	return 20; //Термодатчик не подключен
     }
 
@@ -161,7 +145,6 @@ int16_t CONN_ReadTemp(uint8_t ch){
 
     float temp = pt1000_to_temperature(calculate_NTC_resistance((int)adc_filtered, Vref, Vin, R));
 
-    ADC_Unlock();
     return (int16_t)temp;
 
 }

Core/Src/can.c

@@ -127,7 +127,7 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
     __HAL_AFIO_REMAP_CAN1_3();
 
     /* CAN1 interrupt Init */
-    HAL_NVIC_SetPriority(CAN1_RX0_IRQn, 0, 0);
+    HAL_NVIC_SetPriority(CAN1_RX0_IRQn, 3, 0);
     HAL_NVIC_EnableIRQ(CAN1_RX0_IRQn);
   /* USER CODE BEGIN CAN1_MspInit 1 */
 
@@ -165,7 +165,7 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
     /* CAN2 interrupt Init */
     HAL_NVIC_SetPriority(CAN2_TX_IRQn, 0, 0);
     HAL_NVIC_EnableIRQ(CAN2_TX_IRQn);
-    HAL_NVIC_SetPriority(CAN2_RX1_IRQn, 0, 0);
+    HAL_NVIC_SetPriority(CAN2_RX1_IRQn, 3, 0);
     HAL_NVIC_EnableIRQ(CAN2_RX1_IRQn);
   /* USER CODE BEGIN CAN2_MspInit 1 */
 

Core/Src/charger_control.c

@@ -7,6 +7,7 @@
 
 ChargingConnector_t CONN;
 CONN_State_t connectorState;
+extern uint8_t config_initialized;
 
 void CONN_Init(){
 
@@ -42,16 +43,7 @@ void CONN_Task(){
     /* CCS state machine is handled in serial.c.
      * Keep this task lightweight for scheduler compatibility.
      */
-    if (CONN.chargingError != CONN_NO_ERROR) {
-        CONN_SetState(Disabled);
     return;
-    }
-
-    if (connectorState == Unknown) {
-        CONN_SetState(Unplugged);
-    } else if (connectorState == Disabled && CONN.chargingError == CONN_NO_ERROR) {
-        CONN_SetState(Unplugged);
-    }
 }
 
 void CONN_SetState(CONN_State_t state){

Core/Src/cp.c

@@ -1,37 +1,34 @@
 #include "cp.h"
 #include "adc.h"
 #include "board.h"
+#include "debug.h"
 #include "tim.h"
 #include <stdint.h>
+#include <stdlib.h>
 
 #define MAX_DUTY 450
+#define FILTER_ORDER 100
 
 static int32_t cp_voltage_mv = 0;
 static uint8_t cp_duty = 0;
 CP_State_t fake_cp_state = EV_STATE_ACQUIRING;
+CP_State_t cp_state_buffer = EV_STATE_ACQUIRING;
 
-static uint32_t CP_ReadAdcChannel(uint32_t ch) {
-    uint32_t adc = 0;
-
-    ADC_Select_Channel(ch);
-    HAL_ADC_Start(&hadc1);
-    HAL_ADC_PollForConversion(&hadc1, 10);
-    adc = HAL_ADC_GetValue(&hadc1);
-    HAL_ADC_Stop(&hadc1);
-
-    return adc;
-}
 #define VREFINT_CAL_ADDR ((uint16_t*)0x1FFFF7BA) // для STM32F1!
 
 static int32_t CP_ReadVoltageMv(void)
 {
-    uint32_t adc = 0;
+    uint32_t adc_cp = adc_data.cp_raw;
-    int32_t v_adc_mv = 0;
+    uint32_t adc_vref = adc_data.vrefint_raw; // нужно измерять!
-    int32_t v_out_mv = 0;
 
-    adc = CP_ReadAdcChannel((uint32_t)4u);
+    // VREFINT в мВ (берётся из даташита или калибровки MCU)
-    v_adc_mv = (int32_t)((adc * 3300u) / 4095u);
+    const int32_t VREFINT_MV = 1210;
-    v_out_mv = ((v_adc_mv - 1723) * 1000) / 130;
+
+    // напряжение на входе АЦП
+    int32_t v_adc_mv = (adc_cp * VREFINT_MV) / adc_vref;
+
+    // дальше твоя формула
+    int32_t v_out_mv = ((v_adc_mv - 1723) * 7704) / 1000;
 
     return v_out_mv;
 }
@@ -50,7 +47,7 @@ void CP_Init(void) {
 #endif
 
     HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_2);
-    HAL_TIM_OC_Start_IT(&htim3, TIM_CHANNEL_1);
+    HAL_TIM_OC_Start(&htim3, TIM_CHANNEL_1);
 }
 
 void CP_SetDuty(uint8_t percentage) {
@@ -71,11 +68,12 @@ uint8_t CP_GetDuty(void) {
 }
 
 int32_t CP_GetVoltage(void) {
+    cp_voltage_mv = CP_ReadVoltageMv();
     return cp_voltage_mv;
 }
 
 CP_State_t CP_GetState(void) {
-    int32_t voltage_real = cp_voltage_mv;
+    int32_t voltage_real = CP_GetVoltage();
 
     if(fake_cp_state != EV_STATE_ACQUIRING) {
         return fake_cp_state;
@@ -98,18 +96,66 @@ CP_State_t CP_GetState(void) {
     }
 }
 
-void CP_Loop(void) {
+CP_State_t CP_GetFilteredState(void) {
-    (void)CP_GetState();
+    return cp_state_buffer;
 }
 
-void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+void CP_FilterState(void) {
-{
+
-    if (htim->Instance == TIM3 && htim->Channel == HAL_TIM_ACTIVE_CHANNEL_1) {
+    static CP_State_t pending_state = EV_STATE_ACQUIRING;
-        if (ADC_TryLock() == 0u) {
+    static uint8_t stable_count = 0u;
+    CP_State_t current_state = CP_GetState();
+
+    /* Keep last accepted state while CP is still acquiring. */
+    if (current_state == EV_STATE_ACQUIRING) {
+        pending_state = EV_STATE_ACQUIRING;
+        stable_count = 0u;
         return;
     }
-        cp_voltage_mv = CP_ReadVoltageMv();
+
-        ADC_Unlock();
+    if (current_state != pending_state) {
+        pending_state = current_state;
+        stable_count = 1u;
+        return;
+    }
+
+    if (stable_count < FILTER_ORDER) {
+        stable_count++;
+    }
+
+    if (stable_count >= FILTER_ORDER) {
+        cp_state_buffer = pending_state;
+    }
+}
+
+void CP_Loop(void) {
+    static uint32_t tick;
+    if ((int32_t)(HAL_GetTick() - tick) < 1) return;
+    tick = HAL_GetTick();
+    static uint8_t initialized = 0;
+    static CP_State_t prev_state = EV_STATE_ACQUIRING;
+    static uint8_t prev_duty = 0;
+
+    CP_FilterState();
+
+    CP_State_t current_state = CP_GetFilteredState();
+    uint8_t current_duty = cp_duty;
+
+    if (!initialized) {
+        prev_state = current_state;
+        prev_duty = current_duty;
+        initialized = 1;
+        return;
+    }
+
+    if (current_state != prev_state) {
+        log_printf(LOG_INFO, "CP state changed: %d -> %d\n", prev_state, current_state);
+        prev_state = current_state;
+    }
+
+    if (current_duty != prev_duty) {
+        log_printf(LOG_INFO, "CP duty changed: %u -> %u\n", prev_duty, current_duty);
+        prev_duty = current_duty;
     }
 }
 

Core/Src/debug.c

@@ -148,218 +148,3 @@ int log_printf(LogLevel_t level, const char *format, ...)
 	return result;
 }
 
-#ifndef USE_WEB_INTERFACE
-
-extern UART_HandleTypeDef huart2;
-
-
-uint8_t  debug_rx_buffer[256];
-uint8_t debug_cmd_received;
-uint8_t debug_rx_buffer_size = 0;
-
-
-void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size){
-
-//	if(huart->Instance == USART1){
-//		mm_rx_interrupt(huart, Size);
-//	}
-	if(huart->Instance == USART2){
-		debug_rx_interrupt(huart, Size);
-	}
-}
-
-void debug_rx_interrupt(UART_HandleTypeDef *huart, uint16_t Size){
-	debug_rx_buffer[Size] = '\0';
-	debug_rx_buffer_size = Size;
-	debug_cmd_received = 1;
-}
-
-void debug_init(){
-	HAL_UARTEx_ReceiveToIdle_IT(&huart2,debug_rx_buffer,255);
-}
-
-void parse_command(uint8_t* buffer, size_t length) {
-	// ignore \r \n symbols
-    size_t i = 0;
-    for (i = 0; i < length; i++) {
-        if (buffer[i] == '\r' || buffer[i] == '\n') {
-            buffer[i] = '\0';
-            length = i;
-            break;
-        }
-    }
-    if (buffer[0] == 0) return;
-    if (strncmp((const char*)buffer, "reset", length) == 0) {
-        log_printf(LOG_INFO, "Resetting...\n");
-        NVIC_SystemReset();
-
-    } else if (strncmp((const char*)buffer, "relayaux", length) == 0) {
-        log_printf(LOG_INFO, "Relaying...\n");
-        RELAY_Write(RELAY_AUX, 1);
-        HAL_Delay(2000);
-        RELAY_Write(RELAY_AUX, 0);
-    } else if (strncmp((const char*)buffer, "relaycc", length) == 0) {
-        log_printf(LOG_INFO, "Relaying...\n");
-        RELAY_Write(RELAY_CC, 1);
-        HAL_Delay(200);
-        RELAY_Write(RELAY_CC, 0);
-    } else if (strncmp((const char*)buffer, "relaydc", length) == 0) {
-        log_printf(LOG_INFO, "Relaying...\n");
-        RELAY_Write(RELAY_DC, 1);
-        HAL_Delay(200);
-        RELAY_Write(RELAY_DC, 0);
-    } else if (strncmp((const char*)buffer, "relayac", length) == 0) {
-        log_printf(LOG_INFO, "Relaying...\n");
-        RELAY_Write(RELAY_AC, 1);
-        HAL_Delay(200);
-        RELAY_Write(RELAY_AC, 0);
-
-    } else if (strncmp((const char*)buffer, "adc", length) == 0) {
-        log_printf(LOG_INFO, "CC1=%.2f\n", CONN_CC_GetAdc());
-
-    } else if (strncmp((const char*)buffer, "lock_state", length) == 0) {
-        log_printf(LOG_INFO, "Lock state=%d\n", GBT_LockGetState());
-
-    } else if (strncmp((const char*)buffer, "lock_lock", length) == 0) {
-        log_printf(LOG_INFO, "Locked\n");
-        GBT_Lock(1);
-
-    } else if (strncmp((const char*)buffer, "lock_unlock", length) == 0) {
-        log_printf(LOG_INFO, "Unlocked\n");
-        GBT_Lock(0);
-
-    } else if (strncmp((const char*)buffer, "complete", length) == 0) {
-    	CONN_SetState(Finished);
-
-    } else if (strncmp((const char*)buffer, "start", length) == 0) {
-        log_printf(LOG_INFO, "Started\n");
-        GBT_Start();
-
-    } else if (strncmp((const char*)buffer, "stop", length) == 0) {
-        log_printf(LOG_INFO, "Stopped\n");
-        GBT_StopEVSE(GBT_CST_SUSPENDS_ARTIFICIALLY);
-
-    } else if (strncmp((const char*)buffer, "stop1", length) == 0) {
-        log_printf(LOG_INFO, "Stopped\n");
-        GBT_ForceStop();
-
-//    } else if (strncmp((const char*)buffer, "force", length) == 0) {
-//        log_printf(LOG_INFO, "Stopped\n");
-//		GBT_Lock(1);
-//		GBT_SwitchState(GBT_S2_LOCKED);
-//		GBT_Delay(500);
-
-    } else if (strncmp((const char*)buffer, "cc_state", length) == 0) {
-    	switch(CONN_CC_GetState()){
-    	case GBT_CC_UNKNOWN:
-    		log_printf(LOG_INFO, "GBT_CC_UNKNOWN\n");
-    		break;
-    	case GBT_CC_12V:
-    		log_printf(LOG_INFO, "GBT_CC_12V\n");
-    		break;
-    	case GBT_CC_6V:
-    		log_printf(LOG_INFO, "GBT_CC_6V\n");
-    		break;
-    	case GBT_CC_4V:
-    		log_printf(LOG_INFO, "GBT_CC_4V\n");
-    		break;
-    	case GBT_CC_2V:
-    		log_printf(LOG_INFO, "GBT_CC_2V\n");
-    		break;
-
-    	}
-    } else if (strncmp((const char*)buffer, "temp", length) == 0) {
-    	log_printf(LOG_INFO, "temp1 %d\n",GBT_ReadTemp(0));
-    	log_printf(LOG_INFO, "temp2 %d\n",GBT_ReadTemp(1));
-    } else if (strncmp((const char*)buffer, "info1", length) == 0) {
-        log_printf(LOG_INFO, "Battery info:\n");
-        log_printf(LOG_INFO, "maxCV %dV\n",GBT_BATStat.maxCellVoltage/100); 		// 0.01v/bit
-        log_printf(LOG_INFO, "maxCC %dA\n",GBT_BATStat.maxChargingCurrent/10); 	// 0.1A/bit
-        log_printf(LOG_INFO, "totE %dkWh\n",GBT_BATStat.totalEnergy/10); 			// 0.1kWh
-        log_printf(LOG_INFO, "maxCV %dV\n",GBT_BATStat.maxChargingVoltage/10); 	// 0.1V/ bit
-        log_printf(LOG_INFO, "maxT %dC\n",(int16_t)GBT_BATStat.maxTemp-50); 		// 1C/bit, -50C offset
-        log_printf(LOG_INFO, "SOC %dp\n",GBT_BATStat.SOC/10); 					// 0.1%/bit , 0..100%
-        log_printf(LOG_INFO, "Volt. %dV\n",GBT_BATStat.measVoltage/10); 			// 0.1V/bit
-
-    } else if (strncmp((const char*)buffer, "info2", length) == 0) {
-        log_printf(LOG_INFO, "EV info:\n");
-        log_printf(LOG_INFO, "GBT_ver V%d.%d%d\n",GBT_EVInfo.version[0],GBT_EVInfo.version[1],GBT_EVInfo.version[2]);
-        log_printf(LOG_INFO, "Battery type: %d\n",GBT_EVInfo.batteryType);
-        log_printf(LOG_INFO, "Battery capacity: %d\n", GBT_EVInfo.batteryCapacity);	// 0.1Ah/bit
-    	log_printf(LOG_INFO, "Battery voltage: %d\n", GBT_EVInfo.batteryVoltage);  	// 0.1V/bit
-    	log_printf(LOG_INFO, "Battery vendor: %.4s\n", GBT_EVInfo.batteryVendor); 	// Battery vendor (ASCII string)
-    	log_printf(LOG_INFO, "Battery SN: %lu\n", GBT_EVInfo.batterySN);			// int
-    	log_printf(LOG_INFO, "Battery manufacture date: %02d.%02d.%04d\n", GBT_EVInfo.batteryManuD, GBT_EVInfo.batteryManuM ,GBT_EVInfo.batteryManuY+1985);		// year (offset 1985)
-    	log_printf(LOG_INFO, "Battery cycles: %d\n", GBT_EVInfo.batteryCycleCount); //uint24_t
-    	log_printf(LOG_INFO, "Own auto: %d\n", GBT_EVInfo.ownAuto);			// 0 = lizing, 1 = own auto
-    	log_printf(LOG_INFO, "EVIN: %.17s\n", GBT_EVInfo.EVIN);			//EVIN
-    	log_printf(LOG_INFO, "EV_SW_VER: %.8s\n", GBT_EVInfo.EV_SW_VER);
-
-    } else if (strncmp((const char*)buffer, "info3", length) == 0) {
-        log_printf(LOG_INFO, "GBT_MaxLoad info:\n");
-        log_printf(LOG_INFO, "Output max current: %d\n",GBT_MaxLoad.maxOutputCurrent);
-        log_printf(LOG_INFO, "Output min current: %d\n",GBT_MaxLoad.minOutputCurrent);
-        log_printf(LOG_INFO, "Output max voltage: %d\n",GBT_MaxLoad.maxOutputVoltage);
-        log_printf(LOG_INFO, "Output min voltage: %d\n",GBT_MaxLoad.minOutputVoltage);
-        log_printf(LOG_INFO, "\nGBT_ChargerInfo info:\n");
-        log_printf(LOG_INFO, "BMS Recognized: %d\n",GBT_ChargerInfo.bmsIdentified);
-        log_printf(LOG_INFO, "Charger location: %.3s\n",GBT_ChargerInfo.chargerLocation);
-        log_printf(LOG_INFO, "Charger number: %lu\n",GBT_ChargerInfo.chargerNumber);
-
-
-    } else if (strncmp((const char*)buffer, "help", length) == 0) {
-        log_printf(LOG_INFO, "Command list:\n");
-        log_printf(LOG_INFO, "reset\n");
-        log_printf(LOG_INFO, "help\n");
-        log_printf(LOG_INFO, "cc_state\n");
-        log_printf(LOG_INFO, "lock_lock\n");
-        log_printf(LOG_INFO, "lock_unlock\n");
-        log_printf(LOG_INFO, "lock_state\n");
-        log_printf(LOG_INFO, "adc\n");
-        log_printf(LOG_INFO, "relay(cc,aux,ac,dc)\n");
-        log_printf(LOG_INFO, "start\n");
-        log_printf(LOG_INFO, "stop\n");
-        log_printf(LOG_INFO, "stop1\n");
-//        log_printf(LOG_INFO, "force\n");
-        log_printf(LOG_INFO, "temp\n");
-        log_printf(LOG_INFO, "info1\n");
-        log_printf(LOG_INFO, "info2\n");
-        log_printf(LOG_INFO, "info3\n");
-        log_printf(LOG_INFO, "time\n");
-        log_printf(LOG_INFO, "cantest\n");
-
-        //TODO: info commands
-
-    } else if (strncmp((const char*)buffer, "time", length) == 0) {
-
-		time_t unix_time = (time_t)get_Current_Time();
-		struct tm *parts = localtime(&unix_time);
-
-		log_printf(LOG_INFO, "Year: %d\n", parts->tm_year + 1900);
-		log_printf(LOG_INFO, "Month: %d\n", parts->tm_mon + 1);
-		log_printf(LOG_INFO, "Day: %d\n", parts->tm_mday);
-		log_printf(LOG_INFO, "Hour: %d\n", parts->tm_hour);
-		log_printf(LOG_INFO, "Minute: %d\n", parts->tm_min);
-		log_printf(LOG_INFO, "Second: %d\n", parts->tm_sec);
-
-    } else if (strncmp((const char*)buffer, "cantest", length) == 0) {
-    	//GBT_SendCHM();
-    	GBT_Error(0xFDF0C0FC); //BRM Timeout
-        log_printf(LOG_INFO, "can test\n");
-
-    } else {
-        log_printf(LOG_INFO, "Unknown command\n");
-    }
-}
-
-void debug_task(){
-	if(debug_cmd_received){
-		parse_command(debug_rx_buffer, debug_rx_buffer_size);
-		HAL_UARTEx_ReceiveToIdle_IT(&huart2,debug_rx_buffer,255);
-		debug_cmd_received = 0;
-	}
-}
-
-#else
-
-#endif // USE_WEB_INTERFACE

Core/Src/dma.c

@@ -0,0 +1,67 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    dma.c
+  * @brief   This file provides code for the configuration
+  *          of all the requested memory to memory DMA transfers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "dma.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure DMA                                                              */
+/*----------------------------------------------------------------------------*/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+  * Enable DMA controller clock
+  */
+void MX_DMA_Init(void)
+{
+
+  /* DMA controller clock enable */
+  __HAL_RCC_DMA1_CLK_ENABLE();
+
+  /* DMA interrupt init */
+  /* DMA1_Channel1_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 1, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+  /* DMA1_Channel2_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel2_IRQn, 4, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel2_IRQn);
+  /* DMA1_Channel3_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel3_IRQn, 1, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel3_IRQn);
+  /* DMA1_Channel6_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 1, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);
+  /* DMA1_Channel7_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel7_IRQn, 4, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel7_IRQn);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */
+

Core/Src/gpio.c

@@ -54,20 +54,27 @@ void MX_GPIO_Init(void)
   __HAL_RCC_GPIOD_CLK_ENABLE();
 
   /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOC, RELAY_CP_Pin|LOCK_A_Pin|LOCK_B_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(GPIOC, DBG1_Pin|RELAY_CP_Pin|LOCK_A_Pin|LOCK_B_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOA, DBG2_Pin|DBG3_Pin|RELAY_CC_Pin, GPIO_PIN_RESET);
 
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOE, RELAY1_Pin|RELAY2_Pin|RELAY3_Pin|RELAY4_Pin
                           |RELAY5_Pin, GPIO_PIN_RESET);
 
   /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(RELAY_CC_GPIO_Port, RELAY_CC_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(GPIOB, DBG5_Pin|DBG4_Pin|EE_WP_Pin, GPIO_PIN_RESET);
 
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOD, RELAY_DC_Pin|USART2_DIR_Pin, GPIO_PIN_RESET);
 
-  /*Configure GPIO pin Output Level */
+  /*Configure GPIO pin : DBG1_Pin */
-  HAL_GPIO_WritePin(EE_WP_GPIO_Port, EE_WP_Pin, GPIO_PIN_RESET);
+  GPIO_InitStruct.Pin = DBG1_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(DBG1_GPIO_Port, &GPIO_InitStruct);
 
   /*Configure GPIO pins : RELAY_CP_Pin LOCK_A_Pin LOCK_B_Pin */
   GPIO_InitStruct.Pin = RELAY_CP_Pin|LOCK_A_Pin|LOCK_B_Pin;
@@ -88,6 +95,13 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Pull = GPIO_PULLDOWN;
   HAL_GPIO_Init(IN_SW1_GPIO_Port, &GPIO_InitStruct);
 
+  /*Configure GPIO pins : DBG2_Pin DBG3_Pin */
+  GPIO_InitStruct.Pin = DBG2_Pin|DBG3_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
   /*Configure GPIO pins : IN0_Pin AC_OK_Pin ISO_IN_Pin */
   GPIO_InitStruct.Pin = IN0_Pin|AC_OK_Pin|ISO_IN_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@@ -103,6 +117,13 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
+  /*Configure GPIO pins : DBG5_Pin DBG4_Pin */
+  GPIO_InitStruct.Pin = DBG5_Pin|DBG4_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
   /*Configure GPIO pin : RELAY_CC_Pin */
   GPIO_InitStruct.Pin = RELAY_CC_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;

Core/Src/main.c

@@ -5,6 +5,7 @@
 #include "adc.h"
 #include "can.h"
 #include "crc.h"
+#include "dma.h"
 #include "rtc.h"
 #include "tim.h"
 #include "usart.h"
@@ -96,7 +97,8 @@ void ED_Delay(uint32_t Delay)
 
   while ((HAL_GetTick() - tickstart) < wait){
     CCS_SerialLoop();
-//    CP_Loop();
+    StopButtonControl();
+    CP_Loop();
     CONN_Task();
     LED_Task();
     SC_Task();
@@ -104,12 +106,44 @@ void ED_Delay(uint32_t Delay)
 }
 
 void StopButtonControl(){
+	static uint32_t tick;
+	static uint32_t hold_time;
+	static uint8_t stop_btn_fault = 1;
+	uint32_t now = HAL_GetTick();
 
-	//Charging do nothing
+	/* Run no faster than once per 10 ms. */
-	if(!IN_ReadInput(IN_ESTOP)){
+	if((now - tick) < 10){
-		CONN.connControl = CMD_STOP;
+		return;
+	}
+	tick = now;
+
+	uint8_t pressed = !IN_ReadInput(IN_ESTOP);
+	if(!pressed){
+		stop_btn_fault = 0;
 	}
 
+	if(stop_btn_fault){
+		return;
+	}
+
+	if(pressed){
+		if(hold_time == 0){
+			CONN.connControl = CMD_STOP;
+		}
+		hold_time += 10;
+		if(hold_time == 5000){
+			CONN.connControl = CMD_FORCE_UNLOCK;
+		}
+		if(hold_time > 40000){
+			SC_SendPacket(NULL, 0, RESP_SUCCESS);
+			while(huart2.gState == HAL_UART_STATE_BUSY_TX);
+			HAL_Delay(10);
+			NVIC_SystemReset();
+		}
+	}
+	else{
+		hold_time = 0;
+	}
 }
 
 uint8_t temp0, temp1;
@@ -136,6 +170,7 @@ int main(void)
 {
 
   /* USER CODE BEGIN 1 */
+
 	VectorBase_Config();
   /* USER CODE END 1 */
 
@@ -157,6 +192,7 @@ int main(void)
 
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
+  MX_DMA_Init();
   MX_ADC1_Init();
   MX_CAN1_Init();
   MX_CAN2_Init();
@@ -202,8 +238,6 @@ int main(void)
     CONN_Loop();
     LED_Write();
     ED_Delay(10);
-    StopButtonControl();
-    ED_Delay(50);
 
   }
   /* USER CODE END 3 */

Core/Src/psu_control.c

@@ -8,6 +8,7 @@
 #include "charger_control.h"
 #include "board.h"
 #include "debug.h"
+#include "isr_opt.h"
 
 PSU_02_t PSU_02;
 PSU_04_t PSU_04;
@@ -39,7 +40,7 @@ static uint32_t PSU_StateTime(void){
 	return HAL_GetTick() - PSU0.statetick;
 }
 
-void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan){
+ISR_FAST void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan){
 
 	static CAN_RxHeaderTypeDef RxHeader;
 	static uint8_t RxData[8] = {0,};
@@ -149,6 +150,7 @@ void PSU_Init(){
 
 	PSU0.power_limit = PSU_MAX_POWER; // kW
 	PSU0.hv_mode     = 0;
+	PSU0.hv_tick     = 0;
 
 	PSU_Enable(0, 0);
 }
@@ -261,11 +263,22 @@ void PSU_ReadWrite(){
 	}
 	CONN.RequestedPower = CONN.RequestedCurrent * CONN.RequestedVoltage / 10;
 
-
 	if(PSU0.ready){
+		if (CONN.RequestedVoltage == 500) { // fake
+			PSU_SetVoltageCurrent(0, 300, 10); // Normal mode
+		}else{
 			PSU_SetVoltageCurrent(0, CONN.RequestedVoltage, CONN.RequestedCurrent); // Normal mode
+		}
 		ED_Delay(CAN_DELAY);
-		if(CONN.MeasuredVoltage>490) PSU0.hv_mode = 1;
+		if(CONN.MeasuredVoltage > 490){
+			if(PSU0.hv_tick == 0){
+				PSU0.hv_tick = HAL_GetTick();
+			}else if((HAL_GetTick() - PSU0.hv_tick) >= 10000){
+				PSU0.hv_mode = 1;
+			}
+		}else{
+			PSU0.hv_tick = 0;
+		}
 	}
 
 	// PSU_SetHVMode(0, PSU0.hv_mode); // auto set, no need
@@ -339,6 +352,7 @@ void PSU_Task(void){
 	case PSU_READY:
 		// модуль готов, но выключен
 		PSU0.hv_mode = 0;
+		PSU0.hv_tick = 0;
 
 		RELAY_Write(RELAY_DC, 0);
 		if(!PSU0.ready){

Core/Src/rgb_controller.c

@@ -2,6 +2,7 @@
 #include "main.h"
 #include "string.h"
 #include "charger_control.h"
+#include "board.h"
 
 #include "tim.h"
 
@@ -10,11 +11,20 @@ RGB_Cycle_t LED_Cycle;
 
 RGB_Cycle_t color_estop = {
 	.Color1 = { .R = 250, .G = 0, .B = 0 },
-	.Color2 = { .R = 250, .G = 0, .B = 0 },
+	.Color2 = { .R = 0, .G = 0, .B = 0 },
-	.Tr = 50,
+	.Tr = 10,
-	.Th = 50,
+	.Th = 5,
-	.Tf = 50,
+	.Tf = 10,
-	.Tl = 50,
+	.Tl = 5,
+ };
+
+RGB_Cycle_t color_unlock = {
+	.Color1 = { .R = 255, .G = 0, .B = 0 },
+	.Color2 = { .R = 0, .G = 0, .B = 0 },
+	.Tr = 10,
+	.Th = 10,
+	.Tf = 10,
+	.Tl = 10,
  };
 
 RGB_Cycle_t color_unknown = {
@@ -54,12 +64,12 @@ RGB_Cycle_t color_unplugged = {
 };
 
 RGB_Cycle_t color_preparing = {
-	.Color1 = { .R = 0, .G = 0, .B = 250 },
+	.Color1 = { .R = 0, .G = 0, .B = 255 },
-	.Color2 = { .R = 0, .G = 0, .B = 250 },
+	.Color2 = { .R = 0, .G = 0, .B = 0 },
-	.Tr = 50,
+	.Tr = 10,
 	.Th = 10,
-	.Tf = 50,
+	.Tf = 10,
-	.Tl = 0,
+	.Tl = 10,
 };
 
 RGB_Cycle_t color_charging = {
@@ -94,6 +104,14 @@ void LED_Write(){
       LED_SetColor(&color_error);
       return;
     }
+    if(CONN.connControl == CMD_FORCE_UNLOCK){
+      LED_SetColor(&color_unlock);
+      return;
+    }
+    if(CONN.connControl == CMD_STOP){
+      LED_SetColor(&color_estop);
+      return;
+    }
     switch(CONN.connState){
     case Unknown:
       LED_SetColor(&color_unknown);

Core/Src/serial.c

@@ -3,12 +3,15 @@
 #include "connector.h"
 #include "board.h"
 #include "debug.h"
+#include "isr_opt.h"
 #include <stdint.h>
 #include <string.h>
 #include "charger_config.h"
 #include "psu_control.h"
+#include "serial_control.h"
 
 extern UART_HandleTypeDef huart3;
+extern uint8_t config_initialized;
 
 static void send_state(void);
 static void CCS_SendResetReason(void);
@@ -27,10 +30,19 @@ uint8_t ev_enable_output = 0;
 #define CMD_INTERVAL 10
 #define MAX_TX_BUFFER_SIZE 256
 #define MAX_RX_BUFFER_SIZE 256
+#define EVEREST_TIMEOUT_WARN_MS 5000u
+#define EVEREST_TIMEOUT_STOP_MS 10000u
+#define UART3_REINIT_TIMEOUT_MS 1500u
+/* Everest requests 500 V -> PSU really gets 300 V / 1 A, state still reports 500 V. */
+#define FAKE_EVREQ_VOLTAGE_V   500u
+#define FAKE_PSU_VOLTAGE_V     300u
+#define FAKE_PSU_CURRENT_0P1A   10u
 
 static uint8_t rx_buffer[MAX_RX_BUFFER_SIZE];
 static uint8_t tx_buffer[MAX_TX_BUFFER_SIZE];
-static uint8_t rx_armed = 0;
+static uint8_t tx_pending_buffer[MAX_TX_BUFFER_SIZE];
+static uint16_t tx_pending_len = 0;
+static uint8_t uart3_tx_busy = 0;
 
 uint8_t ESTOP = 0;
 uint8_t REPLUG = 0;
@@ -39,46 +51,159 @@ static uint8_t enabled = 0;
 static uint8_t pwm_duty_percent = 100;
 uint8_t isolation_enable = 0;
 static uint32_t last_host_seen = 0;
-static CP_State_t cp_state_buffer = EV_STATE_ACQUIRING;
+static uint8_t fake_500_voltage_mode = 0;
+static uint8_t everest_timed_out = 0;
+static uint8_t everest_timeout_warn_latched = 0;
+static uint8_t everest_timeout_stop_latched = 0;
+static uint32_t uart3_last_packet_tick = 0;
+static uint32_t uart3_last_reinit_tick = 0;
 
 CCS_State_t CCS_State;
 CCS_EvInfo_t CCS_EvInfo;
 CONN_State_t CCS_EvseState;
-CCS_ConnectorState_t CCS_ConnectorState = CCS_UNPLUGGED;
+CCS_ConnectorState_t CCS_ConnectorState = CCS_UNKNOWN;
 
-static uint8_t process_received_packet(const uint8_t* packet, uint16_t packet_len);
+ISR_FAST static uint8_t process_received_packet(const uint8_t* packet, uint16_t packet_len);
+static void CCS_UART3_Watchdog(void);
+static void CCS_LogUart3Error(const char *tag);
 
-void CCS_RxEventCallback(UART_HandleTypeDef *huart, uint16_t size) {
+ISR_FAST static void uart3_log_hal_error(uint8_t uart_num, uint32_t err) {
+    if (err == HAL_UART_ERROR_NONE) {
+        log_printf(LOG_ERR, "UART%u HAL error decode: NONE\n", uart_num);
+        return;
+    }
+    log_printf(LOG_ERR, "UART%u HAL error decode: %s%s%s%s%s%s raw=0x%08lx\n",
+               uart_num,
+               (err & HAL_UART_ERROR_PE) ? "PE " : "",
+               (err & HAL_UART_ERROR_NE) ? "NE " : "",
+               (err & HAL_UART_ERROR_FE) ? "FE " : "",
+               (err & HAL_UART_ERROR_ORE) ? "ORE " : "",
+               (err & HAL_UART_ERROR_DMA) ? "DMA " : "",
+#ifdef HAL_UART_ERROR_INVALID_CALLBACK
+               (err & HAL_UART_ERROR_INVALID_CALLBACK) ? "INV_CB " : "",
+#else
+               "",
+#endif
+               (unsigned long)err);
+}
+
+ISR_FAST static void uart3_arm_rx_or_log(const char *where) {
+    HAL_StatusTypeDef st = HAL_UARTEx_ReceiveToIdle_DMA(&huart3, rx_buffer, sizeof(rx_buffer));
+    if (st == HAL_OK) {
+        return;
+    }
+    uint32_t err_after = HAL_UART_GetError(&huart3);
+    log_printf(LOG_ERR,
+               "UART3 RX arm failed (%s): HAL_Status=%d err_after=0x%08lx\n",
+               where, (int)st, (unsigned long)err_after);
+    uart3_log_hal_error(3u, err_after);
+    CCS_LogUart3Error("UART3 RX arm failed details");
+    if (err_after != HAL_UART_ERROR_NONE) {
+        (void)HAL_UART_AbortReceive(&huart3);
+    }
+}
+
+ISR_FAST void CCS_RxEventCallback(UART_HandleTypeDef *huart, uint16_t size) {
+    if (huart != &huart3) {
+        log_printf(LOG_WARN, "UART3 RX drop: wrong huart in RxEventCallback (size=%u)\n",
+                   (unsigned)size);
+        return;
+    }
+    if (size == 0u) {
+        log_printf(LOG_WARN, "UART3 RX drop: RxEvent size=0 (idle, no payload)\n");
+        uart3_arm_rx_or_log("RxEventCallback");
+        return;
+    }
+    if (size > sizeof(rx_buffer)) {
+        log_printf(LOG_ERR, "UART3 RX drop: size=%u > rx_buffer %u (overflow, not parsed)\n",
+                   (unsigned)size, (unsigned)sizeof(rx_buffer));
+        uart3_arm_rx_or_log("RxEventCallback");
+        return;
+    }
+    uart3_last_packet_tick = HAL_GetTick();
+    uart3_last_reinit_tick = uart3_last_packet_tick;
+    process_received_packet(rx_buffer, size);
+    uart3_arm_rx_or_log("RxEventCallback");
+}
+
+ISR_FAST void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) {
+    uint32_t error = HAL_UART_GetError(huart);
+    uint8_t uart_num =
+        (huart == &huart2) ? 2 :
+        (huart == &huart3) ? 3 :
+        (huart == &huart5) ? 5 : 0;
+    log_printf(LOG_ERR,
+               "UART%u HAL error (ISR): raw=0x%08lx — RX may be corrupted until re-arm\n",
+               uart_num, (unsigned long)error);
+    uart3_log_hal_error(uart_num, error);
+    (void)HAL_UART_AbortReceive(huart);
+    (void)HAL_UART_AbortTransmit(huart);
+    if (huart == &huart3) {
+        uart3_tx_busy = 0;
+        uart3_arm_rx_or_log("ErrorCallback");
+    } else {
+        SC_RecoverUartDma(huart);
+    }
+}
+
+void CCS_TxCpltCallback(UART_HandleTypeDef *huart) {
     if (huart != &huart3) {
         return;
     }
-    rx_armed = 0;
+    uart3_tx_busy = 0;
-    if (size > 0 && size <= sizeof(rx_buffer)) {
+    if (tx_pending_len > 0) {
-        process_received_packet(rx_buffer, size);
+        memcpy(tx_buffer, tx_pending_buffer, tx_pending_len);
+        uart3_tx_busy = 1;
+        if (HAL_UART_Transmit_DMA(&huart3, tx_buffer, tx_pending_len) != HAL_OK) {
+            uart3_tx_busy = 0;
+            CCS_LogUart3Error("UART3 TX DMA resend failed");
+        }
+        tx_pending_len = 0;
     }
 }
 
 void CCS_SerialLoop(void) {
+    static uint32_t tick;
+    if ((int32_t)(HAL_GetTick() - tick) < 1) return;
+    tick = HAL_GetTick();
+    
     static uint32_t replug_tick = 0;
     static uint32_t replug_watchdog_tick = 0;
     static uint32_t replug_watchdog1_tick = 0;
     static uint32_t last_state_sent = 0;
+    static uint32_t force_unlock_tick = 0;
+    static uint32_t stop_tick = 0;
 
-    if (!rx_armed && HAL_UART_GetState(&huart3) == HAL_UART_STATE_READY) {
+    CCS_UART3_Watchdog();
-        if (HAL_UARTEx_ReceiveToIdle_IT(&huart3, rx_buffer, sizeof(rx_buffer)) == HAL_OK) {
-            rx_armed = 1;
-        }
-    }
-
-    /* Read CP once per loop and use buffered value below. */
-    cp_state_buffer = CP_GetState();
 
     if (CONN.connControl != CMD_NONE) {
         last_cmd = CONN.connControl;
     }
 
-    if((HAL_GetTick() - last_cmd_sent) > CMD_INTERVAL){
+    if (CONN.connControl == CMD_FORCE_UNLOCK) {
-        if ((HAL_GetTick() - last_state_sent) >= 200) {
+        if (force_unlock_tick == 0) {
+            force_unlock_tick = HAL_GetTick();
+        } else if ((int32_t)(HAL_GetTick() - force_unlock_tick) >= 10000) {
+            CONN.connControl = CMD_NONE;
+            force_unlock_tick = 0;
+        }
+    } else {
+        force_unlock_tick = 0;
+    }
+
+    if (CONN.connControl == CMD_STOP) {
+        if (stop_tick == 0) {
+            stop_tick = HAL_GetTick();
+        } else if ((int32_t)(HAL_GetTick() - stop_tick) >= 1000) {
+            CONN.connControl = CMD_NONE;
+            stop_tick = 0;
+        }
+    } else {
+        stop_tick = 0;
+    }
+
+    if((int32_t)(HAL_GetTick() - last_cmd_sent) > (int32_t)CMD_INTERVAL){
+        if ((int32_t)(HAL_GetTick() - last_state_sent) >= 200) {
             send_state();
             last_state_sent = HAL_GetTick();
         }
@@ -90,15 +215,19 @@ void CCS_SerialLoop(void) {
         }
 
         if (((CONN.connControl == CMD_STOP) ||
+             (CONN.connControl == CMD_FORCE_UNLOCK) ||
              (CONN.chargingError != CONN_NO_ERROR)) &&
-            ((HAL_GetTick() - last_stop_sent) > 1000)) {
+            ((int32_t)(HAL_GetTick() - last_stop_sent) > 1000)) {
             last_stop_sent = HAL_GetTick();
             log_printf(LOG_WARN, "Stopping charging...\n");
+            if (CONN.connControl == CMD_FORCE_UNLOCK) {
+                CP_SetDuty(100);
+            }
             CCS_SendEmergencyStop();
         }
 
         if (((CCS_EvseState == FinishedEV) || (CCS_EvseState == FinishedEVSE)) &&
-            ((HAL_GetTick() - last_stop_sent) > 1000)) {
+            ((int32_t)(HAL_GetTick() - last_stop_sent) > 1000)) {
             last_stop_sent = HAL_GetTick();
             log_printf(LOG_WARN, "FinishedEV, stopping...\n");
             CCS_SendEmergencyStop();
@@ -108,11 +237,38 @@ void CCS_SerialLoop(void) {
     (void)replug_watchdog_tick;
     (void)replug_watchdog1_tick;
 
+    uint8_t host_timeout_warn = (last_host_seen > 0u) && ((int32_t)(HAL_GetTick() - last_host_seen) > (int32_t)EVEREST_TIMEOUT_WARN_MS);
+    uint8_t host_timeout_stop = (last_host_seen > 0u) && ((int32_t)(HAL_GetTick() - last_host_seen) > (int32_t)EVEREST_TIMEOUT_STOP_MS);
+    uint8_t host_timed_out = host_timeout_stop;
+
+    if (host_timeout_warn && !everest_timeout_warn_latched) {
+        log_printf(LOG_ERR, "Everest timeout\n");
+        everest_timeout_warn_latched = 1;
+    }
+
+    if (host_timeout_stop && !everest_timeout_stop_latched) {
+        log_printf(LOG_ERR, "Everest timeout, stopping charging...\n");
+        everest_timeout_stop_latched = 1;
+    }
+
+    if (!host_timeout_warn) {
+        everest_timeout_warn_latched = 0;
+        everest_timeout_stop_latched = 0;
+    }
+
+    everest_timed_out = host_timeout_stop;
     switch(CCS_ConnectorState){
+            case CCS_UNKNOWN:
+                RELAY_Write(RELAY_CP, 0);
+                CONN_SetState(Unknown);
+                if (config_initialized && !host_timed_out) {
+                    CCS_ConnectorState = CCS_UNPLUGGED;
+                }
+                break;
             case CCS_DISABLED:
                 RELAY_Write(RELAY_CP, 0);
                 CONN_SetState(Disabled);
-            if (CONN.chargingError == CONN_NO_ERROR){
+                if ((CONN.chargingError == CONN_NO_ERROR) && !host_timed_out){
                     CCS_ConnectorState = CCS_UNPLUGGED;
                 }
                 break;
@@ -142,7 +298,7 @@ void CCS_SerialLoop(void) {
                 break;
             case CCS_CONNECTED:
                 RELAY_Write(RELAY_CP, 1);
-            if(CCS_EvseState < Preparing) {
+                if((CCS_EvseState < Preparing) || (CCS_EvseState == AuthRequired)) {
                     CONN_SetState(Preparing);
                 } else {
                     CONN_SetState(CCS_EvseState);
@@ -159,7 +315,7 @@ void CCS_SerialLoop(void) {
             case CCS_REPLUGGING:
                 RELAY_Write(RELAY_CP, 0);
                 CONN_SetState(Replugging);
-            if((HAL_GetTick() - replug_tick) > 1000){
+                if((int32_t)(HAL_GetTick() - replug_tick) > 1000){
                     replug_tick = HAL_GetTick();
                     if(REPLUG > 0){
                         if (REPLUG != 0xFF) REPLUG--;
@@ -178,11 +334,14 @@ void CCS_SerialLoop(void) {
                 break;
     }
 
-    if (last_host_seen > 0 && (HAL_GetTick() - last_host_seen) > 500) {
+    // 10s timeout: enforce safe-state until host communication recovers.
+    if (host_timeout_stop) {
         CONN.EnableOutput = 0;
         CCS_EvseState = Unknown;
         CP_SetDuty(100);
-        log_printf(LOG_ERR, "Everest timeout\n");
+        if (CCS_ConnectorState != CCS_DISABLED && CCS_ConnectorState != CCS_UNKNOWN) {
+            CCS_ConnectorState = CCS_DISABLED;
+        }
     } else {
         if (last_cmd == CMD_STOP) {
             CONN.EnableOutput = 0;
@@ -211,11 +370,14 @@ void CCS_Init(void){
 	CCS_MaxLoad.maxCurrent = PSU_MAX_CURRENT*10; //100A
 	CCS_MaxLoad.minCurrent = PSU_MIN_CURRENT*10; //1A
 	CCS_MaxLoad.maxPower = PSU_MAX_POWER; //30000W
+    uart3_last_packet_tick = HAL_GetTick();
+    uart3_last_reinit_tick = uart3_last_packet_tick;
+    uart3_arm_rx_or_log("Init");
     CCS_SendResetReason();
     log_printf(LOG_INFO, "CCS init\n");
 }
 
-static uint16_t crc16_ibm(const uint8_t* data, uint16_t length) {
+ISR_FAST static uint16_t crc16_ibm(const uint8_t* data, uint16_t length) {
     uint16_t crc = 0xFFFFu;
     for (uint16_t i = 0; i < length; i++) {
         crc ^= data[i];
@@ -249,7 +411,16 @@ static uint16_t CCS_BuildPacket(uint8_t cmd, const void* payload, uint16_t paylo
 static void CCS_SendPacket(uint8_t cmd, const void* payload, uint16_t payload_len) {
     uint16_t len = CCS_BuildPacket(cmd, payload, payload_len, tx_buffer, sizeof(tx_buffer));
     if (len > 0) {
-        HAL_UART_Transmit(&huart3, tx_buffer, len, 1000);
+        if (uart3_tx_busy) {
+            memcpy(tx_pending_buffer, tx_buffer, len);
+            tx_pending_len = len;
+        } else {
+            uart3_tx_busy = 1;
+            if (HAL_UART_Transmit_DMA(&huart3, tx_buffer, len) != HAL_OK) {
+                uart3_tx_busy = 0;
+                CCS_LogUart3Error("UART3 TX DMA start failed");
+            }
+        }
     }
     last_cmd_sent = HAL_GetTick();
 }
@@ -287,6 +458,9 @@ static void send_state(void) {
     CCS_State.DutyCycle = CP_GetDuty();
     CCS_State.OutputEnabled = PSU0.CONT_enabled;
     CCS_State.MeasuredVoltage = (uint16_t)CONN.MeasuredVoltage;
+    if (fake_500_voltage_mode) {
+        CCS_State.MeasuredVoltage = FAKE_EVREQ_VOLTAGE_V;
+    }
     CCS_State.MeasuredCurrent = (uint16_t)CONN.MeasuredCurrent;
     CCS_State.Power = CCS_Power;
     CCS_State.Energy = CCS_Energy;
@@ -308,7 +482,7 @@ static void send_state(void) {
     CCS_SendPacket(CMD_M2E_STATE, &CCS_State, sizeof(CCS_State));
 }
 
-static uint16_t expected_payload_len(uint8_t cmd) {
+ISR_FAST static uint16_t expected_payload_len(uint8_t cmd) {
     switch (cmd) {
         case CMD_E2M_PWM_DUTY:           return sizeof(e2m_pwm_duty_t);
         case CMD_E2M_ENABLE_OUTPUT:      return sizeof(e2m_enable_output_t);
@@ -324,16 +498,21 @@ static uint16_t expected_payload_len(uint8_t cmd) {
     }
 }
 
-static void apply_command(uint8_t cmd, const uint8_t* payload, uint16_t payload_len) {
+ISR_FAST static void apply_command(uint8_t cmd, const uint8_t* payload, uint16_t payload_len) {
     (void)payload_len;
     last_host_seen = HAL_GetTick();
+    everest_timed_out = 0;
+    everest_timeout_warn_latched = 0;
+    everest_timeout_stop_latched = 0;
     switch (cmd) {
         case CMD_E2M_PWM_DUTY: {
             const e2m_pwm_duty_t* p = (const e2m_pwm_duty_t*)payload;
             uint8_t duty = p->pwm_duty_percent;
             if (duty > 100) duty = 100;
             pwm_duty_percent = duty;
+            if (CONN.connControl != CMD_FORCE_UNLOCK) {
                 CP_SetDuty(duty);
+            }
             break;
         }
         case CMD_E2M_ENABLE_OUTPUT: {
@@ -345,9 +524,9 @@ static void apply_command(uint8_t cmd, const uint8_t* payload, uint16_t payload_
             const e2m_reset_t* p = (const e2m_reset_t*)payload;
             if (p->reset) {
                 log_printf(LOG_WARN, "Everest reset command\n");
-                CCS_SendResetReason();
+                // CCS_SendResetReason();
-                HAL_Delay(10);
+                // HAL_Delay(10);
-                NVIC_SystemReset();
+                // NVIC_SystemReset();
             }
             break;
         }
@@ -359,8 +538,15 @@ static void apply_command(uint8_t cmd, const uint8_t* payload, uint16_t payload_
         }
         case CMD_E2M_SET_OUTPUT_VOLTAGE: {
             const e2m_set_output_t* p = (const e2m_set_output_t*)payload;
+            if (p->voltage_V == FAKE_EVREQ_VOLTAGE_V) {
+                fake_500_voltage_mode = 1u;
+                CONN.RequestedVoltage = FAKE_PSU_VOLTAGE_V;
+                CONN.WantedCurrent = FAKE_PSU_CURRENT_0P1A;
+            } else {
+                fake_500_voltage_mode = 0u;
                 CONN.RequestedVoltage = p->voltage_V;
                 CONN.WantedCurrent = p->current_0p1A;
+            }
             break;
         }
         case CMD_E2M_ISOLATION_CONTROL: {
@@ -387,32 +573,54 @@ static void apply_command(uint8_t cmd, const uint8_t* payload, uint16_t payload_
             break;
         }
         default:
+            log_printf(LOG_WARN,
+                       "UART3 RX warn: cmd 0x%02x CRC/len OK but no switch case (expected_payload vs apply_command)\n",
+                       cmd);
             break;
     }
 }
 
-static uint8_t process_received_packet(const uint8_t* packet, uint16_t packet_len) {
+ISR_FAST static uint8_t process_received_packet(const uint8_t* packet, uint16_t packet_len) {
-    if (packet_len < 3) return 0;
+    if (packet_len < 3u) {
+        if (packet_len == 0u) {
+            log_printf(LOG_WARN, "UART3 RX drop: too_short len=0 (empty chunk)\n");
+        } else if (packet_len == 1u) {
+            log_printf(LOG_WARN, "UART3 RX drop: too_short len=1 b0=0x%02x\n", packet[0]);
+        } else {
+            log_printf(LOG_WARN, "UART3 RX drop: too_short len=2 b0=0x%02x b1=0x%02x\n",
+                       packet[0], packet[1]);
+        }
+        return 0;
+    }
 
     uint8_t cmd = packet[0];
-    uint16_t payload_len = (uint16_t)(packet_len - 3);
+    uint16_t payload_len = (uint16_t)(packet_len - 3u);
 
     uint16_t received_crc = (uint16_t)packet[packet_len - 2u] |
                             (uint16_t)packet[packet_len - 1u] << 8;
 
-    uint16_t calculated_crc = crc16_ibm(packet, (uint16_t)(1 + payload_len));
+    uint16_t calculated_crc = crc16_ibm(packet, (uint16_t)(1u + payload_len));
     if (received_crc != calculated_crc) {
-        log_printf(LOG_ERR, "Packet CRC error\n");
+        log_printf(LOG_ERR,
+                   "UART3 RX drop: crc_mismatch cmd=0x%02x total_len=%u payload_len=%u "
+                   "crc_rx=0x%04x crc_calc=0x%04x\n",
+                   cmd, (unsigned)packet_len, (unsigned)payload_len,
+                   (unsigned)received_crc, (unsigned)calculated_crc);
         return 0;
     }
 
     uint16_t expected_len = expected_payload_len(cmd);
-    if (expected_len == 0xFFFF) {
+    if (expected_len == 0xFFFFu) {
-        log_printf(LOG_WARN, "Unknown cmd 0x%02x\n", cmd);
+        log_printf(LOG_WARN,
+                   "UART3 RX drop: unknown_cmd cmd=0x%02x total_len=%u payload_len=%u\n",
+                   cmd, (unsigned)packet_len, (unsigned)payload_len);
         return 0;
     }
     if (expected_len != payload_len) {
-        log_printf(LOG_ERR, "Packet len mismatch cmd=0x%02x\n", cmd);
+        log_printf(LOG_ERR,
+                   "UART3 RX drop: len_mismatch cmd=0x%02x expected_payload=%u got_payload=%u "
+                   "total_len=%u\n",
+                   cmd, (unsigned)expected_len, (unsigned)payload_len, (unsigned)packet_len);
         return 0;
     }
 
@@ -425,3 +633,25 @@ static uint8_t process_received_packet(const uint8_t* packet, uint16_t packet_le
     return 1;
 }
 
+static void CCS_UART3_Watchdog(void) {
+    const int32_t since_last_packet = (int32_t)(HAL_GetTick() - uart3_last_packet_tick);
+    const int32_t since_last_reinit = (int32_t)(HAL_GetTick() - uart3_last_reinit_tick);
+
+    if ((since_last_packet >= (int32_t)UART3_REINIT_TIMEOUT_MS) &&
+        (since_last_reinit >= (int32_t)UART3_REINIT_TIMEOUT_MS) &&
+        (huart3.RxState == HAL_UART_STATE_READY)) {
+        uart3_arm_rx_or_log("Watchdog");
+        CCS_LogUart3Error("UART3 watchdog rearm");
+        uart3_last_reinit_tick = HAL_GetTick();
+    }
+}
+
+static void CCS_LogUart3Error(const char *tag) {
+    log_printf(LOG_ERR, "%s: err=0x%08lx g=%lu rx=%lu tx_busy=%u\n",
+               tag,
+               (unsigned long)HAL_UART_GetError(&huart3),
+               (unsigned long)huart3.gState,
+               (unsigned long)huart3.RxState,
+               (unsigned)uart3_tx_busy);
+}
+

Core/Src/serial_control.c

@@ -2,12 +2,18 @@
 #include "usart.h"
 #include "board.h"
 #include "serial.h"
+#include "debug.h"
+#include "isr_opt.h"
 
 // Приватные функции
-static uint32_t calculate_crc32(const uint8_t* data, uint16_t length);
+ISR_FAST static uint32_t calculate_crc32(const uint8_t* data, uint16_t length);
-static uint16_t encode_packet(const uint8_t* payload, uint16_t payload_len, uint8_t* output, uint8_t response_code);
+ISR_FAST static uint16_t encode_packet(const uint8_t* payload, uint16_t payload_len, uint8_t* output, uint8_t response_code);
-static uint8_t parse_packet(const uint8_t* packet_data, uint16_t packet_len, ReceivedCommand_t* out_cmd);
+ISR_FAST static uint8_t parse_packet(const uint8_t* packet_data, uint16_t packet_len, ReceivedCommand_t* out_cmd);
-static uint8_t process_received_packet(SerialControl_t *ctx, const uint8_t* packet_data, uint16_t packet_len);
+ISR_FAST static uint8_t process_received_packet(SerialControl_t *ctx, const uint8_t* packet_data, uint16_t packet_len);
+static void SC_UART2_Watchdog(void);
+static void SC_ArmUart2RxDma(void);
+static void SC_ArmUart5RxDma(void);
+static void SC_LogUartError(const char *tag, UART_HandleTypeDef *huart);
 
 uint8_t test_crc_invalid = 0;
 
@@ -15,6 +21,12 @@ SerialControl_t serial_control;
 // Контекст для приема пакетов по UART5 (однонаправленный UART)
 static SerialControl_t serial_iso;
 volatile SC_Source_t g_sc_command_source = SC_SOURCE_UART2;
+static volatile uint8_t sc_uart2_timed_out = 0;
+static uint32_t sc_uart2_last_packet_tick = 0;
+static uint32_t sc_uart2_last_recover_tick = 0;
+
+#define SC_UART2_RECOVER_GUARD_MS       200u
+#define SC_UART2_PACKET_TIMEOUT_MS     5000u
 
 StatusPacket_t statusPacket = {
     .SOC = 0,
@@ -72,20 +84,28 @@ void SC_Init() {
     // Обнуляем структуру
     memset(&serial_control, 0, sizeof(SerialControl_t));
     memset(&serial_iso, 0, sizeof(serial_iso));
+    sc_uart2_timed_out = 0;
+    sc_uart2_last_packet_tick = HAL_GetTick();
+    sc_uart2_last_recover_tick = sc_uart2_last_packet_tick;
+    SC_ArmUart2RxDma();
+    SC_ArmUart5RxDma();
 }
 
 void SC_Task() {
-	// Запуск приема в режиме прерывания с ожиданием idle
+    static uint32_t tick;
-    if((huart2.RxState == HAL_UART_STATE_READY) && (serial_control.command_ready == 0))    HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
+    if ((int32_t)(HAL_GetTick() - tick) < 1) return;
-    if((huart5.RxState == HAL_UART_STATE_READY))    HAL_UARTEx_ReceiveToIdle_IT(&huart5, serial_iso.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
+    tick = HAL_GetTick();
+    SC_UART2_Watchdog();
+
+	// Запуск приема в режиме DMA + idle
+    SC_ArmUart2RxDma();
+    SC_ArmUart5RxDma();
     
     // Проверка таймаута отправки пакета (больше 100 мс)
     if (huart2.gState == HAL_UART_STATE_BUSY_TX && serial_control.tx_tick != 0) {
-        if ((HAL_GetTick() - serial_control.tx_tick) > 100) {
+        if ((int32_t)(HAL_GetTick() - serial_control.tx_tick) > 100) {
             // Таймаут: принудительно сбрасываем передачу
-            HAL_UART_Abort_IT(&huart2);
+            (void)HAL_UART_AbortTransmit(&huart2);
-            // Выключаем DIR при сбросе передачи
-            HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
             serial_control.tx_tick = 0; // Сбрасываем tick
         }
     }
@@ -93,41 +113,54 @@ void SC_Task() {
     // Проверка наличия принятой команды для обработки
     if (serial_control.command_ready && (huart2.gState != HAL_UART_STATE_BUSY_TX)) {
 //        HAL_Delay(2);
-        SC_CommandHandler(&serial_control.received_command);
+        SC_CommandHandler((ReceivedCommand_t*)&serial_control.received_command);
-        HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
         serial_control.command_ready = 0; // Сбрасываем флаг
+        SC_ArmUart2RxDma();
     }
 }
 
-void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) {
+ISR_FAST void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) {
     if (huart->Instance == huart2.Instance) {
+        if (Size == 0u) {
+            log_printf(LOG_WARN, "UART2 RX idle event with zero size\n");
+        }
+        sc_uart2_last_packet_tick = HAL_GetTick();
+        sc_uart2_last_recover_tick = sc_uart2_last_packet_tick;
+        sc_uart2_timed_out = 0;
         if(!process_received_packet(&serial_control, serial_control.rx_buffer, Size)){
+            log_printf(LOG_WARN, "UART2 RX invalid packet len=%u\n", (unsigned)Size);
             SC_SendPacket(NULL, 0, RESP_INVALID);
         }
         g_sc_command_source = SC_SOURCE_UART2;
-        HAL_UARTEx_ReceiveToIdle_IT(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
+        SC_ArmUart2RxDma();
     } else if (huart->Instance == huart5.Instance) {
+        if (Size == 0u) {
+            log_printf(LOG_WARN, "UART5 RX idle event with zero size\n");
+        }
         if (process_received_packet(&serial_iso, serial_iso.rx_buffer, Size)) {
             g_sc_command_source = SC_SOURCE_UART5;
             SC_CommandHandler((ReceivedCommand_t*)&serial_iso.received_command);
+        } else {
+            log_printf(LOG_WARN, "UART5 RX invalid packet len=%u\n", (unsigned)Size);
         }
-        HAL_UARTEx_ReceiveToIdle_IT(&huart5, serial_iso.rx_buffer, MAX_RX_BUFFER_SIZE - 1);
+        SC_ArmUart5RxDma();
     } else if (huart->Instance == huart3.Instance) {
         CCS_RxEventCallback(huart, Size);
     }
 }
 
-void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) {
+ISR_FAST void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) {
     if (huart->Instance == huart2.Instance) {
-        HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
         serial_control.tx_tick = 0;
+    } else if (huart->Instance == huart3.Instance) {
+        CCS_TxCpltCallback(huart);
     }
 }
 
 // Приватные функции реализации
 
 // Полностью программная реализация CRC-32 (полином CRC32_POLYNOMIAL, порядок little-endian)
-static uint32_t calculate_crc32(const uint8_t* data, uint16_t length) {
+ISR_FAST static uint32_t calculate_crc32(const uint8_t* data, uint16_t length) {
     uint32_t crc = 0xFFFFFFFFu;
 
     for (uint16_t i = 0; i < length; i++) {
@@ -144,7 +177,7 @@ static uint32_t calculate_crc32(const uint8_t* data, uint16_t length) {
     return crc ^ 0xFFFFFFFFu;
 }
 
-static uint16_t encode_packet(const uint8_t* payload, uint16_t payload_len, uint8_t* output, uint8_t response_code) {
+ISR_FAST static uint16_t encode_packet(const uint8_t* payload, uint16_t payload_len, uint8_t* output, uint8_t response_code) {
     uint16_t out_index = 0;
 
     output[out_index++] = response_code;
@@ -177,24 +210,24 @@ static uint16_t encode_packet(const uint8_t* payload, uint16_t payload_len, uint
     return out_index;
 }
 
-void SC_SendPacket(const uint8_t* payload, uint16_t payload_len, uint8_t response_code) {
+ISR_FAST void SC_SendPacket(const uint8_t* payload, uint16_t payload_len, uint8_t response_code) {
     uint16_t packet_len = encode_packet(payload, payload_len, serial_control.tx_buffer, response_code);
 
     if (packet_len > 0) {
-        if (huart2.gState == HAL_UART_STATE_BUSY_TX) {
+        if (huart2.gState != HAL_UART_STATE_READY) {
-            HAL_UART_Abort_IT(&huart2);
+            (void)HAL_UART_AbortTransmit(&huart2);
-            HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_RESET);
+            log_printf(LOG_WARN, "UART2 TX busy, abort transmit before resend\n");
+        }
+        if (HAL_UART_Transmit_DMA(&huart2, serial_control.tx_buffer, packet_len) != HAL_OK) {
+            SC_LogUartError("UART2 TX DMA start failed", &huart2);
+            return;
         }
-
-        HAL_GPIO_WritePin(USART2_DIR_GPIO_Port, USART2_DIR_Pin, GPIO_PIN_SET);
-
-        HAL_UART_Transmit_IT(&huart2, serial_control.tx_buffer, packet_len);
 
         serial_control.tx_tick = HAL_GetTick();
     }
 }
 
-static uint8_t parse_packet(const uint8_t* packet_data, uint16_t packet_len, ReceivedCommand_t* out_cmd) {
+ISR_FAST static uint8_t parse_packet(const uint8_t* packet_data, uint16_t packet_len, ReceivedCommand_t* out_cmd) {
     // if (test_crc_invalid && (packet_data[1] != CMD_GET_STATUS)) {
     //     test_crc_invalid--;
     //     return 0;
@@ -227,7 +260,7 @@ static uint8_t parse_packet(const uint8_t* packet_data, uint16_t packet_len, Rec
     return 1;
 }
 
-static uint8_t process_received_packet(SerialControl_t *ctx, const uint8_t* packet_data, uint16_t packet_len) {
+ISR_FAST static uint8_t process_received_packet(SerialControl_t *ctx, const uint8_t* packet_data, uint16_t packet_len) {
     if (!parse_packet(packet_data, packet_len, (ReceivedCommand_t *)&ctx->received_command)) {
         return 0;
     }
@@ -236,3 +269,68 @@ static uint8_t process_received_packet(SerialControl_t *ctx, const uint8_t* pack
     return 1;
 }
 
+static void SC_UART2_Watchdog(void) {
+    const uint32_t now = HAL_GetTick();
+    const int32_t since_last_packet = (int32_t)(now - sc_uart2_last_packet_tick);
+
+    if (since_last_packet >= (int32_t)SC_UART2_PACKET_TIMEOUT_MS) {
+        if (sc_uart2_timed_out == 0u) {
+            serial_control.command_ready = 0;
+            log_printf(LOG_WARN, "UART2 RX packet timeout (%u ms)\n", (unsigned)SC_UART2_PACKET_TIMEOUT_MS);
+        }
+        sc_uart2_timed_out = 1;
+    } else {
+        sc_uart2_timed_out = 0;
+    }
+
+    if ((huart2.RxState == HAL_UART_STATE_READY) &&
+        ((int32_t)(now - sc_uart2_last_recover_tick) >= (int32_t)SC_UART2_RECOVER_GUARD_MS)) {
+        SC_ArmUart2RxDma();
+        sc_uart2_last_recover_tick = now;
+    }
+}
+
+static void SC_ArmUart2RxDma(void) {
+    if ((huart2.RxState == HAL_UART_STATE_READY) && (serial_control.command_ready == 0)) {
+        if (HAL_UARTEx_ReceiveToIdle_DMA(&huart2, serial_control.rx_buffer, MAX_RX_BUFFER_SIZE - 1) != HAL_OK) {
+            SC_LogUartError("UART2 RX DMA arm failed", &huart2);
+        }
+    }
+}
+
+static void SC_ArmUart5RxDma(void) {
+    if (huart5.RxState == HAL_UART_STATE_READY) {
+        if (HAL_UARTEx_ReceiveToIdle_IT(&huart5, serial_iso.rx_buffer, MAX_RX_BUFFER_SIZE - 1) == HAL_OK) {
+            return;
+        }
+        SC_LogUartError("UART5 RX IT arm failed", &huart5);
+    }
+}
+
+void SC_RecoverUartDma(UART_HandleTypeDef *huart) {
+    if (huart == &huart2) {
+        SC_LogUartError("UART2 recover start", &huart2);
+        (void)HAL_UART_AbortReceive(&huart2);
+        (void)HAL_UART_AbortTransmit(&huart2);
+        serial_control.tx_tick = 0;
+        SC_ArmUart2RxDma();
+        sc_uart2_last_recover_tick = HAL_GetTick();
+    } else if (huart == &huart5) {
+        SC_LogUartError("UART5 recover start", &huart5);
+        (void)HAL_UART_AbortReceive(&huart5);
+        SC_ArmUart5RxDma();
+    }
+}
+
+static void SC_LogUartError(const char *tag, UART_HandleTypeDef *huart) {
+    if (tag == NULL || huart == NULL) {
+        return;
+    }
+    log_printf(LOG_ERR, "%s: instance=0x%08lx err=0x%08lx g=%lu rx=%lu\n",
+               tag,
+               (unsigned long)huart->Instance,
+               (unsigned long)HAL_UART_GetError(huart),
+               (unsigned long)huart->gState,
+               (unsigned long)huart->RxState);
+}
+

Core/Src/stm32f1xx_it.c

@@ -22,6 +22,9 @@
 #include "stm32f1xx_it.h"
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
+#if defined(__GNUC__)
+#pragma GCC optimize("Ofast")
+#endif
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -55,9 +58,15 @@
 /* USER CODE END 0 */
 
 /* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_adc1;
+extern ADC_HandleTypeDef hadc1;
 extern CAN_HandleTypeDef hcan1;
 extern CAN_HandleTypeDef hcan2;
 extern TIM_HandleTypeDef htim3;
+extern DMA_HandleTypeDef hdma_usart2_rx;
+extern DMA_HandleTypeDef hdma_usart2_tx;
+extern DMA_HandleTypeDef hdma_usart3_rx;
+extern DMA_HandleTypeDef hdma_usart3_tx;
 extern UART_HandleTypeDef huart5;
 extern UART_HandleTypeDef huart1;
 extern UART_HandleTypeDef huart2;
@@ -204,17 +213,101 @@ void SysTick_Handler(void)
 /* please refer to the startup file (startup_stm32f1xx.s).                    */
 /******************************************************************************/
 
+/**
+  * @brief This function handles DMA1 channel1 global interrupt.
+  */
+void DMA1_Channel1_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
+  HAL_GPIO_WritePin(DBG4_GPIO_Port, DBG4_Pin, GPIO_PIN_SET);
+  /* USER CODE END DMA1_Channel1_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_adc1);
+  /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
+HAL_GPIO_WritePin(DBG4_GPIO_Port, DBG4_Pin, GPIO_PIN_RESET);
+  /* USER CODE END DMA1_Channel1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 channel2 global interrupt.
+  */
+void DMA1_Channel2_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel2_IRQn 0 */
+
+  /* USER CODE END DMA1_Channel2_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_usart3_tx);
+  /* USER CODE BEGIN DMA1_Channel2_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel2_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 channel3 global interrupt.
+  */
+void DMA1_Channel3_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel3_IRQn 0 */
+
+  /* USER CODE END DMA1_Channel3_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_usart3_rx);
+  /* USER CODE BEGIN DMA1_Channel3_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel3_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 channel6 global interrupt.
+  */
+void DMA1_Channel6_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel6_IRQn 0 */
+
+  /* USER CODE END DMA1_Channel6_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_usart2_rx);
+  /* USER CODE BEGIN DMA1_Channel6_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel6_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 channel7 global interrupt.
+  */
+void DMA1_Channel7_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel7_IRQn 0 */
+
+  /* USER CODE END DMA1_Channel7_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_usart2_tx);
+  /* USER CODE BEGIN DMA1_Channel7_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel7_IRQn 1 */
+}
+
+/**
+  * @brief This function handles ADC1 and ADC2 global interrupts.
+  */
+void ADC1_2_IRQHandler(void)
+{
+  /* USER CODE BEGIN ADC1_2_IRQn 0 */
+HAL_GPIO_WritePin(DBG4_GPIO_Port, DBG4_Pin, GPIO_PIN_SET);
+  /* USER CODE END ADC1_2_IRQn 0 */
+  HAL_ADC_IRQHandler(&hadc1);
+  /* USER CODE BEGIN ADC1_2_IRQn 1 */
+HAL_GPIO_WritePin(DBG4_GPIO_Port, DBG4_Pin, GPIO_PIN_RESET);
+  /* USER CODE END ADC1_2_IRQn 1 */
+}
+
 /**
   * @brief This function handles CAN1 RX0 interrupt.
   */
 void CAN1_RX0_IRQHandler(void)
 {
   /* USER CODE BEGIN CAN1_RX0_IRQn 0 */
-
+  HAL_GPIO_WritePin(DBG5_GPIO_Port, DBG5_Pin, GPIO_PIN_SET);
   /* USER CODE END CAN1_RX0_IRQn 0 */
   HAL_CAN_IRQHandler(&hcan1);
   /* USER CODE BEGIN CAN1_RX0_IRQn 1 */
-
+  HAL_GPIO_WritePin(DBG5_GPIO_Port, DBG5_Pin, GPIO_PIN_RESET);
   /* USER CODE END CAN1_RX0_IRQn 1 */
 }
 
@@ -224,11 +317,11 @@ void CAN1_RX0_IRQHandler(void)
 void TIM3_IRQHandler(void)
 {
   /* USER CODE BEGIN TIM3_IRQn 0 */
-
+  HAL_GPIO_WritePin(DBG4_GPIO_Port, DBG4_Pin, GPIO_PIN_SET);
   /* USER CODE END TIM3_IRQn 0 */
   HAL_TIM_IRQHandler(&htim3);
   /* USER CODE BEGIN TIM3_IRQn 1 */
-
+  HAL_GPIO_WritePin(DBG4_GPIO_Port, DBG4_Pin, GPIO_PIN_RESET);
   /* USER CODE END TIM3_IRQn 1 */
 }
 
@@ -252,11 +345,11 @@ void USART1_IRQHandler(void)
 void USART2_IRQHandler(void)
 {
   /* USER CODE BEGIN USART2_IRQn 0 */
-
+  HAL_GPIO_WritePin(DBG2_GPIO_Port, DBG2_Pin, GPIO_PIN_SET);
   /* USER CODE END USART2_IRQn 0 */
   HAL_UART_IRQHandler(&huart2);
   /* USER CODE BEGIN USART2_IRQn 1 */
-
+  HAL_GPIO_WritePin(DBG2_GPIO_Port, DBG2_Pin, GPIO_PIN_RESET);
   /* USER CODE END USART2_IRQn 1 */
 }
 
@@ -266,11 +359,11 @@ void USART2_IRQHandler(void)
 void USART3_IRQHandler(void)
 {
   /* USER CODE BEGIN USART3_IRQn 0 */
-
+  HAL_GPIO_WritePin(DBG3_GPIO_Port, DBG3_Pin, GPIO_PIN_SET);
   /* USER CODE END USART3_IRQn 0 */
   HAL_UART_IRQHandler(&huart3);
   /* USER CODE BEGIN USART3_IRQn 1 */
-
+  HAL_GPIO_WritePin(DBG3_GPIO_Port, DBG3_Pin, GPIO_PIN_RESET);
   /* USER CODE END USART3_IRQn 1 */
 }
 
@@ -280,11 +373,11 @@ void USART3_IRQHandler(void)
 void UART5_IRQHandler(void)
 {
   /* USER CODE BEGIN UART5_IRQn 0 */
-
+  HAL_GPIO_WritePin(DBG1_GPIO_Port, DBG1_Pin, GPIO_PIN_SET);
   /* USER CODE END UART5_IRQn 0 */
   HAL_UART_IRQHandler(&huart5);
   /* USER CODE BEGIN UART5_IRQn 1 */
-
+  HAL_GPIO_WritePin(DBG1_GPIO_Port, DBG1_Pin, GPIO_PIN_RESET);
   /* USER CODE END UART5_IRQn 1 */
 }
 
@@ -294,11 +387,11 @@ void UART5_IRQHandler(void)
 void CAN2_TX_IRQHandler(void)
 {
   /* USER CODE BEGIN CAN2_TX_IRQn 0 */
-
+  HAL_GPIO_WritePin(DBG5_GPIO_Port, DBG5_Pin, GPIO_PIN_SET);
   /* USER CODE END CAN2_TX_IRQn 0 */
   HAL_CAN_IRQHandler(&hcan2);
   /* USER CODE BEGIN CAN2_TX_IRQn 1 */
-
+  HAL_GPIO_WritePin(DBG5_GPIO_Port, DBG5_Pin, GPIO_PIN_RESET);
   /* USER CODE END CAN2_TX_IRQn 1 */
 }
 
@@ -308,11 +401,11 @@ void CAN2_TX_IRQHandler(void)
 void CAN2_RX1_IRQHandler(void)
 {
   /* USER CODE BEGIN CAN2_RX1_IRQn 0 */
-
+  HAL_GPIO_WritePin(DBG5_GPIO_Port, DBG5_Pin, GPIO_PIN_SET);
   /* USER CODE END CAN2_RX1_IRQn 0 */
   HAL_CAN_IRQHandler(&hcan2);
   /* USER CODE BEGIN CAN2_RX1_IRQn 1 */
-
+  HAL_GPIO_WritePin(DBG5_GPIO_Port, DBG5_Pin, GPIO_PIN_RESET);
   /* USER CODE END CAN2_RX1_IRQn 1 */
 }
 

Core/Src/tim.c

@@ -57,31 +57,31 @@ void MX_TIM3_Init(void)
   {
     Error_Handler();
   }
-  if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
-  {
-    Error_Handler();
-  }
   if (HAL_TIM_OC_Init(&htim3) != HAL_OK)
   {
     Error_Handler();
   }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_OC1;
   sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
   if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
   {
     Error_Handler();
   }
-  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.OCMode = TIM_OCMODE_TIMING;
-  sConfigOC.Pulse = 0;
+  sConfigOC.Pulse = 1;
   sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
   sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
+  if (HAL_TIM_OC_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
   {
     Error_Handler();
   }
-  sConfigOC.OCMode = TIM_OCMODE_TIMING;
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
-  sConfigOC.Pulse = 1;
+  sConfigOC.Pulse = 0;
-  if (HAL_TIM_OC_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
   {
     Error_Handler();
   }
@@ -166,7 +166,7 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
     __HAL_RCC_TIM3_CLK_ENABLE();
 
     /* TIM3 interrupt Init */
-    HAL_NVIC_SetPriority(TIM3_IRQn, 0, 0);
+    HAL_NVIC_SetPriority(TIM3_IRQn, 6, 0);
     HAL_NVIC_EnableIRQ(TIM3_IRQn);
   /* USER CODE BEGIN TIM3_MspInit 1 */
 

Core/Src/usart.c

@@ -28,6 +28,10 @@ UART_HandleTypeDef huart5;
 UART_HandleTypeDef huart1;
 UART_HandleTypeDef huart2;
 UART_HandleTypeDef huart3;
+DMA_HandleTypeDef hdma_usart2_rx;
+DMA_HandleTypeDef hdma_usart2_tx;
+DMA_HandleTypeDef hdma_usart3_rx;
+DMA_HandleTypeDef hdma_usart3_tx;
 
 /* UART5 init function */
 void MX_UART5_Init(void)
@@ -174,7 +178,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
 
     /* UART5 interrupt Init */
-    HAL_NVIC_SetPriority(UART5_IRQn, 0, 0);
+    HAL_NVIC_SetPriority(UART5_IRQn, 5, 0);
     HAL_NVIC_EnableIRQ(UART5_IRQn);
   /* USER CODE BEGIN UART5_MspInit 1 */
 
@@ -204,7 +208,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
     /* USART1 interrupt Init */
-    HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
+    HAL_NVIC_SetPriority(USART1_IRQn, 5, 0);
     HAL_NVIC_EnableIRQ(USART1_IRQn);
   /* USER CODE BEGIN USART1_MspInit 1 */
 
@@ -235,8 +239,41 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
 
     __HAL_AFIO_REMAP_USART2_ENABLE();
 
+    /* USART2 DMA Init */
+    /* USART2_RX Init */
+    hdma_usart2_rx.Instance = DMA1_Channel6;
+    hdma_usart2_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+    hdma_usart2_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_usart2_rx.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_usart2_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    hdma_usart2_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+    hdma_usart2_rx.Init.Mode = DMA_NORMAL;
+    hdma_usart2_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
+    if (HAL_DMA_Init(&hdma_usart2_rx) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(uartHandle,hdmarx,hdma_usart2_rx);
+
+    /* USART2_TX Init */
+    hdma_usart2_tx.Instance = DMA1_Channel7;
+    hdma_usart2_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
+    hdma_usart2_tx.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_usart2_tx.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_usart2_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    hdma_usart2_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+    hdma_usart2_tx.Init.Mode = DMA_NORMAL;
+    hdma_usart2_tx.Init.Priority = DMA_PRIORITY_HIGH;
+    if (HAL_DMA_Init(&hdma_usart2_tx) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(uartHandle,hdmatx,hdma_usart2_tx);
+
     /* USART2 interrupt Init */
-    HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
+    HAL_NVIC_SetPriority(USART2_IRQn, 2, 0);
     HAL_NVIC_EnableIRQ(USART2_IRQn);
   /* USER CODE BEGIN USART2_MspInit 1 */
 
@@ -267,8 +304,41 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
 
     __HAL_AFIO_REMAP_USART3_PARTIAL();
 
+    /* USART3 DMA Init */
+    /* USART3_RX Init */
+    hdma_usart3_rx.Instance = DMA1_Channel3;
+    hdma_usart3_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+    hdma_usart3_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_usart3_rx.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_usart3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    hdma_usart3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+    hdma_usart3_rx.Init.Mode = DMA_NORMAL;
+    hdma_usart3_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
+    if (HAL_DMA_Init(&hdma_usart3_rx) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(uartHandle,hdmarx,hdma_usart3_rx);
+
+    /* USART3_TX Init */
+    hdma_usart3_tx.Instance = DMA1_Channel2;
+    hdma_usart3_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
+    hdma_usart3_tx.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_usart3_tx.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_usart3_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    hdma_usart3_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+    hdma_usart3_tx.Init.Mode = DMA_NORMAL;
+    hdma_usart3_tx.Init.Priority = DMA_PRIORITY_HIGH;
+    if (HAL_DMA_Init(&hdma_usart3_tx) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(uartHandle,hdmatx,hdma_usart3_tx);
+
     /* USART3 interrupt Init */
-    HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
+    HAL_NVIC_SetPriority(USART3_IRQn, 2, 0);
     HAL_NVIC_EnableIRQ(USART3_IRQn);
   /* USER CODE BEGIN USART3_MspInit 1 */
 
@@ -335,6 +405,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5|GPIO_PIN_6);
 
+    /* USART2 DMA DeInit */
+    HAL_DMA_DeInit(uartHandle->hdmarx);
+    HAL_DMA_DeInit(uartHandle->hdmatx);
+
     /* USART2 interrupt Deinit */
     HAL_NVIC_DisableIRQ(USART2_IRQn);
   /* USER CODE BEGIN USART2_MspDeInit 1 */
@@ -355,6 +429,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
 
+    /* USART3 DMA DeInit */
+    HAL_DMA_DeInit(uartHandle->hdmarx);
+    HAL_DMA_DeInit(uartHandle->hdmatx);
+
     /* USART3 interrupt Deinit */
     HAL_NVIC_DisableIRQ(USART3_IRQn);
   /* USER CODE BEGIN USART3_MspDeInit 1 */

Core/Startup/startup_stm32f107vctx.s

@@ -59,7 +59,6 @@ defined in linker script */
   .weak Reset_Handler
   .type Reset_Handler, %function
 Reset_Handler:
-	ldr   sp, =_estack     /* set stack pointer */
 
 /* Call the clock system initialization function.*/
     bl  SystemInit

Debug/Core/Src/adc.cyclo

@@ -1,3 +1,5 @@
-../Core/Src/adc.c:30:6:MX_ADC1_Init	3
+../Core/Src/adc.c:29:6:ADC_ScanStart	2
-../Core/Src/adc.c:72:6:HAL_ADC_MspInit	2
+../Core/Src/adc.c:37:15:HAL_ADC_ConvCpltCallback	2
-../Core/Src/adc.c:106:6:HAL_ADC_MspDeInit	2
+../Core/Src/adc.c:59:6:MX_ADC1_Init	8
+../Core/Src/adc.c:146:6:HAL_ADC_MspInit	3
+../Core/Src/adc.c:200:6:HAL_ADC_MspDeInit	2

Debug/Core/Src/board.cyclo

@@ -1,13 +1,13 @@
-../Core/Src/board.c:19:6:RELAY_Write	9
+../Core/Src/board.c:18:6:RELAY_Write	9
-../Core/Src/board.c:52:9:RELAY_Read	1
+../Core/Src/board.c:51:9:RELAY_Read	1
-../Core/Src/board.c:57:9:IN_ReadInput	8
+../Core/Src/board.c:56:9:IN_ReadInput	8
-../Core/Src/board.c:78:9:GetBoardTemp	1
+../Core/Src/board.c:77:9:GetBoardTemp	1
-../Core/Src/board.c:90:6:Init_Peripheral	1
+../Core/Src/board.c:89:6:Init_Peripheral	1
 ../Core/Src/board.c:106:7:pt1000_to_temperature	1
 ../Core/Src/board.c:117:7:calculate_NTC_resistance	2
 ../Core/Src/board.c:132:9:CONN_ReadTemp	4
-../Core/Src/board.c:169:9:GBT_ReadTemp	1
+../Core/Src/board.c:152:9:GBT_ReadTemp	1
-../Core/Src/board.c:173:6:ADC_Select_Channel	2
+../Core/Src/board.c:156:6:ADC_Select_Channel	2
-../Core/Src/board.c:184:9:ADC_TryLock	4
+../Core/Src/board.c:167:9:ADC_TryLock	4
-../Core/Src/board.c:200:6:ADC_LockBlocking	2
+../Core/Src/board.c:183:6:ADC_LockBlocking	2
-../Core/Src/board.c:206:6:ADC_Unlock	2
+../Core/Src/board.c:189:6:ADC_Unlock	2

Debug/Core/Src/charger_control.cyclo

@@ -1,5 +1,5 @@
-../Core/Src/charger_control.c:11:6:CONN_Init	1
+../Core/Src/charger_control.c:12:6:CONN_Init	1
-../Core/Src/charger_control.c:19:6:CONN_Loop	6
+../Core/Src/charger_control.c:20:6:CONN_Loop	6
-../Core/Src/charger_control.c:41:6:CONN_Task	5
+../Core/Src/charger_control.c:42:6:CONN_Task	1
-../Core/Src/charger_control.c:57:6:CONN_SetState	16
+../Core/Src/charger_control.c:49:6:CONN_SetState	16
-../Core/Src/charger_control.c:83:6:CONN_PrintChargingTotal	1
+../Core/Src/charger_control.c:75:6:CONN_PrintChargingTotal	1

Debug/Core/Src/cp.cyclo

@@ -1,9 +1,9 @@
-../Core/Src/cp.c:13:17:CP_ReadAdcChannel	1
+../Core/Src/cp.c:19:16:CP_ReadVoltageMv	1
-../Core/Src/cp.c:26:16:CP_ReadVoltageMv	1
+../Core/Src/cp.c:36:6:CP_Init	1
-../Core/Src/cp.c:39:6:CP_Init	1
+../Core/Src/cp.c:53:6:CP_SetDuty	1
-../Core/Src/cp.c:56:6:CP_SetDuty	1
+../Core/Src/cp.c:66:9:CP_GetDuty	1
-../Core/Src/cp.c:69:9:CP_GetDuty	1
+../Core/Src/cp.c:70:9:CP_GetVoltage	1
-../Core/Src/cp.c:73:9:CP_GetVoltage	1
+../Core/Src/cp.c:75:12:CP_GetState	12
-../Core/Src/cp.c:77:12:CP_GetState	12
+../Core/Src/cp.c:99:12:CP_GetFilteredState	1
-../Core/Src/cp.c:101:6:CP_Loop	1
+../Core/Src/cp.c:103:6:CP_FilterState	5
-../Core/Src/cp.c:105:6:HAL_TIM_OC_DelayElapsedCallback	4
+../Core/Src/cp.c:131:6:CP_Loop	5

Debug/Core/Src/dma.cyclo

@@ -0,0 +1 @@
+../Core/Src/dma.c:39:6:MX_DMA_Init	1

Debug/Core/Src/main.cyclo

@@ -1,8 +1,9 @@
-../Core/Src/main.c:64:13:VectorBase_Config	1
+../Drivers/CMSIS/Include/core_cm3.h:1762:34:__NVIC_SystemReset	1
-../Core/Src/main.c:75:9:ED_TraceWarning	3
+../Core/Src/main.c:65:13:VectorBase_Config	1
-../Core/Src/main.c:87:6:ED_Delay	3
+../Core/Src/main.c:76:9:ED_TraceWarning	3
-../Core/Src/main.c:106:6:StopButtonControl	2
+../Core/Src/main.c:88:6:ED_Delay	3
-../Core/Src/main.c:117:13:CAN1_MinimalReInit	3
+../Core/Src/main.c:108:6:StopButtonControl	8
-../Core/Src/main.c:135:5:main	1
+../Core/Src/main.c:151:13:CAN1_MinimalReInit	3
-../Core/Src/main.c:216:6:SystemClock_Config	4
+../Core/Src/main.c:169:5:main	1
-../Core/Src/main.c:276:6:Error_Handler	1
+../Core/Src/main.c:250:6:SystemClock_Config	4
+../Core/Src/main.c:310:6:Error_Handler	1

Debug/Core/Src/psu_control.cyclo

@@ -1,12 +1,12 @@
-../Core/Src/psu_control.c:33:13:PSU_SwitchState	1
+../Core/Src/psu_control.c:34:13:PSU_SwitchState	1
-../Core/Src/psu_control.c:38:17:PSU_StateTime	1
+../Core/Src/psu_control.c:39:17:PSU_StateTime	1
-../Core/Src/psu_control.c:42:6:HAL_CAN_RxFifo1MsgPendingCallback	9
+../Core/Src/psu_control.c:43:15:HAL_CAN_RxFifo1MsgPendingCallback	9
-../Core/Src/psu_control.c:116:6:PSU_CAN_FilterInit	2
+../Core/Src/psu_control.c:117:6:PSU_CAN_FilterInit	2
-../Core/Src/psu_control.c:139:6:PSU_Init	1
+../Core/Src/psu_control.c:140:6:PSU_Init	1
-../Core/Src/psu_control.c:156:6:PSU_Enable	3
+../Core/Src/psu_control.c:158:6:PSU_Enable	3
-../Core/Src/psu_control.c:168:6:PSU_SetHVMode	2
+../Core/Src/psu_control.c:170:6:PSU_SetHVMode	2
-../Core/Src/psu_control.c:175:6:PSU_SetVoltageCurrent	5
+../Core/Src/psu_control.c:177:6:PSU_SetVoltageCurrent	5
-../Core/Src/psu_control.c:202:6:PSU_SendCmd	4
+../Core/Src/psu_control.c:204:6:PSU_SendCmd	4
-../Core/Src/psu_control.c:238:10:max	2
+../Core/Src/psu_control.c:240:10:max	2
-../Core/Src/psu_control.c:243:6:PSU_ReadWrite	5
+../Core/Src/psu_control.c:245:6:PSU_ReadWrite	8
-../Core/Src/psu_control.c:276:6:PSU_Task	41
+../Core/Src/psu_control.c:289:6:PSU_Task	41

Debug/Core/Src/rgb_controller.cyclo

@@ -1,6 +1,6 @@
-../Core/Src/rgb_controller.c:92:6:LED_Write	16
+../Core/Src/rgb_controller.c:102:6:LED_Write	18
-../Core/Src/rgb_controller.c:146:6:interpolateColors	3
+../Core/Src/rgb_controller.c:164:6:interpolateColors	3
-../Core/Src/rgb_controller.c:164:6:RGB_SetColor	1
+../Core/Src/rgb_controller.c:182:6:RGB_SetColor	1
-../Core/Src/rgb_controller.c:170:6:LED_SetColor	1
+../Core/Src/rgb_controller.c:188:6:LED_SetColor	1
-../Core/Src/rgb_controller.c:175:6:LED_Init	1
+../Core/Src/rgb_controller.c:193:6:LED_Init	1
-../Core/Src/rgb_controller.c:207:6:LED_Task	10
+../Core/Src/rgb_controller.c:225:6:LED_Task	10

Debug/Core/Src/serial.cyclo

@@ -1,15 +1,20 @@
-../Drivers/CMSIS/Include/core_cm3.h:1762:34:__NVIC_SystemReset	1
+../Core/Src/serial.c:70:22:uart3_log_hal_error	3
-../Core/Src/serial.c:51:6:CCS_RxEventCallback	4
+../Core/Src/serial.c:90:22:uart3_arm_rx_or_log	3
-../Core/Src/serial.c:61:6:CCS_SerialLoop	41
+../Core/Src/serial.c:106:15:CCS_RxEventCallback	4
-../Core/Src/serial.c:206:6:CCS_Init	1
+../Core/Src/serial.c:129:15:HAL_UART_ErrorCallback	5
-../Core/Src/serial.c:218:17:crc16_ibm	4
+../Core/Src/serial.c:149:6:CCS_TxCpltCallback	4
-../Core/Src/serial.c:233:17:CCS_BuildPacket	4
+../Core/Src/serial.c:165:6:CCS_SerialLoop	62
-../Core/Src/serial.c:249:13:CCS_SendPacket	2
+../Core/Src/serial.c:365:6:CCS_Init	1
-../Core/Src/serial.c:257:13:CCS_SendResetReason	1
+../Core/Src/serial.c:380:26:crc16_ibm	3
-../Core/Src/serial.c:261:6:CCS_SendEmergencyStop	1
+../Core/Src/serial.c:395:17:CCS_BuildPacket	4
-../Core/Src/serial.c:265:6:CCS_SendStart	1
+../Core/Src/serial.c:411:13:CCS_SendPacket	4
-../Core/Src/serial.c:269:13:CCS_CalculateEnergy	2
+../Core/Src/serial.c:428:13:CCS_SendResetReason	1
-../Core/Src/serial.c:284:13:send_state	2
+../Core/Src/serial.c:432:6:CCS_SendEmergencyStop	1
-../Core/Src/serial.c:311:17:expected_payload_len	11
+../Core/Src/serial.c:436:6:CCS_SendStart	1
-../Core/Src/serial.c:327:13:apply_command	13
+../Core/Src/serial.c:440:13:CCS_CalculateEnergy	2
-../Core/Src/serial.c:394:16:process_received_packet	6
+../Core/Src/serial.c:455:13:send_state	3
+../Core/Src/serial.c:485:26:expected_payload_len	2
+../Core/Src/serial.c:501:22:apply_command	15
+../Core/Src/serial.c:583:25:process_received_packet	8
+../Core/Src/serial.c:636:13:CCS_UART3_Watchdog	4
+../Core/Src/serial.c:649:13:CCS_LogUart3Error	1

Debug/Core/Src/serial_control.cyclo

@@ -1,10 +1,15 @@
-../Core/Src/serial_control.c:59:6:ReadVersion	1
+../Core/Src/serial_control.c:71:6:ReadVersion	1
-../Core/Src/serial_control.c:71:6:SC_Init	1
+../Core/Src/serial_control.c:83:6:SC_Init	1
-../Core/Src/serial_control.c:77:6:SC_Task	9
+../Core/Src/serial_control.c:94:6:SC_Task	7
-../Core/Src/serial_control.c:102:6:HAL_UARTEx_RxEventCallback	6
+../Core/Src/serial_control.c:122:15:HAL_UARTEx_RxEventCallback	8
-../Core/Src/serial_control.c:120:6:HAL_UART_TxCpltCallback	2
+../Core/Src/serial_control.c:152:15:HAL_UART_TxCpltCallback	3
-../Core/Src/serial_control.c:130:17:calculate_crc32	4
+../Core/Src/serial_control.c:163:26:calculate_crc32	3
-../Core/Src/serial_control.c:147:17:encode_packet	6
+../Core/Src/serial_control.c:180:26:encode_packet	5
-../Core/Src/serial_control.c:180:6:SC_SendPacket	3
+../Core/Src/serial_control.c:213:15:SC_SendPacket	4
-../Core/Src/serial_control.c:197:16:parse_packet	4
+../Core/Src/serial_control.c:230:25:parse_packet	3
-../Core/Src/serial_control.c:230:16:process_received_packet	2
+../Core/Src/serial_control.c:263:25:process_received_packet	2
+../Core/Src/serial_control.c:272:13:SC_UART2_Watchdog	5
+../Core/Src/serial_control.c:293:13:SC_ArmUart2RxDma	4
+../Core/Src/serial_control.c:301:13:SC_ArmUart5RxDma	3
+../Core/Src/serial_control.c:310:6:SC_RecoverUartDma	3
+../Core/Src/serial_control.c:325:13:SC_LogUartError	3

Debug/Core/Src/stm32f1xx_it.cyclo

@@ -1,17 +1,23 @@
-../Core/Src/stm32f1xx_it.c:75:6:NMI_Handler	1
+../Core/Src/stm32f1xx_it.c:84:6:NMI_Handler	1
-../Core/Src/stm32f1xx_it.c:90:6:HardFault_Handler	1
+../Core/Src/stm32f1xx_it.c:99:6:HardFault_Handler	1
-../Core/Src/stm32f1xx_it.c:105:6:MemManage_Handler	1
+../Core/Src/stm32f1xx_it.c:114:6:MemManage_Handler	1
-../Core/Src/stm32f1xx_it.c:120:6:BusFault_Handler	1
+../Core/Src/stm32f1xx_it.c:129:6:BusFault_Handler	1
-../Core/Src/stm32f1xx_it.c:135:6:UsageFault_Handler	1
+../Core/Src/stm32f1xx_it.c:144:6:UsageFault_Handler	1
-../Core/Src/stm32f1xx_it.c:150:6:SVC_Handler	1
+../Core/Src/stm32f1xx_it.c:159:6:SVC_Handler	1
-../Core/Src/stm32f1xx_it.c:163:6:DebugMon_Handler	1
+../Core/Src/stm32f1xx_it.c:172:6:DebugMon_Handler	1
-../Core/Src/stm32f1xx_it.c:176:6:PendSV_Handler	1
+../Core/Src/stm32f1xx_it.c:185:6:PendSV_Handler	1
-../Core/Src/stm32f1xx_it.c:189:6:SysTick_Handler	1
+../Core/Src/stm32f1xx_it.c:198:6:SysTick_Handler	1
-../Core/Src/stm32f1xx_it.c:210:6:CAN1_RX0_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:219:6:DMA1_Channel1_IRQHandler	1
-../Core/Src/stm32f1xx_it.c:224:6:TIM3_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:233:6:DMA1_Channel2_IRQHandler	1
-../Core/Src/stm32f1xx_it.c:238:6:USART1_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:247:6:DMA1_Channel3_IRQHandler	1
-../Core/Src/stm32f1xx_it.c:252:6:USART2_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:261:6:DMA1_Channel6_IRQHandler	1
-../Core/Src/stm32f1xx_it.c:266:6:USART3_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:275:6:DMA1_Channel7_IRQHandler	1
-../Core/Src/stm32f1xx_it.c:280:6:UART5_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:289:6:ADC1_2_IRQHandler	1
-../Core/Src/stm32f1xx_it.c:294:6:CAN2_TX_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:303:6:CAN1_RX0_IRQHandler	1
-../Core/Src/stm32f1xx_it.c:308:6:CAN2_RX1_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:317:6:TIM3_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:331:6:USART1_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:345:6:USART2_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:359:6:USART3_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:373:6:UART5_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:387:6:CAN2_TX_IRQHandler	1
+../Core/Src/stm32f1xx_it.c:401:6:CAN2_RX1_IRQHandler	1

Debug/Core/Src/subdir.mk

@@ -12,6 +12,7 @@ C_SRCS += \
 ../Core/Src/cp.c \
 ../Core/Src/crc.c \
 ../Core/Src/debug.c \
+../Core/Src/dma.c \
 ../Core/Src/gpio.c \
 ../Core/Src/main.c \
 ../Core/Src/meter.c \
@@ -39,6 +40,7 @@ C_DEPS += \
 ./Core/Src/cp.d \
 ./Core/Src/crc.d \
 ./Core/Src/debug.d \
+./Core/Src/dma.d \
 ./Core/Src/gpio.d \
 ./Core/Src/main.d \
 ./Core/Src/meter.d \
@@ -66,6 +68,7 @@ OBJS += \
 ./Core/Src/cp.o \
 ./Core/Src/crc.o \
 ./Core/Src/debug.o \
+./Core/Src/dma.o \
 ./Core/Src/gpio.o \
 ./Core/Src/main.o \
 ./Core/Src/meter.o \
@@ -93,7 +96,7 @@ Core/Src/%.o Core/Src/%.su Core/Src/%.cyclo: ../Core/Src/%.c Core/Src/subdir.mk
 clean: clean-Core-2f-Src
 
 clean-Core-2f-Src:
-	-$(RM) ./Core/Src/adc.cyclo ./Core/Src/adc.d ./Core/Src/adc.o ./Core/Src/adc.su ./Core/Src/board.cyclo ./Core/Src/board.d ./Core/Src/board.o ./Core/Src/board.su ./Core/Src/can.cyclo ./Core/Src/can.d ./Core/Src/can.o ./Core/Src/can.su ./Core/Src/charger_control.cyclo ./Core/Src/charger_control.d ./Core/Src/charger_control.o ./Core/Src/charger_control.su ./Core/Src/cp.cyclo ./Core/Src/cp.d ./Core/Src/cp.o ./Core/Src/cp.su ./Core/Src/crc.cyclo ./Core/Src/crc.d ./Core/Src/crc.o ./Core/Src/crc.su ./Core/Src/debug.cyclo ./Core/Src/debug.d ./Core/Src/debug.o ./Core/Src/debug.su ./Core/Src/gpio.cyclo ./Core/Src/gpio.d ./Core/Src/gpio.o ./Core/Src/gpio.su ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/meter.cyclo ./Core/Src/meter.d ./Core/Src/meter.o ./Core/Src/meter.su ./Core/Src/psu_control.cyclo ./Core/Src/psu_control.d ./Core/Src/psu_control.o ./Core/Src/psu_control.su ./Core/Src/rgb_controller.cyclo ./Core/Src/rgb_controller.d ./Core/Src/rgb_controller.o ./Core/Src/rgb_controller.su ./Core/Src/rtc.cyclo ./Core/Src/rtc.d ./Core/Src/rtc.o ./Core/Src/rtc.su ./Core/Src/serial.cyclo ./Core/Src/serial.d ./Core/Src/serial.o ./Core/Src/serial.su ./Core/Src/serial_control.cyclo ./Core/Src/serial_control.d ./Core/Src/serial_control.o ./Core/Src/serial_control.su ./Core/Src/serial_handler.cyclo ./Core/Src/serial_handler.d ./Core/Src/serial_handler.o ./Core/Src/serial_handler.su ./Core/Src/sma_filter.cyclo ./Core/Src/sma_filter.d ./Core/Src/sma_filter.o ./Core/Src/sma_filter.su ./Core/Src/soft_rtc.cyclo ./Core/Src/soft_rtc.d ./Core/Src/soft_rtc.o ./Core/Src/soft_rtc.su ./Core/Src/stm32f1xx_hal_msp.cyclo ./Core/Src/stm32f1xx_hal_msp.d ./Core/Src/stm32f1xx_hal_msp.o ./Core/Src/stm32f1xx_hal_msp.su ./Core/Src/stm32f1xx_it.cyclo ./Core/Src/stm32f1xx_it.d ./Core/Src/stm32f1xx_it.o ./Core/Src/stm32f1xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32f1xx.cyclo ./Core/Src/system_stm32f1xx.d ./Core/Src/system_stm32f1xx.o ./Core/Src/system_stm32f1xx.su ./Core/Src/tim.cyclo ./Core/Src/tim.d ./Core/Src/tim.o ./Core/Src/tim.su ./Core/Src/usart.cyclo ./Core/Src/usart.d ./Core/Src/usart.o ./Core/Src/usart.su
+	-$(RM) ./Core/Src/adc.cyclo ./Core/Src/adc.d ./Core/Src/adc.o ./Core/Src/adc.su ./Core/Src/board.cyclo ./Core/Src/board.d ./Core/Src/board.o ./Core/Src/board.su ./Core/Src/can.cyclo ./Core/Src/can.d ./Core/Src/can.o ./Core/Src/can.su ./Core/Src/charger_control.cyclo ./Core/Src/charger_control.d ./Core/Src/charger_control.o ./Core/Src/charger_control.su ./Core/Src/cp.cyclo ./Core/Src/cp.d ./Core/Src/cp.o ./Core/Src/cp.su ./Core/Src/crc.cyclo ./Core/Src/crc.d ./Core/Src/crc.o ./Core/Src/crc.su ./Core/Src/debug.cyclo ./Core/Src/debug.d ./Core/Src/debug.o ./Core/Src/debug.su ./Core/Src/dma.cyclo ./Core/Src/dma.d ./Core/Src/dma.o ./Core/Src/dma.su ./Core/Src/gpio.cyclo ./Core/Src/gpio.d ./Core/Src/gpio.o ./Core/Src/gpio.su ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/meter.cyclo ./Core/Src/meter.d ./Core/Src/meter.o ./Core/Src/meter.su ./Core/Src/psu_control.cyclo ./Core/Src/psu_control.d ./Core/Src/psu_control.o ./Core/Src/psu_control.su ./Core/Src/rgb_controller.cyclo ./Core/Src/rgb_controller.d ./Core/Src/rgb_controller.o ./Core/Src/rgb_controller.su ./Core/Src/rtc.cyclo ./Core/Src/rtc.d ./Core/Src/rtc.o ./Core/Src/rtc.su ./Core/Src/serial.cyclo ./Core/Src/serial.d ./Core/Src/serial.o ./Core/Src/serial.su ./Core/Src/serial_control.cyclo ./Core/Src/serial_control.d ./Core/Src/serial_control.o ./Core/Src/serial_control.su ./Core/Src/serial_handler.cyclo ./Core/Src/serial_handler.d ./Core/Src/serial_handler.o ./Core/Src/serial_handler.su ./Core/Src/sma_filter.cyclo ./Core/Src/sma_filter.d ./Core/Src/sma_filter.o ./Core/Src/sma_filter.su ./Core/Src/soft_rtc.cyclo ./Core/Src/soft_rtc.d ./Core/Src/soft_rtc.o ./Core/Src/soft_rtc.su ./Core/Src/stm32f1xx_hal_msp.cyclo ./Core/Src/stm32f1xx_hal_msp.d ./Core/Src/stm32f1xx_hal_msp.o ./Core/Src/stm32f1xx_hal_msp.su ./Core/Src/stm32f1xx_it.cyclo ./Core/Src/stm32f1xx_it.d ./Core/Src/stm32f1xx_it.o ./Core/Src/stm32f1xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32f1xx.cyclo ./Core/Src/system_stm32f1xx.d ./Core/Src/system_stm32f1xx.o ./Core/Src/system_stm32f1xx.su ./Core/Src/tim.cyclo ./Core/Src/tim.d ./Core/Src/tim.o ./Core/Src/tim.su ./Core/Src/usart.cyclo ./Core/Src/usart.d ./Core/Src/usart.o ./Core/Src/usart.su
 
 .PHONY: clean-Core-2f-Src
 

Debug/Core/Src/usart.cyclo

@@ -1,6 +1,6 @@
-../Core/Src/usart.c:33:6:MX_UART5_Init	2
+../Core/Src/usart.c:37:6:MX_UART5_Init	2
-../Core/Src/usart.c:62:6:MX_USART1_UART_Init	2
+../Core/Src/usart.c:66:6:MX_USART1_UART_Init	2
-../Core/Src/usart.c:91:6:MX_USART2_UART_Init	2
+../Core/Src/usart.c:95:6:MX_USART2_UART_Init	2
-../Core/Src/usart.c:120:6:MX_USART3_UART_Init	2
+../Core/Src/usart.c:124:6:MX_USART3_UART_Init	2
-../Core/Src/usart.c:148:6:HAL_UART_MspInit	5
+../Core/Src/usart.c:152:6:HAL_UART_MspInit	9
-../Core/Src/usart.c:279:6:HAL_UART_MspDeInit	5
+../Core/Src/usart.c:349:6:HAL_UART_MspDeInit	5

Debug/objects.list

@@ -5,6 +5,7 @@
 "./Core/Src/cp.o"
 "./Core/Src/crc.o"
 "./Core/Src/debug.o"
+"./Core/Src/dma.o"
 "./Core/Src/gpio.o"
 "./Core/Src/main.o"
 "./Core/Src/meter.o"

docs/CHAT_SESSION_CHANGELOG.md

@@ -0,0 +1,133 @@
+# Журнал изменений (сессия чата): `fork/CCSModuleSW30Web`
+
+Документ фиксирует доработки проекта **CCSModuleSW30Web** в ветке/каталоге форка  
+`/Users/colorbass/STM32CubeIDE/workspace_1.12.0/fork/CCSModuleSW30Web`, обсуждавшиеся и вносившиеся в рамках описанной сессии (UART, ADC/DMA, CP, отладка IRQ, оптимизация `-Ofast` для кода из прерываний).
+
+---
+
+## 1. UART и протокол
+
+### 1.1. UART3 (Everest / `serial.c`)
+
+- Таймаут «нет связи с хостом»:** `EVEREST_TIMEOUT_MS` = **5000** мс.
+- Жёсткий реинициал при отсутствии RX:** `UART3_REINIT_TIMEOUT_MS` = **1500** мс (с защитой от слишком частых реинициалов через `uart3_last_reinit_tick`).
+- Расширено логирование путей сброса/ошибок приёма и ошибок HAL для диагностики «таймаут без остановки UART3».
+- Колбэки и вспомогательные функции, вызываемые из контекста прерывания, помечены **`ISR_FAST`** (см. раздел 6):  
+  `CCS_RxEventCallback`, `HAL_UART_ErrorCallback`, `uart3_log_hal_error`, `uart3_arm_rx_or_log`, цепочка разбора пакета (`process_received_packet`, `crc16_ibm`, `expected_payload_len`, `apply_command`).
+
+### 1.2. UART2 / `serial_control.c`
+
+- Отдельная логика **`SC_UART2_Watchdog()`**, вызывается из **`SC_Task()`** (не из IRQ).
+- Константы:
+  - **`SC_UART2_REINIT_TIMEOUT_MS`** = **500** мс — порог для жёсткого реинициала при отсутствии пакетов;
+  - **`SC_UART2_PACKET_TIMEOUT_MS`** = **5000** мс — таймаут коммуникации.
+- Сценарий **новый пакет при `BUSY_TX`**: при необходимости **`Abort_IT`**, сброс направления RS-485, затем повторная инициализация UART и приём `ReceiveToIdle_IT` (защита от обрыва TX из-за агрессивного watchdog).
+- Отдельная ветка **жёсткого реинициала при `BUSY_TX`** с логом `USART2 BUSY_TX: hard reinit` (отслеживание `sc_uart2_last_busy_tx_reinit_packet_tick`).
+- HAL-колбэки **`HAL_UARTEx_RxEventCallback`**, **`HAL_UART_TxCpltCallback`** помечены **`ISR_FAST`**.
+
+### 1.3. `SC_SendPacket` и стек CRC/кодирования
+
+- Для единообразной оптимизации пути «IRQ → ответ» на функции **`calculate_crc32`**, **`encode_packet`**, **`parse_packet`**, **`process_received_packet`** и публичную **`SC_SendPacket`** добавлен **`ISR_FAST`**.
+- В **`Core/Inc/serial_control.h`**: подключение **`isr_opt.h`**, прототип **`ISR_FAST void SC_SendPacket(...)`** (согласованность с определением в `.c`).
+
+**Замечание:** `SC_SendPacket` вызывается и из основного потока; для GCC вся функция компилируется с `-Ofast`. При необходимости строгого разделения можно вынести отдельную версию «только из IRQ».
+
+---
+
+## 2. Отладочные линии DBG в `stm32f1xx_it.c`
+
+На время входа/выхода из выбранных обработчиков прерываний поднимается/опускается соответствующий GPIO — удобно для осциллографа (длительность IRQ).
+
+| Линия | Обработчик |
+|--------|------------|
+| **DBG1** | `UART5_IRQHandler` |
+| **DBG2** | `USART2_IRQHandler` |
+| **DBG3** | `USART3_IRQHandler` |
+| **DBG4** | `DMA1_Channel1_IRQHandler`, `ADC1_2_IRQHandler`, `TIM3_IRQHandler` |
+| **DBG5** | `CAN1_RX0_IRQHandler`, `CAN2_TX_IRQHandler`, `CAN2_RX1_IRQHandler` |
+| — | `USART1_IRQHandler` — без обёртки DBG (по согласованию) |
+
+В **`DMA1_Channel1_IRQHandler`** вызывается **`HAL_DMA_IRQHandler(&hdma_adc1)`** для цепочки ADC+DMA.
+
+Для всего файла **`stm32f1xx_it.c`** под GCC добавлено:
+
+```c
+#pragma GCC optimize("Ofast")
+```
+
+(в блоке `USER CODE BEGIN Includes`).
+
+---
+
+## 3. ADC: DMA, глобальные данные, колбэк
+
+- Файлы **`adc.c` / `adc.h`**: структура **`ADC_ScanData_t`**, глобально **`volatile ADC_ScanData_t adc_data`** с полями сырых каналов (`in3_raw`, `cp_raw`, `ntc1_raw`, `ntc2_raw`, `temp_sensor_raw`, `vrefint_raw` и т.д. по фактическому объявлению в заголовке).
+- **`HAL_ADC_ConvCpltCallback`**: копирование из буфера DMA в **`adc_data`**, помечен **`ISR_FAST`**.
+- Публичная **`ADC_ScanStart()`** — запуск сканирования (после калибровки вызывается из инициализации платы).
+- **`board.c`**: после **`HAL_ADCEx_Calibration_Start`** вызывается **`ADC_ScanStart()`**; **`CONN_ReadTemp`** читает **`adc_data.ntc1_raw` / `ntc2_raw`** вместо блокирующего опроса ADC.
+
+**Диагностика (из обсуждения):** если не вызываются **`HAL_ADC_ConvCpltCallback`** / **`HAL_DMA_IRQHandler`**, проверять: срабатывание триггера ADC (например, **TIM3 TRGO**), работу TIM3, порядок инициализации DMA/NVIC, срабатывание **`DMA1_Channel1_IRQHandler`**.
+
+---
+
+## 4. CP (`cp.c` / `cp.h`)
+
+- Измерение опоры на **`adc_data.cp_raw`** (и при необходимости **`vrefint_raw`** по текущей реализации в коде).
+- Логика классификации/порогов приведена к варианту, согласованному с основным **CCSModuleSW30Web** (не форк).
+- Сэмпл по таймеру: уход от тяжёлой работы в IRQ OC — использование **`HAL_TIM_OC_Start`** без прерывания по сравнению, обновление напряжения в **`CP_GetVoltage()`** / основном цикле (**`CP_Loop`** опирается на **`CP_GetState()`** и т.п. по фактическому коду).
+
+---
+
+## 5. Отладочный UART (`debug.c`)
+
+При **`#ifndef USE_WEB_INTERFACE`** (или эквивалентной ветке сборки в файле): колбэк **`HAL_UARTEx_RxEventCallback`** и **`debug_rx_interrupt`** помечены **`ISR_FAST`**.
+
+---
+
+## 6. Оптимизация `-Ofast` для кода из прерываний
+
+### 6.1. Макрос `ISR_FAST`
+
+Файл **`Core/Inc/isr_opt.h`**:
+
+- **GCC:** `#define ISR_FAST __attribute__((optimize("Ofast")))`
+- **Иное:** пустой макрос.
+
+### 6.2. Где используется (по состоянию репозитория)
+
+| Файл | Элементы с `ISR_FAST` / pragma |
+|------|--------------------------------|
+| `stm32f1xx_it.c` | `#pragma GCC optimize("Ofast")` на весь файл (GCC) |
+| `adc.c` | `HAL_ADC_ConvCpltCallback` |
+| `serial.c` | `CCS_RxEventCallback`, `HAL_UART_ErrorCallback`, `uart3_log_hal_error`, `uart3_arm_rx_or_log`, `process_received_packet`, `crc16_ibm`, `expected_payload_len`, `apply_command` |
+| `serial_control.c` | `HAL_UARTEx_RxEventCallback`, `HAL_UART_TxCpltCallback`, `calculate_crc32`, `encode_packet`, `parse_packet`, `process_received_packet`, `SC_SendPacket` |
+| `serial_control.h` | прототип `SC_SendPacket` + `#include "isr_opt.h"` |
+| `psu_control.c` | `HAL_CAN_RxFifo1MsgPendingCallback` |
+| `debug.c` | см. раздел 5 |
+
+---
+
+## 7. Ограничения и переносимость
+
+- **`ISR_FAST`** и pragma в **`stm32f1xx_it.c`** рассчитаны на **GCC** (STM32CubeIDE по умолчанию). Для **IAR / ARM Compiler 6** потребуется отдельная стратегия (прагмы/ключи проекта).
+- **`-Ofast`** допускает агрессивные преобразования с плавающей точкой и перестановки, влияющие на строго воспроизводимую арифметику; для критичных вычислений вне IRQ при необходимости ограничивайте область оптимизации.
+
+---
+
+## 8. Затронутые пути (краткий список)
+
+- `Core/Inc/isr_opt.h` — новый/центральный заголовок оптимизации IRQ.
+- `Core/Inc/serial_control.h` — `isr_opt.h`, `ISR_FAST` у `SC_SendPacket`.
+- `Core/Src/stm32f1xx_it.c` — DBG, DMA ADC, pragma `Ofast`.
+- `Core/Src/adc.c`, `Core/Inc/adc.h` — DMA, `adc_data`, `ADC_ScanStart`, колбэк.
+- `Core/Src/board.c` — калибровка, старт скана, температура из `adc_data`.
+- `Core/Src/cp.c`, `Core/Inc/cp.h` — CP и ADC.
+- `Core/Src/serial.c` — UART3, таймауты, логи, `ISR_FAST`.
+- `Core/Src/serial_control.c` — UART2, watchdog, `ISR_FAST`.
+- `Core/Src/psu_control.c` — CAN RX callback.
+- `Core/Src/debug.c` — отладочный UART под условием сборки.
+- `Core/Src/dma.c`, `gpio.c`, `main.h` — по необходимости для DMA1 Ch1 и DBG-пинов.
+
+---
+
+*Документ сгенерирован для фиксации контекста сессии; при дальнейших правках кода имеет смысл обновлять соответствующие разделы вручную.*